Manual del usuario de la cortadora de césped Troy-Bilt TB30E XP

Información importante de seguridad

Read and understand all instructions before operating the mower. Failure to follow these instructions could result in serious injury or property damage.

• Utilice siempre el equipo de seguridad adecuado, que incluya protección para los ojos y calzado resistente.
• Mantenga a los niños y a las mascotas alejados del área de operación.
• Never operate the mower under the influence of drugs or alcohol.
• Inspect the area for debris (rocks, sticks, etc.) before mowing.
• Disconnect power and remove the key before performing any maintenance or clearing obstructions.

Producto terminadoview

The Troy-Bilt TB30E XP is a 56V MAX Lithium-Ion battery-powered compact riding mower designed for efficient and quiet lawn care. It features a 30-inch cutting deck and is capable of mowing up to 1 acre or running for up to 1 hour on a single charge.

Figura 1: Delantero izquierdo view of the Troy-Bilt TB30E XP riding mower, showcasing su diseño compacto y su combinación de colores rojo y negro.

Figura 2: Frente view of the Troy-Bilt TB30E XP riding mower, highlighting the steering wheel and front bumper.

Configuración y carga inicial

1. Desembalaje: Carefully remove the mower and all components from the packaging. Inspect for any shipping damage.
2. Asamblea: Follow the quick assembly guide for attaching the steering wheel and seat, if not pre-assembled. Ensure all fasteners are securely tightened before operation.
3. Carga de la batería:

   The mower is powered by a 56V MAX Lithium-Ion battery. Before first use, fully charge the battery to ensure optimal performance and runtime.

   

   Figura 3: De cerca view of the charging port cover on the Troy-Bilt TB30E XP, located on the side of the mower.

   

   Figura 4: The charging port of the Troy-Bilt TB30E XP with the cover open, showing the multi-pin connector.

   • Locate the charging port, typically found on the side or rear of the mower.
   • Connect the charger to the mower's charging port.
   • Enchufe el cargador en una toma de corriente estándar.
   • Allow the battery to charge until the indicator lights show a full charge. This may take several hours for the initial charge.
4. Comprobación previa a la operación: Before each use, ensure tires are properly inflated, cutting blades are sharp and securely attached, and all safety features (e.g., seat switch, parking brake) are functional.

Instrucciones de funcionamiento

1. Arrancar el cortacésped:
   • Asegúrese de que el freno de mano esté puesto.
   • Sit firmly in the operator's seat.
   • Insert the key (if applicable) and turn it to the "ON" position.
   • Engage the blade lever to start the cutting deck.
2. Ajuste de la altura de corte:

   The mower features multiple cutting height positions to suit various grass types and desired lengths.

   

   Figura 5: Close-up of the cutting height adjustment lever on the Troy-Bilt TB30E XP, showing numbered settings from 1 to 5.

   • Use the cutting height adjustment lever to select the desired grass length.
   • Adjust the height before starting to mow.
3. Driving and Mowing:
   • Suelte el freno de estacionamiento.
   • Use the foot pedals to control forward and reverse motion.
   • Dirige utilizando el volante.
   • Mow at a safe and steady pace. Avoid sudden turns or stops, especially on slopes.
   • The electric brushless motor ensures quiet operation, allowing for a more pleasant mowing experience.
4. Cómo detener la cortadora de césped:
   • Disengage the blade lever.
   • Aplique el freno de mano.
   • Turn the key to the "OFF" position and remove it for safety.

Mantenimiento

Regular maintenance ensures the longevity and optimal performance of your Troy-Bilt TB30E XP riding mower. Always disconnect power and remove the key before performing any maintenance.

Después de cada uso:

• Limpieza: Clean the cutting deck and exterior of the mower to remove grass clippings and debris. Use a damp cloth; avoid high-pressure water directly on electrical components.
• Inspección de la hoja: Check the cutting blades for sharpness and damage. Sharpen or replace as needed.
• Carga de la batería: Recharge the battery after each use to ensure it's ready for the next mowing session.

Mantenimiento estacional:

• Cuidado de la batería: For long-term storage, ensure the battery is fully charged and stored in a cool, dry place. Recharge periodically during the off-season to maintain battery health.
• Inspección general: Check all nuts, bolts, and fasteners for tightness. Lubricate moving parts as recommended in the full manual.

Solución de problemas

Presupuesto

• Modelo: TB30E XP (33AA27JDB66)
• Fuente de energía: 56V MAX Lithium-Ion Battery (30 Ah)
• Tamaño de la plataforma: 30 pulgadas
• Duración: Up to 1 hour or 1 acre per charge
• Tipo de motor: Eléctrico sin escobillas
• Fabricante: Troy-Bilt
• ASIN: B0D53451BL
• Primero disponible: 1 de mayo de 2024

Información de garantía

The Troy-Bilt TB30E XP riding mower and its battery are covered by a Garantía limitada de 3 añosEsta garantía cubre defectos de material y mano de obra en condiciones normales de uso.

Please refer to the official warranty document included with your product for full terms and conditions, including coverage details, limitations, and the process for making a warranty claim.

Atención al cliente

For technical assistance, replacement parts, or warranty claims, please contact Troy-Bilt customer support.

Websitio: Visit the official Troy-Bilt website for comprehensive FAQs, product registration, and support resources. www.troybilt.com

Teléfono: Refer to your product packaging or the Troy-Bilt webSitio para obtener los números de contacto de servicio al cliente más actualizados.

When contacting support, please have your model number (TB30E XP) and ASIN (B0D53451BL) ready to expedite service.