1. Introducción
The WANLUTECH MT-6510 is a multi-functional testing device designed for fiber optic, CCTV, and network cable installations and maintenance. It integrates various testing capabilities including Optical Time Domain Reflectometer (OTDR), Optical Power Meter (OPM), Visual Fault Locator (VFL), Light Source (LS), Optical Loss Test (OLS), Event Map, IP Camera Test, HD Coaxial Camera Test, RJ45 Cable TDR Test, PoE, and Network Test Tools. This manual provides detailed instructions for the safe and effective operation of the device.
2. Información de seguridad
- Seguridad láser: Do not look directly into the optical ports (OTDR/LS, VFL) when the device is active. Laser radiation can cause eye damage.
- Seguridad de la batería: Ensure the battery is correctly installed. Remove the insulating paper piece before first use. Use only the provided charger and battery.
- Seguridad eléctrica: Avoid exposing the device to moisture or extreme temperatures. Do not attempt to open or repair the device yourself.
- Manejo General: Handle the device with care to prevent physical damage. Keep the device and accessories out of reach of children.
3. Contenido del paquete
Verifique que todos los artículos estén presentes en el paquete:
- Probador de fibra óptica OTDR WANLUTECH MT-6510
- Rastreador de cables digital
- Bolsa de herramientas
- Informe de prueba de OTDR
- Accessories (power adapter, various cables, optical connectors)
Image 3.1: The MT-6510 tester with its complete set of accessories, including various cables, adapters, and a carrying case.
4. Producto terminadoview y componentes
The MT-6510 features a 5.4-inch IPS touchscreen and various ports for connectivity and testing. Familiarize yourself with the device layout:
Imagen 4.1: Detallada view of the MT-6510 tester's rear and side panels, highlighting ports such as DC power input/output, HDMI input, VGA input, RS485, LAN, PoE, OTDR/LS, VFL, OPM, and audio in/out. The image also shows the protective rubber sleeve and the battery compartment.
- Panel frontal: 5.4-inch IPS touchscreen display, navigation buttons, power button.
- Panel superior OTDR/LS port, VFL port, OPM port.
- Panel trasero: DC 5V/2A power output, LED lamp, LAN2 & PoE & RJ45 TDR port, PSE in, AHD TVI CVI in, DC 12V/3A output, DC 24V/2A output, DC 12V input, HDMI input, Audio in/out, RS485 port, UTP Cable Test/Scan port, VGA input.
5. Configuración
5.1 Preparación inicial de la batería
Before using the tester for the first time, open the battery cover and remove the paper piece isolating the battery. This ensures proper electrical contact and allows the device to power on and charge.
5.2 Encendido / Apagado
Press and hold the power button located on the device to turn it on or off. The device will boot up to the main menu interface.
5.3 Carga del dispositivo
Connect the provided power adapter to the DC 12V input port on the device and plug it into a power outlet. The charging indicator will show the charging status.
6. Instrucciones de funcionamiento
6.1 OTDR Functions
The OTDR function is used for testing fiber optic cables. It offers two primary modes: Quick Setup and Parameters Set.
Image 6.1.1: Screenshots illustrating the 'Quick Setup' mode for rapid configuration of OTDR tests and the 'Parameters Set' mode for advanced, precise adjustments of test parameters.
- Modo de configuración rápida: Allows for rapid configuration of wavelength, distance range, pulse width, and measurement duration. Ideal for quick assessments.
- Modo de configuración de parámetros: Provides advanced control for professional technicians to set wavelength, distance range, pulse width, measurement mode, IOR, non-reflection threshold, end threshold, and other parameters for more accurate curve results.
- Mapa del evento: Visualizes fiber optic link inspection results, showing information like link length, connector types, fusion points, and break points in a graphical format.
Image 6.1.2: The Event Map interface displaying a visual representation of fiber optic link events and the Threshold Setting menu for defining pass/fail criteria for link attenuation and connection points.
- Multi-track Analysis: Display up to four curves simultaneously for comprehensive analysis, aiding in the detection of short-distance nodes with small pulse widths and longer test distances with large pulse widths.
Image 6.1.3: The multi-track analysis screen showing four distinct OTDR curves, allowing for comparative evaluation of fiber performance.
- File Gestión: Save test reports and curves in EXCEL and PDF formats. Manage saved files, including opening, deleting, and copying.
Image 6.1.4: Screenshots demonstrating the generation of test reports and the interface for managing saved OTDR files, including options for file format and naming.
6.2 Optical Test Functions
- Medidor de potencia óptica (OPM): Connect to the OPM port to measure optical power linearly or non-linearly. Supports calibrated wavelengths: 850/1300/1310/1490/1550/1625nm.
Image 6.2.1: The OPM interface showing a power reading in dBm and options to select different calibrated wavelengths for measurement.
- Localizador visual de fallas (VFL): Used to determine fiber continuity and fault location. Features a 650nm wavelength laser with a maximum test range of 8KM.
Image 6.2.2: The VFL screen displaying a laser safety warning and controls for activating the 650nm laser in steady or evasive modes.
- Optical Loss Test (OLS): Measures the insertion loss of optical passive devices. Connect the OTDR/LS port and OPM port with a short fiber optic patch cable, then click "Start Test."
Image 6.2.3: The OLS interface showing the connection diagram for testing optical loss and the display of optical power and relative power measurements.
- Light Source (LS): Connect to the OTDR/LS port. Used for engineering and maintenance of optical communication and CATV fiber. Supports CW/270 Hz/330 Hz/1 kHz/2 kHz modes.
Image 6.2.4: The Light Source interface, showing options to select wavelength (1310nm/1550nm), mode (CW, 270Hz, 330Hz, 1kHz, 2kHz), and adjust power output.
6.3 CCTV Camera Test Functions
- IP Camera Test (IPC Test): Supports testing up to 4K 12MP IP cameras. Provides power information, IP discovery, and various test tools.
Image 6.3.1: The IPC Test screen displaying network information, PoE and DC 12V power details, and options for ONVIF and other test tools.
- IP Discovery & ONVIF: Automatically searches for IP addresses in the network segment and adjusts the tester's local IP. ONVIF allows automatic login, live video display, test report creation, and channel name modification.
Image 6.3.2: The IP Discovery function scanning for devices and the ONVIF interface showing live camera feed and login status.
- HIK / DH Camera Test: Supports batch activation of Hikvision and Dahua cameras, modification of IP addresses, passwords, and other settings.
Image 6.3.3: The HIK/DH Camera Test screen showing a list of detected cameras with options to enable, modify channel, modify network, modify password, and perform factory reset.
- HD Coaxial 4.0 Test: Supports testing up to 8MP AHD/TVI/CVI/CVBS cameras. Features UTC control, OSD menu, screenshot, video recording, and playback.
Image 6.3.4: The HD Coaxial 4.0 Test screen showing resolution comparison table for various camera types and the CVBS & HD Camera interface with UTC control and OSD menu options.
6.4 Cable Test Functions
- Prueba TDR de cable RJ45: Tests the open and short status of network cables and measures cable length up to 600M.
Image 6.4.1: The RJ45 Cable TDR Test screen displaying the status of each wire pair (open/short) and measured cable length, along with a graphical representation of the cable sequence.
- Rastreador de cables: Searches for BNC, network, and telephone cables from cluttered bundles.
- Probador de cable UTP: Tests UTP cable connection status, detecting near-end, mid-end, and far-end fault points of the RJ45 cable plug.
Image 6.4.2: Illustrations of the Cable Tracer in use for identifying cables and the Cable Tester interface showing connection status and fault locations for UTP cables.
- Prueba de longitud del cable: Mide la posición del punto de interrupción (estado de circuito abierto) para cables BNC, RJ45 y RJ11, hasta 3000 metros.
Image 6.4.3: The Cable Length Test screen displaying the measured length and status (open) for each wire in a UTP cable, with options to calibrate and repeat tests.
- Cable Tracer + Electroscope: Quickly detects near-end, mid-end, and fault points of RJ45 cables. Includes non-contact electroscope for safe live wire identification.
Image 6.4.4: Visual representation of the Cable Tracer and Electroscope features, demonstrating cable tracing, result verification, non-contact electroscope for live wire detection, and intelligent identification of neutral and live wires.
6.5 Network Test Tools
The device includes professional network testing tools:
- Silbido
- Escaneo IP
- Servidor DHCP
- PPPOE
- Ruta de seguimiento
- Flash de puerto
- LLDP
- Monitor de enlaces
Image 6.5.1: Screenshots of various network tools available on the MT-6510, including Link Monitor, LLDP, Port Flashing, Ping, IP Scan, DHCP Server, PPPOE, and Trace Route.
6.6 Power Functions
- Salida de alimentación PoE: Supports IEEE802.3af/at, max 48V, power output 25.5W. Note: The network cable connected to the PoE power output port (LAN port) must be a straight-through cable and cannot be short-circuited.
- Administración de energía: Checks real-time voltage, power, and status of power output and input ports.
Image 6.6.1: The PoE Power Output screen showing active PoE status and the Power Management interface displaying input/output power, voltage, and status for various power ports.
- Detección PoE: Mide el volumen de la fuente de alimentación del conmutador PoE o PSEtage and cable connection status.
- 12V Load Detection: Before testing, connect the 12V power adapter to the DC12V/IN connector and the 12V adapter cable to the DC12V/3A/OUT connector. The interface displays real-time voltage, power, and current parameters.
Image 6.6.2: The PoE Detection screen showing the protocol and power input details, and the 12V Load Detection screen displaying a real-time graph of voltage, power, and current.
6.7 Display and Input
- Entrada HDMI: Supports max 4K 30 FPS. The CCTV tester can function as a display for HDMI sources.
- Entrada VGA: Supports max 1280x1024P 60FPS. The CCTV tester can function as a display for VGA sources.
Image 6.7.1: Illustrations showing the MT-6510 connected as a display via HDMI input for DVR/NVR and via VGA input for other video sources.
- Pantalla táctil IPS de 5.4 pulgadas: The device features a high-resolution (1920x1152) touchscreen for intuitive operation.
Image 6.7.2: The device's 5.4-inch IPS touchscreen display and an illustration of its internal components, including a 1.2GHz 4-core CPU, 1GB RAM, and 8GB FLASH (eMMC).
6.8 Software y conectividad
- TesterPlay (Screen Projection): Supports displaying the tester's screen on a PC or mobile phone simultaneously. Install the "TesterPlay" app on Android or use VLC player on PC to receive screen information.
Image 6.8.1: The TesterPlay interface showing a QR code for mobile app download and illustrating simultaneous screen display on the tester, PC, and Android mobile phone.
- Analizador WiFi: Supports analyzing WiFi signal strength, channel level, and creating WiFi hotspots.
- Servidor FTP: Permite copiar y editar files from the SD card without using an SD card reader. Start the FTP service and enter the tester's FTP address in a computer's address bar.
Image 6.8.2: The WiFi Analyzer screen displaying signal strength and channel information, and the FTP Serve screen showing how to access files de una computadora.
7. Mantenimiento
- Limpieza: Use a soft, dry cloth to clean the device's exterior. For the screen, use a screen-specific cleaning solution and cloth. Keep optical ports clean and free of dust.
- Almacenamiento: Guarde el dispositivo en su bolsa protectora de herramientas en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
- Cuidado de la batería: For prolonged storage, ensure the battery is partially charged (around 50%). Recharge periodically if not in use for extended periods to maintain battery health.
- Actualizaciones de software: Verifique el fabricante website for any available software or firmware updates to ensure optimal performance and access to new features.
8. Solución de problemas
- El dispositivo no enciende: Ensure the battery insulating paper is removed and the battery is charged. Connect to the power adapter to check if it powers on.
- Inaccurate OTDR readings: Verify that optical connectors are clean. Check that test parameters (wavelength, IOR, pulse width) are correctly set for the fiber type being tested.
- Camera not detected during IPC Test: Ensure the camera is powered on and correctly connected to the LAN port. Verify network settings (IP address, subnet mask) for compatibility.
- Cable TDR test issues: Ensure the cable is properly connected and not damaged. Check for open or short circuits as indicated by the test results.
- La pantalla táctil no responde: Reinicie el dispositivo. Si el problema persiste, contacte con atención al cliente.
9. Especificaciones
| Característica | Especificación |
|---|---|
| Número de modelo | MT-6510 |
| Longitud de onda del OTDR | 1310 nm/1550 nm |
| Rango dinámico del OTDR | 28dB / 26dB |
| Mostrar | 5.4'' IPS Touch Screen, 1920x1152 Resolution |
| Optical Power Meter (OPM) Calibrated Wavelengths | 850/1300/1310/1490/1550/1625nm |
| Visual Fault Locator (VFL) Wavelength | 650nm, Max Test Range 8KM |
| Light Source (LS) Modes | CW/270 Hz/330 Hz/1 kHz/2 kHz |
| IP Camera Test Support | Max 4K 12MP |
| HD Coaxial Camera Support | Max 8MP AHD/TVI/CVI/CVBS |
| Rango de prueba TDR de cable RJ45 | Max 600M |
| Compatibilidad con PoE | IEEE802.3af/at, Max 48V, 30W Output |
| Entrada HDMI | Max 4K 30 FPS |
| Entrada VGA | Max 1280x1024P 60FPS |
| Potencia de salida | DC24V/2A, DC12V/3A, DC5V/2A |
| Batería | 1 batería de iones de litio (incluida) |
| Dimensiones | 12.6 x 11.42 x 3.54 pulgadas |
| Peso | 4.85 libras |
10. Garantía y soporte
For any questions or technical support, please contact WANLUTECH customer service. You can typically find support options through your purchase platform or the manufacturer's official website. Please refer to your purchase documentation for specific warranty details.
Para contactar con el soporte:
- Encuentra tu pedido en tu cuenta de Amazon, view Detalles del pedido y haga clic en "Obtener asistencia del producto" para enviarnos un mensaje.
- You can find "WANGLU TESTER" on the product detail page, click on it and then message us.
The manufacturer aims to respond to inquiries within 12 hours.
