Ledvion LED Wall Light Instruction Manual

1. Introducción

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Ledvion Square LED Wall Light. This 9W, 3000K, IP54 rated fixture is designed to provide double-faced up and down illumination for both indoor and outdoor environments. Please read these instructions carefully before installation and retain them for future reference.

2. Información de seguridad

• Desconecte siempre la fuente de alimentación antes de intentar cualquier instalación, mantenimiento o limpieza.
• Installation should be performed by a qualified electrician or competent person if you are unsure about electrical wiring.
• Asegúrese de que el producto esté correctamente conectado a tierra para evitar descargas eléctricas.
• No modifique el producto de ninguna manera, ya que esto puede anular la garantía y crear riesgos de seguridad.
• Avoid looking directly into the LED light source when it is active, as it may cause eye strain.
• This product is rated IP54, meaning it is protected against dust ingress and splashing water from any direction. However, it should not be submerged in water.

3. ¿Qué hay en la caja?

Verifique que todos los componentes estén presentes antes de comenzar la instalación:

Imagen: Componentes incluidos en el embalaje del producto.

• 1x Ledvion Square LED Wall Light
• 2x tacos de pared para tornillos
• 2x tornillos
• 1x llave Allen
• 1x Manual de instrucciones

4. Especificaciones

Imagen: Dimensiones del producto para la planificación de la instalación.

Image: Detail of the integrated COB LED light source.

5. Configuración e instalación

The Ledvion LED Wall Light is designed for straightforward wall-mounted installation. Follow these steps carefully:

1. Preparación: Ensure the power supply to the installation area is turned off at the main circuit breaker. Gather necessary tools (drill, screwdriver, pencil, measuring tape).
2. Calificación: Choose a suitable location on the wall. Use the fixture or mounting bracket (if separate) to mark the drilling points for the screws.
3. Perforación: Perfore los agujeros en los puntos marcados. Inserte los tacos incluidos en los agujeros.
4. Alambrado: Connect the electrical wires from your mains supply to the terminal block inside the fixture. Ensure correct polarity: Live (L), Neutral (N), and Earth/Ground. Secure all connections firmly.
5. Montaje: Align the fixture with the wall plugs and secure it using the provided screws. Tighten the screws until the fixture is firmly attached to the wall.
6. Comprobación final: Ensure all connections are secure and the fixture is stable. Restore power to the circuit.

Imagen: Example of the wall light installed, demonstrating its up and down illumination.

6. Instrucciones de funcionamiento

The Ledvion LED Wall Light operates via a standard wall switch connected to its power supply. Once installed and wired correctly, simply toggle the connected wall switch to turn the light ON or OFF. The integrated COB LED provides a consistent 3000K warm white light with 800 lumens of brightness.

7. Mantenimiento

To ensure the longevity and optimal performance of your Ledvion LED Wall Light, follow these maintenance guidelines:

• Limpieza: Desconecte la alimentación antes de limpiar. Limpie el exterior del aparato con un paño suave.amp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or the LED components.
• Inspección: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and address them promptly.
• Clasificación IP54: The IP54 rating protects against dust and splashes. While suitable for outdoor use, avoid direct high-pressure water jets or prolonged submersion.

Image: The IP54 rating ensures protection against dust and splashes.

8. Solución de problemas

If you encounter issues with your Ledvion LED Wall Light, refer to the following common troubleshooting steps:

• La luz no enciende:
  • Verifique si la fuente de alimentación del dispositivo está activa.
  • Asegúrese de que el interruptor de pared que controla la luz esté en la posición "ENCENDIDO".
  • Verify all electrical connections are secure and correctly wired (Live, Neutral, Earth).
  • Verifique el disyuntor para ver si hay algún circuito disparado.
• La luz parpadea o es tenue:
  • Asegúrese de tener un suministro de energía estable.
  • Verifique si hay conexiones de cableado sueltas.
  • Confirm the fixture is receiving the correct voltage (230 V).
• Water ingress or condensation:
  • While IP54 rated, ensure the fixture is installed correctly and all seals are intact.
  • If water is present, disconnect power immediately and inspect for damage or improper installation.

Si estos pasos no resuelven el problema, comuníquese con el servicio de atención al cliente.

9. Garantía

This Ledvion LED Wall Light comes with a 3 año de garantía from the date of purchase. This warranty covers defects in materials and workmanship under normal use. The robust aluminium housing is designed for long-lasting performance and durability.

Image: Warranty information for the Ledvion LED Wall Light.

Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

10. Eficiencia energética

This Ledvion LED Wall Light has an energy efficiency rating of F according to the latest EU energy labeling standards. LED technology is inherently energy-efficient, providing significant savings compared to traditional lighting sources.

Image: EU Energy Label for model LVO10066.

For more detailed information on the product's energy performance, you can refer to the EPREL database using the following link: Información del producto EPREL

11. Soporte

For further assistance, technical support, or warranty claims, please contact your retailer or the manufacturer, Ledvion. Refer to your purchase documentation for specific contact details.