Introducción
Thank you for choosing the Vrabocry DC 5V/12V/24V 17 Key RF Wireless Remote LED Controller. This device is designed to provide versatile control over your 5050, 3528, and 5630 LED strip lights, offering a range of static colors and dynamic modes. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.
Información de seguridad
- Asegúrese de que el volumen de entradatage (5V, 12V, or 24V) matches your LED strip lights and power supply. Incorrect voltage can damage the controller and LED strips.
- Do not expose the controller or remote to moisture or extreme temperatures.
- Desconecte la alimentación antes de realizar cualquier conexión o desconexion.
- Este producto está destinado únicamente para uso en interiores.
- Mantener fuera del alcance de los niños.
Contenido del paquete
El paquete incluye los siguientes artículos:
- 1 x RF Mini RGB Controller
- 1 x 17-Key RF Wireless Remote (CR2025 battery not included)
- 1 x Manual de usuario
Configuración
1. Conexión del controlador
- Connect your LED strip light to the 4-pin output connector of the RF Mini RGB Controller. Ensure the polarity is correct (usually indicated by arrows or markings).
- Connect a compatible DC 5V/12V/24V power supply to the input jack of the RF Mini RGB Controller.
- Verifique que todas las conexiones estén seguras antes de aplicar energía.
Image: The Vrabocry RF Mini RGB Controller connected to its 17-key wireless remote. The controller has a white cable with a 4-pin connector for LED strips and a power input jack.
2. Instalación de la batería del control remoto
The 17-key RF Wireless Remote requires one CR2025 button battery (not included).
- Locate the battery tray on the back of the remote control.
- Gently push the small tab and pull out the battery tray.
- Inserte una nueva batería CR2025 con el lado positivo (+) hacia arriba.
- Deslice la bandeja de la batería nuevamente dentro del control remoto hasta que encaje en su lugar.
Image: The back of the 17-key RF Wireless Remote, illustrating the battery compartment for a CR2025 battery. Instructions for opening and inserting the battery are visible.
Instrucciones de funcionamiento
The 17-key RF Wireless Remote allows for comprehensive control of your LED strip lights. The remote operates using a 433MHz wireless signal, providing control without direct line-of-sight.
Imagen: Frente view of the 17-key RF Wireless Remote Control, displaying all buttons and their labels for various functions.
Funciones del control remoto:
| Botón | Función |
|---|---|
| EN MODO DE ESPERA | Turns the LED lights on or switches to standby mode. |
| MODE+ / MODE- | Switches between 9 dynamic modes or transitions from static lighting to dynamic modes. |
| VELOCIDAD+ / VELOCIDAD- | Ajusta la velocidad de los modos dinámicos (5 niveles). |
| BRIGHT+ / BRIGHT- | Adjusts the brightness of static colors or dynamic modes. |
| COLOR+ / COLOR- | Cycles through 20 static colors. Can also switch from dynamic mode to a static color. |
| SINGLE COLOR SELECT | Directly selects specific static colors: White, Red, Green, Blue, Yellow, Cyan, Pink. |
| MANIFESTACIÓN | Activates a demonstration mode cycling through various dynamic effects. |
Modos dinámicos:
The controller offers 9 dynamic modes, including effects such as strobe, breathing, fading in and out, slow flashing, and flickering. Use the MODO+ y MODO- buttons to cycle through these effects.
Colores estáticos:
There are 20 static colors available. Use the COLOR+ y COLOR- buttons to select your desired color, or use the dedicated single color buttons for quick access to primary colors.
Mantenimiento
- Limpieza: Use a soft, dry cloth to clean the controller and remote. Do not use liquid cleaners or solvents.
- Reemplazo de batería: Replace the CR2025 battery in the remote control when its range decreases or it stops responding. Refer to the "Remote Control Battery Installation" section for instructions.
- Almacenamiento: Guarde el dispositivo en un lugar fresco y seco cuando no lo utilice durante períodos prolongados.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| LED strip lights do not turn on. | No llega energía al controlador. Conexiones incorrectas. La batería del control remoto está muerta. | Compruebe la conexión de la fuente de alimentación. Verify LED strip and power supply connections are secure and correct polarity. Reemplace la batería del control remoto. |
| El control remoto no responde. | Batería muerta o instalada incorrectamente. El control remoto está demasiado lejos del controlador. | Replace CR2025 battery, ensuring correct polarity. Move closer to the controller. The RF signal has a typical range, but obstacles can reduce it. |
| LED colors are incorrect or flickering. | Conexión suelta. Incompatible LED strip type. | Check all 4-pin connections for the LED strip. Ensure your LED strip is a common anode RGB type compatible with this controller. |
Presupuesto
- Volumentage: 5 V - 24 V CC
- Corriente de trabajo: 12A / 3 channels (4A per channel)
- Temperatura de trabajo: -20 °C a 60 °C (-4 °F a 140 °F)
- Dimensiones del controlador: Aproximadamente 1.6 x 0.5 x 0.2 pulgadas (40 x 12.7 x 5 mm)
- Control RGB: 3 output channels, common anode+
- Colores estáticos: 20
- Modos dinámicos: 9
- Niveles de velocidad: 5
- Método de control: 433MHz RF Wireless
- Tipo de batería remota: CR2025 (no incluido)
Garantía y soporte
Vrabocry products are designed for reliability and performance. For warranty information or technical support, please refer to the retailer where you purchased this product or visit the official Vrabocry webSitio web. Conserve su comprobante de compra para reclamaciones de garantía.
Si encuentra algún problema no contemplado en este manual, comuníquese con el servicio de atención al cliente para obtener ayuda.
