Introducción
This manual provides detailed instructions for the installation, operation, and maintenance of your Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight. Please read these instructions thoroughly before beginning installation and retain them for future reference. This product is designed for use in existing 5 or 6-inch recessed can housings.
Información de seguridad
ADVERTENCIA: Riesgo de descarga eléctrica. Desconecte la alimentación desde el fusible o disyuntor antes de realizar cualquier instalación o mantenimiento.
- Este producto debe ser instalado de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y el funcionamiento del producto y los peligros involucrados.
- Ensure the electrical rating of the fixture is compatible with your power supply (120 VAC).
- No modifique ni altere el dispositivo. Cualquier modificación podría anular la garantía y crear riesgos de seguridad.
- Adecuado para damp Ubicaciones.
- ETL Listed for safety and quality assurance.
Contenido del paquete
- 1 x Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight
- 1 x E-26 Quick Connect Adapter
Image: The Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight, showing the main unit, E-26 quick connect adapter, and the attached torsion springs.
Características
- Eficiencia energética: 15W LED equivalent to 90W incandescent light, consuming less power.
- Brillo alto: 1200 Lumens output for ample iluminación.
- 5 CCT Seleccionables: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using a switch on the fixture.
- Regulable: Smooth dimming from 10% to 100% (compatible with most standard LED dimmers).
- Diseño antideslumbrante: Deep smooth recess baffle and anti-glare LED COB technology reduce harsh glare.
- Alto CRI: 90 CRI provides accurate color appearance.
- Construcción duradera: Made with a cast aluminum body for lightweight and robust performance.
- Uso versátil: Suitable for residential and commercial installations, including damp locations like showers or bathrooms.
Image: An installed Maxxima downlight demonstrating its anti-glare design in a room setting.
Configuración e instalación
Follow these steps to properly install your Maxxima LED Downlight. Ensure power is OFF before starting.
- Apagar la energía: Locate the circuit breaker or fuse box controlling the light fixture you are replacing and turn off the power.
- Prepare Existing Can: Remove the existing bulb and trim from your 5 or 6-inch recessed can housing.
- Seleccionar temperatura de color (CCT): On the back of the LED downlight, locate the CCT selection switch. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch. This setting can be changed later if needed.
- Connect E-26 Adapter: Connect the E-26 Quick Connect Adapter to the socket in your existing recessed can.
- Conectar Downlight: Plug the quick connect cable from the LED downlight into the E-26 adapter.
- Insertar en la lata: Carefully push the LED downlight into the recessed can. The torsion springs on the sides of the downlight will compress and hold the fixture securely in place against the ceiling. Ensure the springs engage with the torsion clips inside the can housing. If the light does not sit flush, ensure the existing socket is pushed up as far as possible or disconnected if it obstructs the fixture.
- Restaurar energía: Once the downlight is securely installed, restore power at the circuit breaker or fuse box.
Image: The CCT selection switch on the back of the downlight, allowing choice between 2700K, 3000K, 3500K, 4000K, and 5000K.
Image: The E-26 Quick Connect Adapter connected to the downlight's wiring.
Video: Official Maxxima installation guide for the 6-inch Anti-Glare Retrofit LED Downlight, demonstrating the CCT selection and installation process.
Instrucciones de funcionamiento
- Encendido/apagado: Utilice su interruptor de pared estándar para encender o apagar la lámpara.
- Selección de temperatura de color: The CCT (Correlated Color Temperature) is set using a switch on the back of the fixture during installation. To change the CCT after installation, you must remove the fixture from the ceiling, adjust the switch, and then reinstall.
- Atenuación: This downlight is dimmable from 10% to 100% with compatible LED dimmers. Ensure your dimmer switch is rated for LED lighting to avoid flickering or performance issues.
Mantenimiento
- Limpieza: To clean the fixture, ensure power is off. Use a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Reemplazo de bombilla: This fixture features an integrated LED, meaning no bulb replacement is required. The LED is rated for 50,000 lifetime hours.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | No power, loose connection, faulty fixture. | Check circuit breaker. Ensure all connections are secure. If problem persists, contact support. |
| La luz parpadea o se atenúa incorrectamente. | Atenuador incompatible, cableado suelto. | Asegúrese de utilizar un regulador de intensidad compatible con LED. Compruebe las conexiones del cableado. |
| Fixture does not sit flush with the ceiling. | Torsion springs not properly engaged, obstruction in can, existing socket too low. | Ensure torsion springs are fully engaged with the can's clips. Check for any obstructions inside the can. Adjust the height of the existing socket or remove it if it interferes with the fixture's depth. Bend the torsion springs from near the tops to maintain tension if they have lost shape. |
Presupuesto
| Especificación | Detalle |
|---|---|
| Número de modelo | LMR-61505B |
| Tamaño | 6 pulgadas |
| Quétage | 15 W |
| Salida de lúmenes | 1200 lúmenes |
| Temperatura de color (CCT) | 2700K / 3000K / 3500K / 4000K / 5000K Selectable |
| Regulable | 10% - 100% |
| CRI | 90 |
| Volumentage | 120 V CA |
| Haz de propagación | 36° |
| Dimensiones | 7.1" de largo x 7.1" de ancho x 4.5" de alto |
| Material | Aluminio |
| Lifetime Hours | 50,000 horas |
| Certificaciones | ETL Listed, T20 California Compliant |
| Uso en interiores y exteriores | Interior (Damp Calificado) |
Garantía
This Maxxima LED Downlight comes with a 3 año de garantía from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.
Apoyo
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Maxxima customer service. Refer to the product packaging or the Maxxima webSitio para obtener información de contacto actualizada.
