Manual de instrucciones de la lámpara de techo convertible mediana Hinkley Facet 46991BX

1. Información importante de seguridad

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries. Keep these instructions for future reference.

• Seguridad eléctrica: Always disconnect power at the main circuit breaker or fuse box before installation, servicing, or changing bulbs. Ensure all electrical connections comply with local codes and ordinances, as well as the National Electrical Code (NEC) and Canadian Electrical Code (CEC).
• Electricista calificado: Si no está seguro acerca del cableado o la instalación, consulte a un electricista autorizado calificado.
• Toma de tierra: Este accesorio debe estar conectado a tierra correctamente.
• Requisitos de la bombilla: Utilice únicamente el tipo de bombilla y el agua especificados.tagmi. No exceda el wat máximotage indicated on the fixture. This fixture requires (5) 12W Medium LED Bulbs (not included).
• Ubicación: This fixture is suitable for dry (indoor) locations only. Do not install in damp o ambientes húmedos.
• Manejo: Handle glass components with care. Wear gloves during installation to prevent fingerprints and cuts.

2. Contenido del paquete

Verifique que todos los componentes enumerados a continuación estén presentes y sin daños antes de continuar con la instalación.

• Fixture Assembly (Hexagonal body with etched glass)
• Dosel de montaje
• (1) 6-inch Down Rod
• (2) 12-inch Down Rods
• Kit de hardware de montaje (tornillos, tuercas para cables, etc.)
• Manual de instrucciones

This image displays the Hinkley Facet Medium Convertible Ceiling Light in its Black Oxide finish, showcasing its hexagonal design and etched glass.

3. Instrucciones de instalación

3.1 Antes de comenzar

1. Apague la energía en el disyuntor.
2. Carefully unpack the fixture and components. Retain all packaging until installation is complete.
3. Review the diagrams and ensure you have all necessary tools (e.g., screwdriver, wire strippers, ladder).

3.2 Mounting Options (Pendant or Flush Mount)

This fixture is convertible and can be installed as either a pendant or a flush mount. The included down rods allow for adjustable height in pendant configuration, suitable for even or sloped ceilings.

This diagram illustrates the dimensions of the light fixture when installed as a pendant, including its maximum height of 43.5 inches and diameter of 16.5 inches.

This diagram shows the dimensions of the light fixture when installed as a flush mount, indicating a height of 16 inches and a diameter of 16.5 inches.

3.3 Cableado

1. Fije el soporte de montaje a la caja de conexiones usando los tornillos proporcionados.
2. Connect the fixture's ground wire (usually bare copper or green) to the house ground wire using a wire nut.
3. Connect the fixture's neutral wire (usually white) to the house neutral wire (white) using a wire nut.
4. Connect the fixture's hot wire (usually black) to the house hot wire (black) using a wire nut.
5. Introduzca con cuidado todos los cables en la caja de conexiones.

3.4 Montaje definitivo

1. Secure the canopy to the mounting bracket with the decorative nuts or screws.
2. Install the appropriate number of down rods for your desired pendant height, or directly attach the fixture for flush mount.
3. Install five (5) 12W Medium LED Bulbs (not included) into the sockets. Do not overtighten.
4. Restablezca la energía en el disyuntor y pruebe el dispositivo.

Un detallado view of the Hinkley Facet light fixture in Black Oxide, configured as a pendant, highlighting its layered hexagonal structure.

4. Operación

Once installed and powered, the Hinkley Facet Ceiling Light operates like any standard hardwired light fixture. It is designed to be dimmable, allowing you to adjust the light output with a compatible dimmer switch (sold separately).

• Tipo de bombilla: Uses (5) 12W Medium LED Bulbs. Ensure bulbs are fully seated in their sockets.
• Funcionalidad regulable: For dimming capabilities, connect the fixture to a compatible LED dimmer switch. Follow the dimmer switch manufacturer's instructions for installation and operation.

5. Mantenimiento

Regular maintenance will help preserve the appearance and functionality of your Hinkley Facet Ceiling Light.

• Limpieza: Always turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Reemplazo de bombilla: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching. Replace with the same type and wattage of bulb to maintain optimal performance and safety.
• Inspección: Periodically check for loose connections or damaged wiring. If any issues are found, disconnect power and consult a qualified electrician.

6. Solución de problemas

Si su dispositivo no funciona correctamente, consulte los siguientes problemas y soluciones comunes:

• La luz no enciende:
  • Compruebe si se disparó el disyuntor.
  • Asegúrese de que las bombillas estén instaladas correctamente y no estén quemadas.
  • Verifique que todas las conexiones de cables estén seguras.
• Flickering or dimming issues:
  • Ensure bulbs are compatible with the dimmer switch (if installed).
  • Compruebe si hay conexiones de bombillas sueltas.
  • Verify proper wiring to the dimmer switch.
• Humming noise:
  • Some LED bulbs or dimmer switches may produce a slight hum. If excessive, try different compatible bulbs or a different dimmer.

If troubleshooting steps do not resolve the issue, contact Hinkley customer support or a qualified electrician.

7. Especificaciones

8. Garantía y soporte

This Hinkley lighting fixture comes with a limited warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions.

• Tipo de garantía: Limitado
• Atención al cliente: For technical assistance, replacement parts, or warranty claims, please contact Hinkley customer service. Contact information can typically be found on the Hinkley websitio o en el embalaje.