Manual del usuario del kit extensor de vídeo inalámbrico DIGITUS DS-55324

1. Introducción

The DIGITUS DS-55324 Wireless Video Extender Kit provides a solution for wirelessly transmitting Ultra-HD 4K/30Hz audio and video signals. This kit operates on a point-to-point connection, featuring a USB-C transmitter and an HDMI receiver, allowing for easy plug-and-play setup without the need for drivers or software. It supports a transmission range of up to 30 meters with a clear line of sight and ensures secure data transmission through 128-bit AES encoding and WPA2 protocol. This device is compatible with HDMI 2.0, DP 1.2, and HDCP 2.2/1.4 standards.

Figure 1: DIGITUS DS-55324 Wireless Video Extender Kit components.

2. Contenido del paquete

Por favor, verifique que todos los artículos estén presentes y en buenas condiciones al abrir el paquete:

• 1 x Sender Unit (Transmitter with USB-C connector)
• 1 x Receiver Unit (Receiver with HDMI connector)
• 2 cable USB-A a USB-C (100 cm)

Figure 2: Included cables for power and connection.

3. Características del producto y másview

The DS-55324 kit offers the following key features:

• Wireless transmission of HDMI signals up to 30 meters (with free view).
• Point-to-point connection: 1 sender (source) to 1 receiver (output device).
• Supports resolutions up to 4K UHD (2160p/30Hz).
• HDMI 2.0, DP 1.2, and HDCP 2.2/1.3 compatibility.
• Power supplied via USB-C connection.
• Enhanced security with 128-bit AES Encoding and WPA2 Protocol.

Figure 3: Key features and button location on the extender units.

Figure 4: Location of the reset button and USB Type-C power input.

4. Instrucciones de configuración

Follow these steps to set up your DIGITUS Wireless Video Extender Kit:

1. Conecte el transmisor: Plug the USB-C connector of the Sender Unit (Transmitter) into the USB-C port of your source device (e.g., laptop, PC, smartphone with USB-C video output).
2. Conecte el receptor: Plug the HDMI connector of the Receiver Unit into an available HDMI input port on your display device (e.g., monitor, projector, TV).
3. Power the Units: Use the provided USB-A to USB-C cables to connect both the Sender Unit and Receiver Unit to a power source. This can be a USB port on your source/display device or a separate USB power adapter (5V/1A minimum, not included). Ensure both units receive stable power.
4. Establecer conexión: Once both units are powered and connected, they will automatically attempt to pair. The LED indicators on the units will show their status. A stable connection is indicated when the video signal appears on your display.
5. Troubleshooting (if no signal): If no signal is displayed, ensure both units are powered, correctly connected, and within the 30-meter range with minimal obstructions. You may also press the button on each unit to initiate pairing manually if needed.

Figure 5: Connection diagram for the wireless video extender.

Figure 6: Wireless signal transmission from source to display.

Figura 7: detallada view of the USB-C (transmitter) and HDMI (receiver) ports.

5. Instrucciones de funcionamiento

Once the setup is complete and the units are paired, the extender operates automatically:

• Transmisión automática de señales: The video and audio signal from your source device will be wirelessly transmitted to your display.
• Resolución: The system will automatically negotiate the best possible resolution up to 4K/30Hz, depending on the capabilities of your source and display devices.
• Función del botón: The button on each unit can be used to initiate or re-establish pairing if the connection is lost or not automatically established. A short press typically triggers a re-scan for the partner unit.

6. Mantenimiento

To ensure the longevity and optimal performance of your DIGITUS Wireless Video Extender Kit, follow these maintenance guidelines:

• Limpieza: Use a soft, dry cloth to clean the units. Do not use liquid cleaners or aerosols, as they may damage the components.
• Almacenamiento: Guarde las unidades en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas cuando no estén en uso.
• Manejo: Avoid dropping the units or subjecting them to strong impacts. Do not attempt to disassemble the units, as this will void any warranty and may cause damage.
• Ventilación: Ensure the ventilation slots on the units are not blocked to prevent overheating.

7. Solución de problemas

If you encounter issues with your wireless video extender, refer to the following common problems and solutions:

8. Especificaciones

9. Garantía y soporte

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official DIGITUS webSitio. Conserve su comprobante de compra para reclamaciones de garantía.