1. Introducción
Thank you for choosing the ErGear EGESD8 Electric Standing Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk. Please read these instructions carefully before use and retain them for future reference. This electric standing desk is designed to offer ergonomic flexibility, allowing you to easily switch between sitting and standing positions, promoting a healthier work environment.

The ErGear Electric Standing Desk, showcasing its sleek design and spacious desktop in a contemporary workspace.
2. Instrucciones de seguridad
Para garantizar un funcionamiento seguro y evitar daños, tenga en cuenta lo siguiente:
- Asegúrese de que todas las conexiones estén seguras antes de utilizar el escritorio.
- Mantenga a los niños y a las mascotas alejados del escritorio durante su funcionamiento.
- Do not place hands or other body parts near moving parts to avoid injury.
- No sobrecargue el escritorio. La capacidad máxima de peso es 80 kilogramos.
- Evite colocar líquidos directamente sobre el panel de control o cerca de componentes eléctricos.
- If the desk makes unusual noises or movements, discontinue use and consult the troubleshooting section or contact support.
- Utilice únicamente el adaptador de corriente y los cables proporcionados.

This image highlights the robust construction of the ErGear Electric Standing Desk, capable of supporting up to 80 kg, ensuring stability even under significant load.
3. Contenido del paquete
Compruebe que todos los componentes estén presentes y sin daños:
- Desktop Panels (assembled)
- Patas de escritorio (2)
- Almohadillas para los pies (2)
- Soportes laterales (2)
- Travesaño
- Varilla de transmisión
- Panel de control
- Adaptador de corriente y cable
- Cable Grommets (2)
- Ganchos para auriculares (2)
- Herrajes de montaje (tornillos, llave Allen)
- Manual de usuario
4. Instrucciones de montaje
Follow these steps to assemble your ErGear Electric Standing Desk. It is recommended to have two people for assembly.
Official assembly video for the ErGear Electric Standing Desk, demonstrating step-by-step installation.
Paso 1: Ensamble el marco
- Attach the side brackets to the desk legs using the provided screws and Allen wrench.
- Secure the foot pads to the bottom of each leg.
- Connect the two leg assemblies with the crossbar, ensuring all screws are tightened.
Step 2: Fix the Transmission Rod
- Insert the transmission rod into the designated openings on both desk legs.
- Ensure the rod is properly seated and secured with the retaining clips or screws.
Step 3: Assemble the Desktop Panel
- Lay the desktop panels face down on a soft, clean surface.
- Align the panels and secure them together using the provided connectors and screws.
Step 4: Attach the Frame to the Desktop
- Carefully place the assembled desk frame onto the underside of the desktop.
- Align the pre-drilled holes and secure the frame to the desktop using the appropriate screws.
- Fije el panel de control a la parte inferior del escritorio en una ubicación conveniente usando los tornillos provistos.
- Install the headphone hooks to the underside of the desktop as desired.
Paso 5: Conecte los cables
- Connect the motor cables from the legs to the control box.
- Connect the control panel cable to the control box.
- Connect the power adapter to the control box and then to a power outlet.
Step 6: Fix the Cable Grommets
- Insert the cable grommets into the pre-cut holes on the desktop to manage cables.
5. Instrucciones de funcionamiento
Your ErGear Electric Standing Desk features an intuitive control panel for easy height adjustment.
Presentación breve en vídeoasing key features of the ErGear Electric Standing Desk, including height adjustment and stability.
Panel de control sobreview

The desk's intelligent control panel features an LED display showing current height in centimeters, along with up/down arrows and four memory preset buttons for quick adjustments.
- Flechas arriba/abajo (▲ / ▼): Press and hold to adjust the desk height manually.
- Pantalla LED: Shows the current height of the desk in centimeters.
- Memory Presets (1, 2, 3, 4): Store and recall preferred height settings.
Ajuste de altura
The desk can be adjusted between 72cm y 118cm.
- Ajuste manual: Press and hold the up (▲) or down (▼) arrow button until the desk reaches your desired height.
- Using Memory Presets: Press the corresponding memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.

This image demonstrates the adjustable height range of the ErGear Electric Standing Desk, showing a user sitting at 72cm and standing at 118cm, emphasizing ergonomic flexibility.
Configuración de ajustes preestablecidos de memoria
- Ajuste el escritorio a la altura deseada utilizando las flechas arriba/abajo.
- Press the 'M' button (if available, or a 'Set' button) followed by the desired memory button (1, 2, 3, or 4). The display will typically flash or beep to confirm the setting is saved.
Operación silenciosa
The desk operates with a quiet motor, producing a noise level of ≤ 55 dB, ensuring a peaceful work environment.

Illustrates the ultra-quiet operation of the ErGear Electric Standing Desk, with a noise level of 55dB, ensuring a peaceful and undisturbed work environment.
6. Mantenimiento
Regular maintenance helps prolong the life of your desk:
- Limpieza: Wipe the desk surface and legs with a soft, damp paño. Evite productos químicos agresivos o limpiadores abrasivos.
- Gestión de cables: Periodically check that all cables are neatly organized and not pinched or tangled. Utilize the integrated cable grommets and hooks.
- Apriete de los tornillos: Occasionally check and tighten any loose screws on the frame or desktop connections.
- Inspección: Inspect the desk for any signs of wear or damage. If any issues are found, contact customer support.

Detalle view of the desk's integrated cable grommets and convenient hooks, designed to help maintain a tidy and organized workspace by managing cables and accessories.
7. Solución de problemas
Si tiene algún problema con su escritorio, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| El escritorio no se mueve. | Cable de alimentación desconectado, cable del motor suelto, sobrecarga. | Check all power and motor connections. Reduce weight on the desk. |
| El escritorio se mueve de manera desigual. | Uneven load, loose screws, obstruction. | Distribuya el peso uniformemente. Revise y apriete todos los tornillos de montaje. Asegúrese de que no haya obstrucciones. |
| El escritorio se detiene durante el ajuste. | Overload protection activated, obstruction. | Remove some weight. Check for obstructions. Wait a few minutes before trying again. |
| El panel de control no responde. | Control panel cable loose, power issue. | Check control panel cable connection. Verify power supply. |
If the problem persists after trying these solutions, please contact ErGear customer support.
8. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | Equipo ErGear |
| Número de modelo | EGESD8 |
| Color | Beige and Natural |
| Dimensiones del escritorio (largo x ancho) | 120 cm x 60 cm |
| Rango de ajuste de altura | 72 cm - 118 cm |
| Material | Wood (Desktop), Metal (Base) |
| Capacidad de peso | 80 kilogramos |
| Nivel de ruido del motor | ≤ 55 dB |
| Características especiales | Ergonomic, Electric, 4 Memory Presets, Cable Grommets, Headphone Hooks |
| Peso del producto | 19.05 kilogramos |

A clear diagram illustrating the overall dimensions of the ErGear Electric Standing Desk, including its 120cm x 60cm desktop and adjustable height range of 72cm to 118cm.
9. Garantía y soporte
ErGear products are designed for durability and performance. This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official ErGear websitio.
If you have any questions, require technical assistance, or need to report a missing or damaged part, please contact ErGear customer support through the retailer where you purchased the product or via the contact information provided on the official ErGear websitio.
Please have your model number (EGESD8) and purchase information ready when contacting support.





