Producto terminadoview
The JessEm Large Imperial Tool Setting Gauge is a precision measuring instrument designed for accurate height and depth settings on various woodworking tools, including router tables and table saws. Crafted from durable 14-gauge stainless steel, this gauge offers reliability and long-lasting performance. Its versatile design allows for both vertical and horizontal use, making it an essential tool for precise adjustments in your workshop.
Figura 1: Frente view of the JessEm Large Imperial Tool Setting Gauge.
Configuración
The JessEm Large Imperial Tool Setting Gauge comes ready for immediate use. No assembly is required. Before first use, ensure the gauge is clean and free of any debris that might affect its accuracy.
- Inspección: Visually inspect the gauge for any signs of damage or manufacturing defects.
- Limpieza: Wipe down the gauge with a clean, dry cloth to remove any dust or residue from packaging.
- Familiarización: Take a moment to familiarize yourself with the gauge's components, including the main body, the adjustable arm, the solid brass knob, and the imperial scale markings.
Instrucciones de funcionamiento
This section details the steps for using your JessEm Large Imperial Tool Setting Gauge to achieve precise height and depth measurements.
Adjusting the Gauge
- Afloje la perilla: To adjust the height or depth, gently loosen the solid brass knob located on the side of the gauge. This will allow the adjustable arm to move freely.
- Coloque el medidor: Place the base of the gauge on the reference surface (e.g., router table top, table saw top).
- Medida del conjunto: Raise or lower the adjustable arm until the desired measurement on the imperial scale aligns with the top of your router bit, saw blade, or other tool. The gauge features micro-detents, allowing for precise 1/16-inch increments for fine adjustments.
- Apriete la perilla: Once the desired measurement is set, tighten the solid brass knob to secure the adjustable arm in place. This ensures the measurement remains stable during use.
Figura 2: Primer plano view of the imperial scale and micro-detents for precise adjustments.
Uso vertical y horizontal
The JessEm Large Imperial Tool Setting Gauge is designed for maximum versatility and can be used in both vertical and horizontal orientations.
- Uso vertical: Typically used for setting the height of router bits or saw blades from a flat surface. Place the gauge upright on the table.
- Uso horizontal: Can be laid flat to measure depths or distances from an edge. This is useful for setting fence distances or other horizontal measurements.
Figure 3: The gauge can be positioned at various angles for versatile measurement applications.
Figura 4: Example of the gauge being used to set the height of a table saw blade.
Viaje Máximo
The gauge offers a maximum travel of 3-3/8 inches, providing a wide measuring range suitable for various woodworking tasks, from small detail work to larger projects.
Mantenimiento
Proper maintenance will ensure the longevity and accuracy of your JessEm Large Imperial Tool Setting Gauge.
- Limpieza: After each use, wipe the gauge with a clean, dry, soft cloth to remove sawdust, oils, or other residues. Avoid using abrasive cleaners or solvents that could damage the finish or markings.
- Almacenamiento: Store the gauge in a dry environment, away from excessive moisture or extreme temperatures. Keeping it in a protective case or drawer will prevent scratches and dings.
- Lubricación: Periodically, a very small amount of light machine oil can be applied to the moving parts (e.g., the adjustable arm slide) to ensure smooth operation. Wipe off any excess oil.
- Verificación de calibración: While the gauge is designed for precision, it's good practice to occasionally check its accuracy against a known standard ruler or measuring device.
Solución de problemas
This section addresses common issues you might encounter with your tool setting gauge.
| Problema | Posible causa | Solución |
|---|---|---|
| Gauge arm is stiff or difficult to move. | Accumulation of dust/debris; lack of lubrication. | Clean the sliding mechanism thoroughly. Apply a small amount of light machine oil to the sliding surfaces. |
| Medidas inexactas. | Gauge not properly tightened; debris on measuring surface; gauge is damaged. | Ensure the brass knob is tightened securely after setting. Clean the base and measuring arm. If damage is suspected, contact JessEm support. |
| Brass knob is loose or doesn't hold. | Worn threads or internal mechanism. | Inspect the knob and its threading. If worn, contact JessEm support for replacement parts or service. |
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | 07310 |
| Material | Acero inoxidable calibre 14 |
| Sistema de medición | Imperial |
| Viajes Max | 3-3/8 pulgadas |
| Incrementos de ajuste | 1/16-inch (micro-detents) |
| Peso del artículo | 2.1 libras |
| Dimensiones del paquete | 10.59 x 6.77 x 2.24 pulgadas |
| Fuente de poder | Accionado a mano |
| Componentes incluidos | Tool Setting Gauge |
| Fabricante | JessEm |
| País natal | Canadá |
Garantía y soporte
Specific warranty details for the JessEm Large Imperial Tool Setting Gauge are not provided within this manual. For information regarding warranty coverage, product support, or to purchase replacement parts, please visit the official JessEm websitio o comuníquese directamente con su servicio de atención al cliente.
Puede encontrar más información y datos de contacto en el JessEm Store on Amazon o el fabricante oficial websitio.