Manual de instrucciones del exprimidor de prensado en frío LINKChef SJ52

Introducción

Thank you for choosing the LINKChef SJ52 Cold Press Juicer. This appliance is designed to efficiently extract juice from a variety of fruits and vegetables, preserving nutrients and flavor through its slow masticating technology. Please read this manual thoroughly before operating the juicer to ensure safe and optimal performance. Keep this manual for future reference.

LINKChef SJ52 Cold Press Juicer with various juices and ingredients, showcasing its sleek design and the fresh output.

Instrucciones de seguridad importantes

Al utilizar aparatos eléctricos, siempre se deben seguir precauciones básicas de seguridad para reducir el riesgo de incendio, descarga eléctrica y/o lesiones a las personas, incluidas las siguientes:

• Lea todas las instrucciones antes de utilizar el aparato.
• No sumerja la base del motor en agua u otros líquidos.
• Asegúrese de que el aparato esté desenchufado antes de ensamblarlo, desmontarlo o limpiarlo.
• Mantenga las manos y los utensilios alejados del conducto de alimentación durante el funcionamiento para evitar lesiones. Utilice el empujador de alimentos incluido.
• The juicer is equipped with an automatic safety sensor that stops operation when the lid is opened. Do not attempt to bypass this safety feature.
• No utilice el aparato con un cable o enchufe dañado.
• Este aparato no está diseñado para ser utilizado por niños. Se requiere una supervisión estricta cuando se utilice cerca de ellos.
• No utilice el aparato para ningún otro fin que no sea el previsto.

The automatic safety sensor ensures the juicer stops operating if the lid is opened, enhancing user safety.

Componentes del producto

Familiarize yourself with the parts of your LINKChef SJ52 Cold Press Juicer:

• Base del motor
• Tazón de jugo
• Barrena (tornillo masticador)
• 3-Layer Stainless Steel Filter
• Feed Chute Lid with 130mm Wide Opening
• Contenedor de pulpa
• Juice Container (1.8L capacity)
• Cepillo de limpieza
• Empujador de alimentos

Illustration of the main components of the LINKChef SJ52 Juicer.

Configuración y montaje

Assembling your LINKChef SJ52 Juicer is quick and straightforward:

1. Place the juicing bowl onto the motor base, ensuring it is securely seated.
2. Inserte la barrena en el centro del recipiente para exprimir.
3. Place the 3-layer stainless steel filter over the auger.
4. Attach the feed chute lid. Ensure the lid is open during assembly. Rotate the lid clockwise until the arrow on the lid aligns with the lock icon on the juicing bowl. You will hear a click when it is securely locked.
5. Position the juice container under the juice spout and the pulp container under the pulp spout.

Step-by-step guide illustrating the easy assembly of the LINKChef SJ52 Juicer.

Important assembly tips: keep the lid open during assembly and rotate clockwise to align the lock symbols.

Instrucciones de funcionamiento

Follow these steps for efficient juicing:

1. Prepare your ingredients: Wash fruits and vegetables thoroughly. For most items, pre-cutting is not necessary due to the 130mm wide feed chute. For fibrous vegetables like celery, cutting into smaller pieces (approx. 1-2 inches) is recommended to optimize juice extraction and prevent clogging.
2. Asegúrese de que el exprimidor esté correctamente ensamblado y que los contenedores de jugo y pulpa estén en su lugar.
3. Enchufe el aparato.
4. Turn the control knob to the 'ON' position to start the juicer. The cold press technology operates at 50-60 RPM to minimize oxidation and maximize nutrient retention.
5. Gradually feed ingredients into the wide feed chute. Use the food pusher only if necessary to guide ingredients. Avoid forcing ingredients.
6. Una vez finalizado el proceso de extracción, gire la perilla de control a la posición “OFF” y desenchufe el aparato.
7. If clogging occurs during operation, turn the knob to the 'REV' (Reverse) position for a few seconds to clear the blockage, then return to 'ON' to continue juicing.

The wide feed chute allows for adding large or whole pieces of fruit or vegetables, saving preparation time.

The single control knob provides simple operation to start, stop, and reverse the juicer.

The LINKChef SJ52 Juicer is versatile, capable of making family-sized juice, velvety frozen fruit sorbet, and creamy, unfiltered nut milk.

Mantenimiento y limpieza

La limpieza regular garantiza la longevidad y la higiene de su exprimidor:

1. Desenchufe el exprimidor del tomacorriente.
2. Disassemble the juicer by rotating the feed chute lid counter-clockwise and removing all detachable parts.
3. Rinse all detachable parts (juicing bowl, auger, filter, lid, containers) under running water immediately after use.
4. Use the provided cleaning brush to remove any pulp residue from the filter and other components. Pay special attention to the fine mesh of the filter.
5. The detachable parts are dishwasher safe (low temperature recommended).
6. Limpie la base del motor con un anuncioamp paño. Nunca sumerja la base del motor en agua.
7. Asegúrese de que todas las piezas estén completamente secas antes de volver a montarlas o guardarlas.

The juicer's components are designed for easy cleaning, including the filter which can be rinsed under water with the provided brush.

For thorough cleaning, remember to remove the silicone pad before washing.

Solución de problemas

Si tiene problemas con su exprimidor, consulte los siguientes problemas y soluciones comunes:

Si el problema persiste después de intentar estas soluciones, comuníquese con el servicio de atención al cliente.

Presupuesto

Garantía y soporte

For warranty information, product support, or any inquiries not covered in this manual, please refer to the warranty card included with your purchase or contact LINKChef customer service. Our support team is available to assist you with any questions or concerns regarding your SJ52 Cold Press Juicer.