Manual del usuario del arrancador de batería GOOLOO GP4000 y del inflador de neumáticos GT150

1. Introducción

Gracias por la compraasing the GOOLOO GP4000 Jump Starter and GT150 Tire Inflator. This comprehensive device combines a powerful car jump starter with a versatile portable air compressor, designed to provide reliable emergency assistance and convenient tire maintenance for a wide range of vehicles and inflatable items. Please read this manual thoroughly before use to ensure proper operation and safety.

Image: The GOOLOO GP4000 Jump Starter (right) and GT150 Tire Inflator (left), showcasing both devices included in the package.

2. Información de seguridad

Observe siempre las siguientes precauciones de seguridad para evitar lesiones o daños a los dispositivos:

• No exponga los dispositivos a temperaturas extremas, luz solar directa o humedad.
• Mantener fuera del alcance de los niños.
• Asegúrese de que haya una ventilación adecuada durante el uso y la carga.
• No desmonte ni modifique los dispositivos.
• For jump starting, connect the red clamp al terminal positivo (+) y al negro clamp to the negative (-) terminal. Reverse polarity can cause damage.
• Evite inflar demasiado los neumáticos u otros artículos. Consulte siempre la presión recomendada por el fabricante.
• Si la batería se agotaamps touch each other, a spark may occur. Avoid this contact.
• No utilice el arrancador si la batería está descargada.amps o cables están dañados.

3. Contenido del paquete

Por favor revise el paquete para ver los siguientes artículos:

• Unidad de arranque GOOLOO GP4000
• GOOLOO GT150 Tire Inflator Unit
• Cables de puente inteligentes (con clamps)
• Cable de carga USB-C
• Various Air Nozzles/Adapters for GT150
• Manual de usuario
• Storage Case (may vary by package)

4. Características y componentes del producto

4.1 Arrancador de batería GOOLOO GP4000

The GP4000 is a powerful and versatile jump starter designed for various vehicles.

• Corriente pico: 4000 Amps
• Compatibilidad del motor: All gasoline engines, up to 10.0L diesel engines.
• Puertos de salida: Dual USB charging ports (one supports fast charging), USB Type-C (5V/3A).
• Puerto de entrada: USB Type-C for recharging the unit.
• Características de seguridad: Reverse polarity protection, over-current protection, short-circuit protection, over-voltage protection, over-charge protection.
• Características adicionales: LED flashlight with multiple modes (steady, strobe, SOS).

Imagen: Detallada view of the GOOLOO GP4000 Jump Starter, highlighting its LED indicator, power button, Type-C input/output, quick charging output, and 15V/10A output port.

Image: The GOOLOO GP4000 Jump Starter demonstrating its capacity to charge multiple devices like smartphones and tablets, suitable for outdoor use.

Inflador de neumáticos 4.2 GOOLOO GT150

The GT150 is a compact and efficient portable air compressor.

• Presión máxima: 150 PSI
• Modos de inflación: 5 preset modes (car, motorcycle, bicycle, ball, customize).
• Unidades de presión: PSI, KPA, BAR, KG/CM².
• Mostrar: Ultra-bright LED screen for real-time and preset pressure values.
• Apagado automático: Automatically stops when preset pressure is reached.
• Portabilidad: Cordless design, easy to carry.

Image: The GOOLOO GT150 Tire Inflator displaying its large LED screen, which provides clear visibility of pressure readings even in bright conditions.

5. Configuración y carga

5.1 Carga del arrancador auxiliar GP4000

Before first use, fully charge the GP4000. It is recommended to recharge the unit after each use or every 3-6 months if not used frequently.

1. Connect the USB-C charging cable to the Type-C input port on the GP4000.
2. Conecte el otro extremo del cable a un adaptador de pared USB (no incluido) o a un puerto USB con alimentación.
3. The LED indicators will show the charging progress. All LEDs will be solid when fully charged.

5.2 Carga del inflador de neumáticos GT150

The GT150 also requires charging before use. Use the provided USB-C cable.

1. Connect the USB-C charging cable to the charging port on the GT150.
2. Connect the other end to a USB wall adapter or powered USB port.
3. La pantalla indicará el estado de carga.

6. Instrucciones de funcionamiento

6.1 Uso del arrancador auxiliar GP4000

Follow these steps to jump start a vehicle:

1. Ensure the GP4000 is sufficiently charged.
2. Connect the blue plug of the smart jumper cables into the jump start port on the GP4000.
3. Conectar el rojo clamp al terminal positivo (+) de la batería del vehículo.
4. Conectar el negro clamp al terminal negativo (-) de la batería del vehículo.
5. Once connected, the indicator light on the smart cable will turn green (or solid green if using BOOST function). If the light is red or flashing, check connections.
6. Arranque el motor del vehículo.
7. Once the vehicle starts, immediately remove the jumper cables from the GP4000, then disconnect the black clamp, seguido de la cl rojaamp de la batería del vehículo.

Note on BOOST Function: If the vehicle battery is extremely low or completely dead, the smart cable may not detect it. In this case, press and hold the "BOOST" button on the smart cable for 3 seconds until the indicator light turns solid green. This bypasses safety checks and forces the jump start. Use with caution.

Image: The GOOLOO GP4000 Jump Starter connected to a car battery, demonstrating the proper setup for jump starting a vehicle.

Image: A comparison highlighting the robust, copper-material clamps of the GOOLOO jump starter against other types, emphasizing durability and reliability.

6.2 Uso del inflador de neumáticos GT150

Inflate tires or other items using the GT150:

1. Ensure the GT150 is sufficiently charged.
2. Connect the air hose to the tire valve stem. Ensure a secure connection to prevent air leakage.
3. Turn on the GT150. The current tire pressure will be displayed.
4. Press the 'M' button to cycle through the 5 preset inflation modes (car, motorcycle, bicycle, ball, custom).
5. Utilice los botones '+' y '-' para ajustar la presión objetivo deseada.
6. Press the power button to start inflation. The inflator will automatically stop when the target pressure is reached.
7. Desconecte la manguera de aire de la válvula del neumático.

Cambio de unidades: Press the unit button (often labeled with a symbol like a gear or 'U') to switch between PSI, KPA, BAR, and KG/CM².

Image: The GOOLOO GT150 Tire Inflator in use, demonstrating its cordless operation while inflating a car tire.

Image: The GOOLOO GT150 Tire Inflator showing its display with both real-time and preset pressure values, indicating its auto shut-off feature.

Image: The GOOLOO GT150 Tire Inflator positioned with various items it can inflate, including car tires, motorcycle tires, bicycle tires, and balls, illustrating its versatility.

7. Mantenimiento

• Limpieza: Limpie los dispositivos con un paño suave y seco. No utilice productos químicos agresivos ni limpiadores abrasivos.
• Almacenamiento: Guarde los dispositivos en un lugar fresco y seco, alejado de la luz solar directa y de la humedad.
• Cuidado de la batería: For optimal battery life, fully charge both units every 3-6 months, even if not in use.
• Inspección de cables: Regularly inspect the jumper cables and air hose for any signs of damage or wear. Replace if necessary.

8. Solución de problemas

9. Especificaciones

10. Garantía y soporte

GOOLOO products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your GP4000 Jump Starter or GT150 Tire Inflator, please contact GOOLOO customer service through their official websitio o el minorista donde se compró el producto.

For more information, visit the official GOOLOO store: Tienda GOOLOO en Amazon