Sylvania A19 LED Light Bulbs Instruction Manual

1. Introducción

Thank you for choosing Sylvania A19 LED Light Bulbs. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs. Please read these instructions carefully before use and retain them for future reference.

2. Producto terminadoview

This package includes a combination of Sylvania A19 LED light bulbs designed to replace traditional incandescent bulbs. You will find both 40W equivalent (6W, 450 lumens) and 60W equivalent (8.5W, 800 lumens) bulbs, all featuring a soft white (2700K) color temperature and a standard medium (E26) base.

Image 1: Sylvania A19 LED Light Bulbs, showing both 40W and 60W equivalent bulbs in their packaging.

These energy-efficient bulbs offer instant illumination, long lifespan, and are free from UV/IR emissions, mercury, and lead.

3. Información de seguridad

• Riesgo de descarga eléctrica: Siempre apague la energía del artefacto antes de inspeccionar, instalar o quitar la bombilla.
• Uso exclusivo en interiores: These bulbs are designed for indoor use in dry locations. Do not use in wet or damp entornos a menos que el dispositivo esté específicamente clasificado para tales condiciones.
• No apto para accesorios cerrados: Avoid using these bulbs in fully enclosed fixtures, as this can shorten their lifespan due to heat buildup.
• No regulable: These bulbs are non-dimmable. Do not use with dimmer switches, as this may cause damage to the bulb or dimmer.
• Temperatura de funcionamiento: Suitable for operation in temperatures between -20°C and +40°C (-4°F and +104°F).
• Peso: Do not use in fixtures where the bulb's weight might exceed the fixture's capacity.

4. Configuración e instalación

Installation of Sylvania A19 LED light bulbs is straightforward. Follow these steps:

1. Apagar la energía: Localice el interruptor de luz o el disyuntor que controla el artefacto y apague la energía por completo.
2. Quitar la bombilla vieja: Desenrosque con cuidado la bombilla existente de la lámpara. Si ha estado en uso recientemente, déjela enfriar.
3. Insertar nueva bombilla LED: Gently screw the Sylvania A19 LED bulb into the socket until it is snug. Do not overtighten.
4. Restaurar energía: Vuelva a encender la energía en el interruptor o disyuntor.
5. Prueba: Encienda el interruptor de luz para asegurarse de que la bombilla se ilumine correctamente.

Image 2: A set of four Sylvania A19 LED light bulbs, ready for installation.

5. Instrucciones de funcionamiento

Sylvania A19 LED light bulbs operate like traditional bulbs. Once installed, simply use the wall switch or fixture switch to turn the light on or off. These bulbs provide instant full brightness with no warm-up time.

6. Mantenimiento

These LED bulbs require minimal maintenance due to their long lifespan of up to 11,000 hours.

• Limpieza: Para limpiar la bombilla, asegúrese de que esté apagada y fría. Límpiela suavemente con un paño suave y seco. No utilice limpiadores líquidos ni productos abrasivos.
• Reemplazo: When the bulb reaches the end of its life, follow the installation steps in Section 4 to replace it with a new Sylvania A19 LED bulb. Dispose of old bulbs according to local regulations.

7. Solución de problemas

If your Sylvania A19 LED bulb does not light up after installation, consider the following:

• Sin energía: Check if the light switch is in the 'ON' position. Verify that the circuit breaker for the fixture has not tripped.
• Conexión suelta: Turn off the power, then carefully re-screw the bulb into the socket to ensure a secure connection.
• Incorrect Fixture: Ensure the fixture is compatible with A19 bulbs and has a medium (E26) base.
• Regulador de intensidad: Confirm that the fixture is not connected to a dimmer switch, as these non-dimmable bulbs are not compatible.
• Bombilla dañada: If the above steps do not resolve the issue, the bulb may be faulty. Replace it with a new one.

8. Especificaciones

9. Garantía y soporte

For warranty information or technical support, please refer to the packaging or contact LEDVANCE customer service directly. Keep your purchase receipt as proof of purchase.