Introducción
This instruction manual provides essential information for the safe and effective assembly, operation, and maintenance of your SONICAKE QDT-30 Hydraulic Height Adjustable Drum Throne. Please read this manual thoroughly before use and retain it for future reference.
Información de seguridad
ADVERTENCIA:
- Always ensure all components are securely fastened before use. Improper assembly can lead to instability and potential injury.
- Do not exceed the maximum weight capacity of 440 lbs (200 kg). Exceeding this limit may cause damage to the product or personal injury.
- Mantenga las manos y los dedos alejados de las piezas móviles durante el ajuste de altura.
- Use the drum throne on a flat, stable surface to prevent tipping.
- Regularly inspect the drum throne for any signs of wear, damage, or loose components. Discontinue use if any issues are found and contact customer support.
Contenido del paquete
Verifique que todos los siguientes componentes estén incluidos en su paquete:
- 1x Seat Cushion (with hydraulic lever attached)
- 1x Respaldo
- 1x Hydraulic Base/Stand Assembly (with legs and anti-slip feet)
- 2x Backrest Attachment Screws
- 2x arandelas
Configuración y montaje
Follow these steps to assemble your drum throne:
- Desempaquetar componentes: Carefully remove all parts from the packaging and place them on a clean, flat surface. Refer to the "Package Contents" section to ensure all parts are present.
- Fije el respaldo al asiento:
- Locate the mounting bracket on the underside of the seat cushion and the corresponding attachment point on the backrest.
- Align the backrest with the bracket.
- Insert the two backrest attachment screws through the washers and then through the bracket holes into the backrest. Tighten securely by hand. Do not overtighten.
Imagen: Primer plano view of the backrest attachment point on the underside of the seat, showing the screws and mechanism for securing the backrest. - Attach Seat Assembly to Hydraulic Base:
- Place the hydraulic base/stand on a stable surface with the legs fully extended.
- Carefully place the assembled seat (with backrest) onto the top of the hydraulic cylinder of the base. Ensure it is seated firmly and centrally.
- Verificar estabilidad: Gently test the stability of the assembled drum throne before sitting on it. Ensure all connections are tight and the base legs are fully spread.
Instrucciones de funcionamiento
Ajuste de altura
The SONICAKE QDT-30 features a hydraulic mechanism for quick and effortless height adjustment.
- Para levantar el asiento: While standing, pull the hydraulic lever located under the seat upwards. The seat will automatically rise. Release the lever when the desired height is reached.
- Para bajar el asiento: While seated, pull the hydraulic lever upwards. The seat will lower under your body weight. Release the lever when the desired height is reached.
The adjustable height range is approximately 45 cm (17.7 inches) to 60 cm (23.6 inches).
Ajuste del respaldo
The backrest can be adjusted for optimal ergonomic support.
- To Adjust Backrest Position: Loosen the backrest attachment screws located on the underside of the seat. Adjust the backrest forwards or backwards to your preferred position. Once adjusted, securely tighten the screws to lock the backrest in place.
- The backrest is designed to conform to the natural curvature of the human body, providing excellent lumbar support.
Mantenimiento
- Limpieza: Wipe the leather fabric seat and backrest with a soft, damp Paño. Para manchas difíciles, use una solución jabonosa suave y seque bien. Evite productos químicos agresivos o limpiadores abrasivos.
- Comprobación del hardware: Periodically check all screws and bolts, especially those securing the backrest and the seat to the base, to ensure they remain tight. Tighten if necessary.
- Sistema hidráulico: The hydraulic system is generally maintenance-free. If you notice any issues with height adjustment, ensure the lever is functioning correctly and there are no obstructions.
- Pies antideslizantes: Ensure the anti-slip rubber pads on the base legs are clean and free from debris to maintain optimal grip.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Seat does not raise or lower smoothly. | Hydraulic lever stuck or obstructed; hydraulic cylinder issue. | Check if the hydraulic lever moves freely. Ensure no obstructions are preventing movement. If the issue persists, contact customer support. |
| Drum throne feels unstable or wobbly. | Loose assembly screws; uneven surface; damaged base. | Ensure all assembly screws (especially backrest and seat-to-base connections) are securely tightened. Verify the drum throne is on a flat, level surface. Inspect the base legs for any damage. |
| Backrest moves or feels loose. | Los tornillos de fijación del respaldo están sueltos. | Tighten the backrest attachment screws firmly. |
Especificaciones del producto
- Modelo: QDT-30
- Marca: sónico
- Color: Negro
- Rango de altura ajustable: 45 cm - 60 cm (17.7 pulgadas - 23.6 pulgadas)
- Dimensiones del producto: 40 cm (D) x 47 cm (W) x 29 cm (H) (seat dimensions)
- Capacidad de peso: Hasta 200 kg (440 lbs)
- Materiales: Leather fabric (seat/backrest), Stainless Steel (frame/base)
- Peso del artículo: 7.7 kilogramos
Información de garantía
Specific warranty details may vary by region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed information regarding warranty coverage and terms.
Atención al cliente
If you have any questions, require assistance with assembly, or encounter any issues not covered in this manual, please contact SONICAKE customer support or your authorized retailer. Please have your model number (QDT-30) and purchase information ready when contacting support.
For more information about SONICAKE products, visit the official SONICAKE websitio.
