Información importante de seguridad
Lea atentamente todas las instrucciones antes de ensamblar y usar. Conserve este manual para futuras consultas.
WARNING: This product can expose you to chemical Di(2-ethylhexyl)phthalate (DEHP) and Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.
Contenido del paquete
Ensure all components are present before beginning assembly. Refer to the diagram below for identification.
Image: All chair components laid out for inspection.
- Respaldo (A)
- Asiento (B)
- Armrests (C)
- Gas Lift (D)
- Base (E)
- Casters (F)
- Herrajes (tornillos, arandelas, llave Allen)
Instrucciones de montaje
Follow these steps to assemble your Yaheetech office chair. An assembly video is provided for visual guidance.
Video: Official Yaheetech assembly guide for the Mid Back Faux Leather Office Chair.
Paso 1: Coloque las ruedas en la base
Inserte las cinco ruedas (F) en los orificios de cada pata de la base de la silla (E). Presione firmemente hasta que encajen en su lugar.
Image: Assembly diagram illustrating caster attachment.
Step 2: Insert Gas Lift
Place the gas lift (D) into the center hole of the assembled base. Important: Remove the black plastic cap from the top of the gas lift before insertion.
Image: Removing the black plastic cap from the gas lift.
Step 3: Attach Armrests to Seat
Align the armrests (C) with the pre-drilled holes on the underside of the seat (B). Secure them using the provided screws and the Allen wrench. Ensure they are tightened securely.
Paso 4: Fijar el mecanismo al asiento
Position the chair mechanism (part of the hardware kit) onto the underside of the seat, aligning the holes. Secure it with the appropriate screws using the Allen wrench. Ensure the 'FRONT' label on the mechanism faces the front of the seat.
Paso 5: Fije el respaldo al asiento
Connect the backrest (A) to the seat assembly. Align the metal brackets of the backrest with the corresponding holes on the seat's underside and secure with screws.
Paso 6: Conecte el conjunto del asiento al elevador de gas
Carefully place the assembled seat onto the gas lift, ensuring the center hole of the mechanism aligns with the top of the gas lift. Press down firmly to secure.
Operación de su silla
Su silla de oficina Yaheetech ofrece varias funciones ajustables para una comodidad personalizada.
Ajuste de la altura del asiento
Para ajustar la altura del asiento, tire de la palanca ubicada a la derecha hacia arriba. Sentado, levante la palanca para bajar el asiento. Para subirlo, levante la palanca de pie o con el mínimo peso sobre el asiento.
Tilting and Rocking Function
The chair features a tilt mechanism for a comfortable rocking/reclining option. Pull the lever outwards to activate the rocking motion. Push the lever inwards to lock the chair in an upright position. The tilt tension can be adjusted by turning the round knob located underneath the seat.
Image: Rocking function and tilt tension adjustment.
Giro de 360 grados
The chair's seat can swivel 360 degrees, providing essential mobility and ease of access to your workspace.
Detachable Armrests
The armrests are designed to be detachable. You can choose to use the chair with or without armrests based on your preference and space requirements. Removing them allows for a more relaxed sitting posture or to push the chair further under a desk.
Image: Chair shown with and without armrests.
Cuidado y mantenimiento
El cuidado adecuado prolongará la vida y la apariencia de su silla.
- Limpieza: The supple PU leather is water-resistant. Wipe clean with a damp Paño y jabón suave. Evite productos químicos agresivos o limpiadores abrasivos.
- Inspección: Revise periódicamente todos los tornillos y pernos para asegurarse de que estén bien apretados. Vuelva a apretarlos si es necesario.
- Movimiento: Ensure casters are free of debris for smooth rolling.
Image: Features of the premium PU leather and high-density foam.
Solución de problemas
- La silla no se ajusta en altura: Ensure the black plastic cap has been removed from the gas lift. Check if the gas lift lever is fully engaged.
- Chair not tilting/rocking: Ensure the tilt lever is pulled outwards to enable the rocking function. Adjust the tilt tension knob if the chair feels too stiff or too loose.
- Las ruedas no giran suavemente: Check casters for any trapped hair or debris and clean them. Ensure casters are fully inserted into the base.
- La silla se siente inestable: Verify that all screws are securely tightened, especially those connecting the seat, backrest, and armrests.
Especificaciones del producto
| Característica | Especificación |
|---|---|
| Marca | Yaheetech |
| Nombre del modelo | Chair (YT-001376267) |
| Color | Blanco |
| Material | Cuero sintético, espuma |
| Dimensiones del producto | 24.4" de profundidad x 25.4" de ancho x 37" de alto |
| Tamaño | 25.4″ W × 24.4″ D × (33-37)″ H |
| Recomendación de peso máximo | 300 libras |
| Características especiales | Adjustable Height, Arm Rest, Ergonomic, Upholstered Leather, Tilting |
| Movimiento de la base del mueble | Girar |
| Peso del artículo | 22.4 libras |
Imagen: Dimensiones detalladas del producto.
Garantía y atención al cliente
Para obtener información sobre la garantía o asistencia al cliente, consulte la documentación incluida con su compra o comuníquese directamente con Yaheetech a través de su sitio web oficial. webSitio web o canales de atención al cliente. Conserve su recibo de compra para cualquier reclamación de garantía.
