Introducción
The Ashfly LCD Digital Coin Microscope is a versatile and powerful tool designed for detailed observation and analysis. Featuring a 4.3-inch IPS screen and up to 1000x magnification, it allows users to explore the microscopic world with clarity. It is ideal for inspecting coins, circuit boards, textiles, plants, and jewelry, and can also be connected to a PC for real-time viewing and recording. Its portable design and adjustable LED lighting make it suitable for various applications, from educational purposes to professional inspections.
¿Qué hay en la caja?
- Microscope Device (with 4.3-inch LCD screen)
- Adjustable Stand (Base, Pole, Bracket)
- Cable de carga USB-C
- Manual de instrucciones
Configuración
Follow these steps to assemble your Ashfly Digital Microscope:
- Fije el poste a la base: Insert the metal pole into the designated slot on the plastic base. Ensure it is firmly seated.
- Monte el soporte: Slide the adjustable bracket onto the metal pole. This bracket will hold the microscope unit.
- Conecte la unidad del microscopio: Secure the microscope unit to the bracket. Use the tightening knobs on the bracket to firmly hold the microscope in place.
- Retire la película protectora: Gently peel off the protective plastic film from the LCD screen.

Figure 1: Fully assembled Ashfly Digital Microscope.

Figure 2: Step-by-step assembly guide for the microscope.
Guía de video de configuración
Video: Easy to install motherboard repair magnifier. This video demonstrates the assembly process and initial setup of the microscope, including attaching the unit to the stand and adjusting its position.
Instrucciones de funcionamiento
Operación básica
- Encendido/apagado: Press and hold the power button (usually marked with a circle and vertical line) to turn the device on or off.
- Ajustar la ampliación: Use the zoom in/out buttons (often marked with '+' and '-' or arrows) on the unit to adjust the digital magnification. The optical magnification is fixed at 1000x.
- Ajuste de enfoque: Rotate the focus knob located on the microscope body to achieve a clear image of your specimen. Adjust the height of the microscope on the stand for coarse focus, then use the knob for fine-tuning.
- Luces LED: The microscope features 8 adjustable LED lights. Use the dedicated control (often a dial or button) to adjust the brightness for optimal illumination of your subject.

Figure 3: Adjusting the 8 LED lights for optimal viewEn.

Figure 4: Stepless adjustment of the 8 high-brightness LED ring lights.
Conexión a PC
A view the microscope's feed on your computer:
- Connect the microscope to your PC using the provided USB-C cable.
- On the microscope's screen, select "PC Camera" mode when prompted.
- On your computer, open a camera application (e.g., Windows Camera app or a third-party software like Inskam Camera). The microscope feed should appear.
- You can capture photos and record videos directly from your computer's software.

Figure 5: Real-time zoomed-in view on a PC via USB-C connection.

Figure 6: Microscope connected to a PC, displaying a coin for detailed inspection.
Captura de fotos y vídeos
- The microscope has built-in storage for approximately 100 photos.
- To capture a photo, press the "OK" or "Photo/Video" button on the unit.
- To record video, press the "Photo/Video" button again to switch to video mode, then press "OK" to start/stop recording.
- For extended storage, insert a TF Card (up to 64GB, Class 10 recommended) into the designated slot.

Figure 7: Options for capturing high-definition photos and videos.
Mantenimiento
- Keep the microscope lens clean using a soft, lint-free cloth. Avoid abrasive materials.
- Guarde el dispositivo en un entorno seco y libre de polvo cuando no esté en uso.
- Charge the internal battery using a 5V-1A charger. Do not charge via PC to prevent potential damage.
- Evite exponer el dispositivo a temperaturas extremas o a la luz solar directa.

Figure 8: Charging the microscope for optimal battery life.
Solución de problemas
- No hay imagen en la pantalla: Ensure the device is powered on and fully charged. Check if the lens cap is removed.
- Imagen borrosa: Adjust the focus knob and the height of the microscope on the stand. Ensure adequate lighting from the LED lights.
- Problemas de conexión a PC: Verify the USB-C cable is securely connected. Ensure "PC Camera" mode is selected on the microscope. Try restarting the camera application on your computer.
- Duración corta de la batería: Ensure the device is fully charged before use. Reduce LED brightness if not needed.
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | 366C |
| Tamaño de pantalla | Pantalla IPS HD de 4.3 pulgadas |
| Aumento | Hasta 1000x |
| Resolución | 1080P (for display) |
| Fuente de luz | 8 luces LED ajustables |
| Tipo de batería | Ion de litio (incluido) |
| Tiempo de funcionamiento | Hasta 3.5 horas |
| Tiempo de carga | Aproximadamente 3.0 horas |
| Compatibilidad con PC | MacOS, Windows (Vista, XP, 7, 8, 10, 11) |
| Dimensiones del producto | 5 x 5 x 5 pulgadas |
| Peso del artículo | 1.01 libras |
| Material | Plástico |
| Color | Negro |
Información de seguridad
- No mire directamente las luces LED durante períodos prolongados.
- Mantenga el dispositivo alejado del agua y otros líquidos.
- No intente desmontar ni reparar el dispositivo usted mismo. Póngase en contacto con el servicio de atención al cliente para obtener ayuda.
- Mantener fuera del alcance de los niños pequeños sin la supervisión de un adulto.
Garantía y soporte
For warranty information, technical support, or any inquiries regarding your Ashfly LCD Digital Coin Microscope, please refer to the contact details provided on the product packaging or visit the official Ashfly webSitio web. Conserve su comprobante de compra para reclamaciones de garantía.



