1. Introducción
Thank you for choosing the BTF-LIGHTING SP530E LED Controller with RB3 Remote Kit. This device offers versatile control over various LED light strips, integrating WiFi, Bluetooth, and 2.4GHz RF technologies. It supports smart home platforms like Alexa and Google Home, providing a comprehensive lighting control solution for your environment. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.
2. Información de seguridad
- Asegúrese de que la fuente de alimentación voltage matches the requirements of the LED strip (DC5V-24V).
- No exponga el controlador a la humedad ni a temperaturas extremas.
- Desconecte la alimentación antes de realizar cualquier conexión de cableado para evitar descargas eléctricas.
- Este dispositivo está diseñado únicamente para uso en interiores.
- Mantener fuera del alcance de los niños.
3. Contenido del paquete
The BTF-LIGHTING SP530E+RB3 Kit includes the following items:
- 1x SP530E LED Controller
- 1x RB3 RF Remote Control
4. Características del producto
- All-in-One LED Controller: Compatible with various LED strip types including PWM 3CH RGB, 4CH RGBW (without IC), and SPI RGB/RGBW (with Addressable IC Chip). Supports up to 1,200 ICs for SPI RGB LED strips and 900 ICs for SPI RGBW LED strips.
- Control de voz de terceros: Seamlessly integrates with smart speaker platforms such as Amazon Alexa and Google Home for voice commands to control light switches, brightness, and color.
- Control de 4 zonas: The RB3 RF remote allows control of up to 4 distinct lighting zones. Supports one-to-many control (one remote controls multiple controllers) and multi-to-one control (each controller can bind up to 5 RF remotes).
- Calibración de color: Feature to calibrate colors if the app display is inconsistent with the LED strip's output.
- Función de temporización: Set up to 5 timers for automated lighting schedules.
- Función de memoria: Retains settings in case of power loss. Supports Power On/Off Effect Setting, Fun Switch Setting, and Default Switching State Setting.
- 2.4GHz Wireless Remote Control: Offers a control distance of up to 30 meters (98 feet) in open spaces.
- LED Matrix Spectrum Effect: Configure rectangular LED Matrix size and alignment, and set music spectrum parameters like color, saturation, and direction for unique music synchronization.
Imagen: Más alláview of control methods including app, RB3 remote, and third-party voice control (Alexa, Google Home).
Image: Key features of the RGB/RGBW RF Wireless Controller, including PWM/SPI support, Bluetooth, music effects, color calibration, and app/RF/Alexa control.
5. Configuración
5.1. Cableado del controlador LED
The SP530E controller supports various LED strip types. Ensure correct wiring based on your LED strip's specifications (SPI with IC or PWM without IC, and RGB/RGBW configuration). The input voltage (DC5V-24V) depends on your LED strip.
5.1.1. SPI RGB LED Strip Wiring (e.g., WS2812B, WS2811, WS2815)
Image: Wiring diagram for an SPI RGB LED Strip (e.g., WS2812B). Connect VCC, DAT, and GND from the controller to the corresponding pins on the LED strip.
Image: Wiring diagram for an SPI RGB LED Strip (e.g., WS2815). Connect VCC, BI, DI, and GND from the controller to the corresponding pins on the LED strip.
5.1.2. SPI RGBW LED Strip Wiring (e.g., SK6812RGBW, WS2814RGBW)
Image: Wiring diagram for an SPI RGBW LED Strip (e.g., SK6812RGBW, WS2814RGBW). Connect VCC, DAT, and GND from the controller to the corresponding pins on the LED strip.
5.1.3. PWM RGB LED Strip Wiring (e.g., 5050 RGB, FCOB RGB)
Image: Wiring diagram for a PWM RGB LED Strip (e.g., 5050 RGB, FCOB RGB). Connect VCC, R, G, B, and GND from the controller to the corresponding pins on the LED strip.
5.1.4. PWM RGBW LED Strip Wiring (e.g., 5050 RGBW, FCOB RGBW)
Image: Wiring diagram for a PWM RGBW LED Strip (e.g., 5050 RGBW, FCOB RGBW). Connect VCC, R, G, B, W, and GND from the controller to the corresponding pins on the LED strip.
5.2. Instalación y conexión de la aplicación
Download the BanlanX app from your smartphone's app store. Follow the in-app instructions to connect the SP530E controller via WiFi or Bluetooth.
5.2.1. Setting LED Type in App
After connecting, it is crucial to set the correct LED type in the app to ensure proper functionality and color accuracy.
- Enter the parameter setting interface in the app.
- Select 'Modify Light Type' and choose the appropriate LED type (e.g., SPI RGB, PWM RGBW).
- Follow the prompts to complete color correction if needed.
Image: App interface showing steps to set the LED type for SPI RGB LED strips and perform color correction.
Image: App interface showing steps to set the LED type for SPI RGBW LED strips and perform color correction.
Image: App interface showing steps to set the LED type for PWM RGB LED strips and perform color correction.
Image: App interface showing steps to set the LED type for PWM RGBW LED strips and perform color correction.
5.3. Pairing the RB3 RF Remote Control
The RB3 remote can control up to 4 zones. Follow these steps to pair the remote with your SP530E controller(s).
5.3.1. Vinculación del control remoto
- Power on the controller. Within 20 seconds, long press the ON button on the RB3 remote. The LED strip will flash to indicate successful binding.
5.3.2. Unbinding the Remote Control
- Power on the controller. Within 20 seconds, first turn off the lights completely using the remote, then long press the APAGADO botón para borrar todos los controles remotos vinculados.
5.3.3. Zone Setting
The RB3 remote allows you to assign controllers to specific zones (1-4).
- Prensa breve: Select a specific zone (1, 2, 3, or 4). Short press the zone number, then press the ON button. Only that zone will respond.
- Pulsación larga: To set a controller to a specific zone, power on the controller. Within 20 seconds, long press the desired zone key (1, 2, 3, or 4).
Image: Illustration of short press and long press functions for zone setting on the RB3 remote control.
5.3.4. Group Setting and Control
The RB3 remote supports controlling multiple controllers in groups, with each group controlling an LED strip within 30m (98ft). There is no limit to the number of controllers in a group.
Image: Diagram showing how multiple SP530E controllers can be grouped and controlled by a single RB3 RF remote.
Image: Illustration of the RB3 remote controlling four separate zones within a home environment.
Image: Depiction of multiple RB3 remotes controlling a single lighting zone, demonstrating multi-to-one control capability.
6. Instrucciones de funcionamiento
6.1. App Control (BanlanX App)
The BanlanX app provides comprehensive control over your SP530E controller. The app features Dynamic, Static, Music, and DIY modes, along with various settings.
Imagen: Más alláview of the BanlanX app interface, showing Dynamic, Static, Music, DIY modes, and the Settings menu.
6.1.1. Music Effects
The app supports both multi-segment LED strip music effects and matrix LED music spectrum effects.
- Multi-segment LED Strip Music Effects: Configure segments and pixels of light strips. Each segment can have a different music effect with four audio ranges (low, middle, high, full frequency).
- Matrix LED Music Spectrum Effects: Flexibly configure the size and alignment of the rectangular LED Matrix. Adjust parameters like color, saturation, and direction for sound column effects.
Image: App screenshots demonstrating multi-segment LED strip music effects and matrix LED music spectrum effects.
6.2. RB3 RF Remote Control Functions
The RB3 remote provides quick access to essential lighting controls.
- Botón de encendido: Short press to turn on the light. Long press (within 20s of power-on) to bind/unbind the remote control.
- Botón APAGADO: Short press to turn off the light. Long press (within 20s of power-on, after turning off lights) to clear all bound remote controls.
- Botón TODOS: Short press to select all zones. Long press (within 20s of power-on) to unset the zones.
- Rueda de color: Touch to select desired color.
- Brightness/Speed Control: Adjust brightness or effect speed.
- Zone Selection (1-4): Select individual zones for control.
Image: Detailed functions of the RB3 RF remote control, including ON/OFF, ALL, and zone selection.
6.3. Control por voz (Alexa y Google Home)
The SP530E controller supports third-party voice control without needing a 2.4GHz gateway.
Image: Demonstrates smartphone app control and compatibility with Amazon Alexa and Google Assistant for voice commands.
6.3.1. Conexión a Alexa
- Open the BanlanX app and navigate to the 'Me' section.
- Select 'Third-Party Voice Services'.
- Choose 'Amazon Alexa'.
- Click 'Quick Link' to proceed.
- In the Alexa App, search for 'BanlanX' in the Skills & Games section. Ensure you select the correct skill.
- Enable the skill and log in to your BanlanX account to link.
Image: Step-by-step guide within the BanlanX app to connect the SP530E controller to Amazon Alexa.
Image: Instructions for finding and enabling the BanlanX skill within the Amazon Alexa application.
6.4. Vídeo oficial del producto
Vídeo: Un producto oficial terminadoview of the SP530E BT WiFi Controller by BTF-Lighting, demonstrating its features and capabilities.
7. Mantenimiento
- Mantenga el controlador limpio y sin polvo. Utilice un paño suave y seco para limpiarlo.
- Evite exponer el dispositivo a la luz solar directa o fuentes de calor.
- Revise periódicamente las conexiones del cableado para asegurarse de que sean seguras.
8. Solución de problemas
- Las luces no se encienden: Check power connections to the controller and LED strip. Ensure the power supply is adequate for the LED strip.
- El control remoto no responde: Check if the remote is paired correctly (refer to Section 5.3). Ensure the remote's battery is not depleted.
- Problemas de conexión de la aplicación: Verify your WiFi network is 2.4GHz. Restart the controller and your smartphone. Ensure the BanlanX app is updated to the latest version.
- Colores incorrectos: Perform color calibration through the BanlanX app (refer to Section 5.2.1). Ensure the correct LED type is selected in the app settings.
- Delay in power-on with wall switch: If connected to a standard wall switch, there might be a 15-second delay for WiFi connection before lights turn on. This is normal behavior for WiFi-enabled controllers.
9. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | BTF-ILUMINACIÓN |
| Modelo | SP530E+RB3 Kit |
| Método de control | WiFi (2.4GHz), Bluetooth, 2.4GHz RF Remote, Voice (Alexa, Google Home) |
| Vol de entradatage | DC5V-24V |
| Max Control (SPI RGB) | 1,200 circuitos integrados |
| Max Control (SPI RGBW) | 900 circuitos integrados |
| Distancia del control remoto | 30m (98ft) in open space |
| Uso en interiores y exteriores | Uso en interiores únicamente |
| Material | Plástico |
| Peso del artículo | 0.13 kilogramos (4.6 onzas) |
| Vida media | 50000 horas |
Image: EU Energy Label for FCOB RGB LED Strip. For more details, visit https://eprel.ec.europa.eu/qr/1411725.
10. Garantía y soporte
Specific warranty information is not provided in the product details. For warranty claims, technical support, or further assistance, please contact BTF-LIGHTING customer service through the retailer where the product was purchased or visit the official BTF-LIGHTING websitio.
