1. Introducción
Thank you for choosing the Sunco LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: Sunco 4ft LED Shop Light
2. Información de seguridad
To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts, abrasions, and other hazards, please read all warnings and instructions included with and on the fixture box and all fixture labels.
- ADVERTENCIA: Riesgo de descarga eléctrica. Desconecte la energía en el fusible o disyuntor antes de realizar la instalación o el mantenimiento.
- ADVERTENCIA: Riesgo de incendio. Conductores de alimentación a una temperatura mínima de 90 °C. Consulte a un electricista cualificado para garantizar que el conductor del circuito derivado sea el correcto.
- WARNING: Risk of Injury. Use gafas de seguridad y guantes durante la instalación y el mantenimiento.
- Este accesorio está destinado a Sólo para uso en interiores. Do not use in wet locations or where directly exposed to water.
- Este accesorio es no regulable. Do not connect to a dimmer switch.
- No modifique el dispositivo. Cualquier modificación podría anular la garantía y crear riesgos de seguridad.
- Asegúrese de que el volumen de suministrotage es compatible con el accesorio (120V-277V).
3. Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- 2 x Sunco LED Shop Light Fixtures
- Mounting Equipment (Surface)
4. Configuración e instalación
Follow these steps for a quick and easy setup. Always ensure power is disconnected at the source before proceeding.
- Preparar la ubicación de montaje: Identify the desired ceiling location for the fixture. Ensure the mounting surface is capable of supporting the fixture's weight.
- Instalar el hardware de montaje: Use the provided mounting equipment to securely attach the fixture housing to the ceiling. Refer to Image 4.1, Step 1.
- Conectar cables: Carefully connect the electrical wires from the power supply to the fixture's wires. Ensure proper polarity (live to live, neutral to neutral, ground to ground). Refer to Image 4.1, Step 2.
- Accesorio seguro: Once wiring is complete, snap the fixture into place, ensuring it is firmly seated against the mounting surface. Refer to Image 4.1, Step 3.
Imagen 4.1: Pasos de instalación
Daisy Chain Linkability
This fixture features daisy chain linkability, allowing multiple units to be connected for extended lighting coverage. To link fixtures, knock out the designated punch hole on the end of the fixture and connect the wires to the next unit. Ensure the total wattagLa cantidad de luminarias conectadas no excede la capacidad del circuito.
Image 4.2: Daisy Chain Connection Point
5. Instrucciones de funcionamiento
The Sunco LED Shop Light is designed for simple operation and provides instant illumination upon activation.
Selectable Color Temperature (CCT)
Your fixture includes an integrated switch to select between three color temperatures: 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White). Locate the CCT switch on the fixture and slide it to your desired setting before or after installation. The light will turn on instantaneously at the selected color temperature.
Image 5.1: Selectable CCT Options
6. Mantenimiento
The Sunco LED Shop Light is designed for long-lasting performance with minimal maintenance.
- Limpieza: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or optical components.
- LED: The integrated LED light source is designed for a long lifespan (50,000 hours) and is not user-replaceable.
7. Solución de problemas
If you experience issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no enciende | Sin suministro de energía Cableado incorrecto CCT switch not set | Verifique el disyuntor y el interruptor de pared. Verify all wire connections are secure and correct. Ensure the CCT switch is set to a valid color temperature. |
| La luz parpadea | Suministro de energía inestable Conexión de cableado suelta | Asegúrese de que la fuente de alimentación sea estable y esté dentro del volumen especificado.tage rango. Compruebe que todas las conexiones de cables estén bien apretadas. |
| La luz no es tan brillante como se esperaba. | Configuración incorrecta del CCT Polvo o residuos en la lente | Adjust the CCT switch to a brighter setting (e.g., 6000K). Clean the lens according to maintenance instructions. |
8. Especificaciones
| Marca | Iluminación Sunco |
| Número de modelo | WR_PR8-WH-4060K-2PK |
| Dimensiones del producto | 48" de largo x 8.58" de ancho x 2.56" de alto |
| Quétage | 60 W |
| Brillo | 7200 lúmenes |
| Eficiencia | 118 LM / W |
| Temperatura de color (CCT) | Selectable 4000K, 5000K, 6000K |
| Volumentage | 120 V-277 V |
| Regulable | No |
| Uso en interiores y exteriores | Solo en interiores |
| Tipo de instalación | Montaje empotrado |
| Característica especial | Enlazable |
| Tipo de fuente de luz | CONDUJO |
| Material | Acero aleado, policarbonato |
| Vida media | 50,000 horas |
| Certificaciones | ETL, FCC, RoHS |
| Número de artículos | 2 (paquete) |
9. Garantía y soporte
Sunco Lighting respalda la calidad de sus productos.
- Garantía: Este producto está respaldado por una Garantía de 3 años A partir de la fecha de compra. Conserve el comprobante de compra para reclamaciones de garantía.
- Atención al cliente: For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable support specialists are available to assist you.
Video 9.1: Get to Know Sunco Lighting - Learn about Sunco's commitment to quality and customer satisfaction.
