Bitvae X122 Toothbrush Cleaner & Holder Instruction Manual

1. Introducción

The Bitvae X122 Toothbrush Cleaner & Holder is designed to maintain optimal oral hygiene by providing a clean and dry environment for your toothbrushes. This device features automatic UV cleaning and air drying, an LED smart screen for status updates, and a rechargeable battery for convenience. It is compatible with most toothbrush types, ensuring your brush is ready for use every time.

Figure 1: The Bitvae X122 Toothbrush Cleaner and Holder ensures your toothbrushes are clean and ready for use.

2. Contenido del paquete

Upon opening your Bitvae X122 package, please ensure all the following items are included:

• 1 limpiador de cepillos de dientes Bitvae
• 1 x soporte de pared
• 2 x Double-Sided Strong Adhesive Strips
• 1 x cable USB (tipo C)
• 1 x Manual de instrucciones

Note: A 5V-1A adapter is required for charging and is not included in the package.

3. Especificaciones

4. Configuración

The Bitvae X122 Toothbrush Cleaner & Holder is designed for easy installation on smooth surfaces.

1. Preparar superficie: Clean the desired smooth surface (e.g., tile, marble, mirror, glass) thoroughly. Ensure it is dry and free of dust or grease.
2. Fijar el soporte de pared: Peel off the protective film from one side of the double-sided strong adhesive strip. Apply it firmly to the back of the wall bracket. Peel off the other side of the film and press the wall bracket firmly onto the cleaned surface. Hold for 30 seconds to ensure strong adhesion.
3. Dispositivo de montaje: Align the Bitvae Toothbrush Cleaner with the installed wall bracket and slide it downwards from top to bottom until it clicks securely into place.

Figure 2: Visual guide for the easy installation process of the Bitvae X122.

The device can be easily removed from the wall bracket for charging or cleaning by sliding it upwards.

5. Instrucciones de funcionamiento

The Bitvae X122 features intelligent operation for hands-free convenience.

1. Encendido: For first-time use or after charging, press and hold the power button (located on the LED screen) for 3 seconds until the screen lights up to turn on the device.
2. Abrir/cerrar puerta: Wave your hand within 10cm of the infrared sensor (located below the power button on the LED screen). The lid will automatically open.
3. Place Toothbrushes: Insert your toothbrushes into the two designated slots. The holder is compatible with most manual, sonic, and rotary toothbrushes, excluding large and wide brush heads.
4. Iniciar ciclo de limpieza: Wave your hand in front of the sensor again to close the lid. The device will automatically initiate a cleaning and air-drying cycle.

Figure 3: The infrared sensor allows for hands-free opening and closing of the device.

Automatic Cleaning and Drying Cycle

Once the lid is closed, the device performs the following:

• Desinfección: The UV light will activate for 20 seconds to disinfect the toothbrush heads.
• Secado al aire: A fan will operate for 100 seconds to air dry the toothbrushes, preventing moisture buildup.

This cycle will repeat automatically every three hours for 24-hour hygiene. The LED smart screen displays battery status, cleaning progress, air drying status, and cleaning indication.

Figure 4: The device features auto UV cleaning and fresh air ventilation for continuous hygiene.

Cargando

The Bitvae X122 has a built-in 1800mAh battery providing up to 30 days of use on a single charge. To charge:

• Localice el puerto de carga tipo C en el costado del dispositivo.
• Plug in the provided USB cable. You can charge the device while it is still mounted on the wall or remove it.
• Use a 5V-1A adapter (not included) for optimal charging.

6. Mantenimiento

To ensure the longevity and effectiveness of your Bitvae X122 Toothbrush Cleaner & Holder:

• Limpie periódicamente el exterior del dispositivo con un paño suave y húmedo.amp paño.
• Ensure the toothbrush slots are free from toothpaste residue or debris.
• If removed from the wall for cleaning, ensure the wall bracket and device are dry before re-mounting.

7. Solución de problemas

If you encounter issues with your Bitvae X122, please refer to the following common solutions:

• Device Not Turning On/Responding: Ensure the device is sufficiently charged. If the battery is low, connect it to a power source using the provided USB-C cable and a 5V-1A adapter.
• Lid Sensor Not Working: If the motion sensor for opening/closing the lid becomes unresponsive, perform a system restart. Press and hold the area where the motion sensor is located (below the power button on the LED screen) for approximately 3 seconds. This should reactivate the sensor.
• Cleaning/Drying Cycle Issues: Ensure the lid is fully closed after placing toothbrushes. If the issue persists, try restarting the device.

8. Información de seguridad

ADVERTENCIA:

• Mantener alejado de los niños.
• Do not stare directly into the UV light when active.
• No sumerja el dispositivo en agua.
• Utilice únicamente el volumen de carga especificadotage (5V-1A) to avoid damage.

9. Garantía y soporte

Bitvae offers a Free Replacement within 1 Year, Worry-free After-sales policy. If the product is defective or malfunctions, you do not need to return it to the place of purchase. Simply contact our prompt and friendly customer service team. Our team is dedicated to solving any problem to your complete satisfaction.

Información del contacto:

• Correo electrónico: soporte@bitvae.com
• Teléfono: +1-972-679-9068
• Websitio: https://bitvae.com

Bitvae is dedicated to the sustainable practice of saving unnecessary costs. We adhere to the principle of compact design when developing our packaging. By skipping the adapter, we're also helping to reduce your environmental impact. Please use your mobile phone adapter to charge your Bitvae product (output: 5V-1A/2A). If you need a new adapter, please contact us.