1. Producto terminadoview
The Puig 21937N License Plate Holder is an aftermarket accessory designed to replace the original license plate support on specific BMW motorcycle models. This holder is engineered to offer a significant weight reduction compared to the original component, achieved through a combination of steel parts with an epoxy finish and polyamide elements.
Características principales:
- Construcción ligera: Combines epoxy-finished steel and polyamide parts for reduced weight.
- Diseño ajustable: Some versions of the support may be fixed or adjustable, depending on the specific motorcycle model.
- Turn Signal Provision: Includes space for aftermarket turn signals. Note: Original turn signals are not compatible.
- Longitud ajustable: The support is adjustable up to 3 cm in length.
- Motorcycle Specific Fit: Designed for specific vehicle fitment.
Compatibilidad:
This license plate holder is compatible with the following BMW motorcycle models:
- BMW R1300GS (2023, 2024)
- BMW R1300GS TRIPLE BLACK (2023, 2024)
- BMW R1300GS TROPHY (2023, 2024)
Always verify compatibility with your specific motorcycle model before installation.
2. Components and Design
The Puig 21937N License Plate Holder is constructed from high-quality materials to ensure durability and a precise fit. It features a sleek black finish, integrating seamlessly with the motorcycle's aesthetics.
Figura 1: Frente view of the Puig 21937N License Plate Holder. This image shows the overall design and the black finish of the product.
The design incorporates mounting points for the license plate and dedicated spaces for aftermarket turn signals. The adjustable nature of the support allows for customization of the license plate's position.
3. Instalación (Configuración)
Installation of the Puig 21937N License Plate Holder requires basic mechanical knowledge and tools. It is recommended that installation be performed by a qualified technician if you are not confident in your abilities.
Consideraciones importantes antes de la instalación:
- Señales de giro: This product does not include turn signals. Aftermarket turn signals must be purchased separately, as the original turn signals are not compatible with this holder.
- Ajustabilidad: Familiarize yourself with the adjustment mechanism (if applicable to your specific model) before final tightening. The support can be adjusted up to 3 cm.
- Herramientas: Ensure you have the necessary tools for removing the original license plate holder and installing the new Puig unit.
While specific step-by-step instructions are not provided in this manual, the general process involves removing the OEM license plate holder and mounting the Puig 21937N in its place, securing all fasteners according to manufacturer torque specifications. Ensure all connections for aftermarket turn signals are properly made and secured.
4. Operación
The Puig 21937N License Plate Holder functions as a secure and aesthetically enhanced mounting point for your motorcycle's license plate and aftermarket turn signals. Once installed, no further operational steps are required beyond ensuring the license plate and turn signals are securely attached and visible according to local regulations.
5. Mantenimiento
To ensure the longevity and appearance of your Puig 21937N License Plate Holder, follow these simple maintenance guidelines:
- Limpieza: Clean the holder regularly with a mild soap solution and a soft cloth. Avoid abrasive cleaners or solvents that could damage the epoxy finish or polyamide components.
- Inspección: Periodically check all mounting bolts and fasteners to ensure they remain tight. Vibrations from riding can sometimes loosen components over time.
- Verificación de daños: Inspect the holder for any signs of damage, cracks, or corrosion, especially after impacts or prolonged exposure to harsh weather conditions.
6. Solución de problemas
Most issues related to the license plate holder are typically installation-related or compatibility concerns.
Problemas comunes y soluciones:
- Holder Does Not Fit:
Ensure your motorcycle model and year are listed in the compatibility section (Section 1). Double-check the product model number (21937N) against your purchase. Incorrect fitment is usually due to an incompatible motorcycle model.
- Turn Signals Do Not Fit:
The Puig 21937N is designed for aftermarket turn signals. Original (OEM) turn signals are not compatible. Ensure you have purchased appropriate aftermarket signals.
- License Plate Not Secure:
Ensure all fasteners securing the license plate to the holder are tightened correctly. If the holder itself feels loose, re-check all mounting bolts to the motorcycle frame.
Si encuentra problemas que no se tratan aquí, consulte la sección de Garantía y soporte para obtener información de contacto.
7. Especificaciones
| Propiedad | Valor |
|---|---|
| Marca | Puig |
| Número de modelo | 21937 N |
| Peso del artículo | 2.5 kilogramos |
| Dimensiones del paquete | 33.5 x 20.8 x 11.3 cm |
| Color | Negro |
| País natal | España |
| Tipo de servicio del vehículo | Motorrad (Motorcycle) |
| Tipo de ajuste | Ajuste específico del vehículo |
8. Garantía y soporte
For warranty information, technical support, or any questions regarding the Puig 21937N License Plate Holder, please contact Puig directly through their official websitio o distribuidores autorizados.
Se recomienda conservar el comprobante de compra para cualquier reclamo de garantía.
Fabricante: Puig
Websitio: www.puig.tv (Nota: Este es un enlace general al fabricante. websitio y es posible que no conduzca directamente al soporte para este producto específico.)
