PULACO 130W 3700GPH Amphibious Water Pump Instruction Manual

1. Introducción

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your PULACO 130W 3700GPH Amphibious Water Pump. This versatile pump is designed for use in various water environments, including garden ponds, aquariums, and fountains. It features a variable frequency motor for energy efficiency and quiet operation.

Please read this manual thoroughly before using the pump and retain it for future reference.

2. Características del producto

• AmpDiseño hibiscus: Operates both submerged (submersible mode) and externally (ground mode).
• Variable Frequency Motor: Ensures ultra-quiet operation and energy efficiency.
• Construcción duradera: Features an abrasion-resistant ceramic axis and ABS impeller for extended service life.
• Protección térmica: Built-in device to prevent overheating and ensure continuous high-performance operation.
• Rendimiento alto: Maximum flow rate of 3700 Gallons Per Hour (GPH) and a maximum lift of 24 feet.
• Clasificación de impermeabilidad IPX8: Motor is sealed by resin, allowing safe underwater installation.
• Large Strainer: Designed to prevent large debris from entering the pump.

3. Contenido del paquete

Verifique que todos los artículos estén presentes y sin daños al abrir el paquete:

• 1 x PULACO Water Pump with 24.75 ft power cord
• 4 x ventosas
• 1 x 30 mm Nozzle
• 1 x 35 mm Nozzle
• 2 x anillos de sellado
• 2 x Adjustable Fasten Steel Rings
• 2 x 1.5 inch PVC Connectors

Image: Contents of the PULACO Water Pump package, including the pump, power cord, suction cups, various nozzles, sealing rings, and PVC connectors.

4. Instrucciones de seguridad

ADVERTENCIA: No seguir estas instrucciones de seguridad puede provocar descargas eléctricas, incendios o lesiones graves.

• Desconecte siempre la fuente de alimentación antes de realizar cualquier mantenimiento, instalación o limpieza.
• Asegúrese de que la bomba esté correctamente conectada a tierra para evitar riesgos eléctricos.
• Do not operate the pump dry (without water) as this can cause severe damage and void the warranty.
• Regularly inspect the power cord and pump for any signs of damage. Do not use if damaged.
• Keep the pump and power cord out of reach of children and pets.
• Utilice la bomba únicamente para el fin previsto, tal como se describe en este manual.
• Ensure the electrical outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for outdoor or wet applications.
• Do not lift or carry the pump by its power cord.

5. Configuración e instalación

The PULACO water pump can be installed in two modes: Submersible Mode or Ground Mode.

5.1. Componente terminadoview

Image: Diagram illustrating the main components of the pump, including the handle, shaft, water outlet, water inlet, pump body, and detachable filter cover.

5.2. Nozzle and Connector Attachment

Select the appropriate nozzle (30mm or 35mm) or 1.5-inch PVC connector based on your tubing requirements. Ensure sealing rings are properly seated for a watertight connection. Use the adjustable fasten steel rings to secure soft tube connections.

Image: The pump with its dimensions (10 inches long, 4.3 inches wide) and examples of 1.2-inch, 1.4-inch nozzles, and 1.5-inch PVC connectors.

5.3. Adjustable Outlet Direction

The pump's outlet direction can be adjusted to suit your setup, offering flexibility for connection angles (0°, 90°, 180°).

Image: Illustration of the pump's adjustable water outlet, demonstrating how it can be rotated to different angles for convenient connection.

5.4. Installation Modes

Image: Visual guide for installing the pump in Submersible Mode (fully submerged) and Ground Mode (external, with the pump below the water line).

Submersible Mode:

Install the pump completely underwater. The IPX8 submersible design ensures safe operation. Use the suction cups to secure the pump to a clean, flat surface at the bottom of your pond or aquarium.

Ground Mode (External Installation):

For ground mode, install the pump lower than the pool/tank water line to ensure water flows to the inlet automatically. This pump does not have a self-priming function. Seal the 1.5-inch PVC connectors with PTFE tape for a secure, leak-free connection. Install the pump in a cool place to prevent overheating. Do not continuously run the pump for over 24 hours in Ground Mode, especially in high-temperature environments, to ensure normal service life.

6. Instrucciones de funcionamiento

Once installed and connected, the pump operates simply:

1. Ensure all connections are secure and the pump is correctly positioned for your chosen mode (submersible or ground).
2. Plug the power cord into a suitable, grounded electrical outlet. The pump will start working immediately.
3. Para detener la bomba, desconecte el cable de alimentación del tomacorriente.

For optimal performance in Ground Mode, ensure the pump is always below the water level of the source to facilitate water intake.

Imagen: Examples of the PULACO water pump in various applications, including a garden pond with a waterfall, an aquarium, an aquaculture setup, and a small pool.

7. Mantenimiento

Regular cleaning and maintenance are crucial for ensuring the pump's standard performance and extending its lifespan.

1. Desconectar la energía: Desenchufe siempre la bomba de la fuente de alimentación antes de cualquier mantenimiento.
2. Retire la cubierta del filtro: Detach the filter cover from the pump body.
3. Impulsor de acceso: Carefully remove the impeller. Refer to the 'Pump Disassembly Diagram' in Section 5.1 for guidance.
4. Componentes limpios: Use a small brush or a stream of water to remove any accumulated debris, algae, or mineral deposits from the filter cover, impeller, and pump housing.
5. Inspeccionar si hay daños: Check the impeller and ceramic axis for any signs of wear or damage. Replace if necessary.
6. Volver a montar: Reassemble the pump components in reverse order, ensuring all parts are securely fitted.
7. Limpieza regular: Clean the pump regularly, especially if operating in environments with high debris or algae content.

8. Solución de problemas

If you encounter issues with your PULACO water pump, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact PULACO customer support.

9. Especificaciones

10. Garantía y soporte

For warranty information or technical support, please contact PULACO customer service directly. Keep your purchase receipt as proof of purchase.

PULACO Customer Service: Refer to the contact information provided with your product packaging or visit the official PULACO websitio.