Introducción
This manual provides comprehensive instructions for the installation, operation, and maintenance of your HOROW B0400 Elongated Non-Electric Bidet Toilet Seat. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Información de seguridad
- Asegúrese de que todas las conexiones estén seguras para evitar fugas.
- Do not use abrasive cleaners on the bidet seat.
- Este producto está diseñado únicamente para uso doméstico.
- Supervise children and individuals with limited physical capabilities during use.
Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- HOROW B0400 Elongated Bidet Toilet Seat
- Adapter Water Inlet Hose
- Placa de cubierta
- Fixation Part
- Plantilla de instalación
- Manual de usuario (este documento)
Características del producto
- Funcionamiento no eléctrico: No electrical outlet required, manual control for spray pressure.
- Adjustable Dual Nozzles: Features ergonomic water jet design with rear and feminine washing modes.
- Soft-Close Seat Lid: Slow-closing hinges prevent slamming, ensuring quiet operation and extended product life.
- Función de liberación rápida: Permite quitar fácilmente el asiento para limpiarlo.
- Diseño alargado: Measures 20 inches deep by 14.7 inches wide, providing a comfortable seating area.
Figura 1: Adjustable Dual Bidet Nozzles. This image illustrates the two distinct spray patterns for feminine cleaning (soft stream) and rear spray (adjustable pressure).
Figura 2: Premium Seat Design. This image shows a comparison between the HOROW bidet seat and another brand, emphasizing the wider and more ergonomic contact area of the HOROW seat for enhanced comfort.
Dimensiones
The HOROW B0400 bidet toilet seat is designed for elongated toilets. Refer to the diagram below for detailed measurements.
Figura 3: Product Dimensions. This diagram provides a top-down and side view of the bidet seat with key measurements: 20"L x 14.7"W x 3.4"H.
Instrucciones de instalación
Follow these steps for easy DIY installation. Ensure the water supply is turned off before starting.
- Retire el asiento del inodoro existente: Use a screwdriver to remove the bolts securing your current toilet seat.
- Install Fixing Plate: Place the provided fixation part (sliding fixing plate) over the toilet bowl holes.
- Coloque el asiento del bidé: Align the HOROW B0400 bidet seat with the fixing plate and slide it into place until it clicks.
- Conectar el suministro de agua: Turn off the main water supply to the toilet. Disconnect the existing water supply hose from the toilet tank. Install the T-connector (supplied) to the toilet tank's water inlet. Connect the bidet's water inlet hose to the T-connector. Reconnect the main water supply hose to the T-connector.
- Compruebe si hay fugas: Slowly turn on the water supply and check all connections for any leaks.
Figura 4: Installation Process. This image illustrates the four main steps for installing the bidet seat, from removing the old seat to connecting the water supply.
Operación
The HOROW B0400 bidet seat features a side button control for easy operation.
- Ajuste de la presión del agua: Rotate the side button to manually adjust the water spray pressure to your preference.
- Washing Modes: The bidet offers both rear and feminine washing modes. Select the desired mode by rotating the control knob.
Figura 5: Water Pressure Adjustment. This image highlights the side control knob used to adjust water flow and select washing modes.
Mantenimiento
- Limpieza del asiento: Use a soft cloth and mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive pads, as these can damage the surface.
- Limpieza de boquillas: The nozzles are self-cleaning. For deeper cleaning, gently pull out the nozzles and wipe them with a soft cloth.
- Liberación rápida para limpieza: Press the quick-release button to easily detach the seat from the toilet for thorough cleaning of both the seat and the toilet bowl area.
Figura 6: Quick Release Button. This image demonstrates how to use the quick-release button to detach the bidet seat for cleaning.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Sin rociado de agua o rociado débil | Water supply valve is closed; Nozzle is clogged; Water pressure too low. | Ensure the water supply valve is fully open. Clean the nozzle. Adjust the water pressure using the side control. |
| Fugas de agua en las conexiones | Loose connections; Damaged washer. | Tighten all connections securely. Check washers for damage and replace if necessary. |
| Seat does not close softly | Hinges are dirty or damaged. | Clean the soft-close hinges. If damaged, contact customer support for assistance. |
| Difficulty installing T-connector | Incompatible pipe sizes or limited access. | Ensure T-connector fits standard American water supply valves (3/8 or 1/2 inch) or tank inlet (7/8 inch). If space is tight, professional installation may be required. |
Presupuesto
- Modelo: B0400
- Marca: HORO
- Tipo: Asiento de inodoro bidé no eléctrico
- Forma: Alargada (ovalada)
- Material: Plástico
- Color: Blanco
- Dimensiones del producto: 20" de largo x 14.7" de ancho x 3.4" de alto
- Peso del artículo: 4.8 libras
- Compatible Toilet Type: Designed for elongated toilets, including T0338W.
Garantía y soporte
HOROW values customer satisfaction and stands by the quality of its products.
- Garantía: Este producto viene con una garantía limitada de 1 años.
- Servicio postventa: HOROW provides lifetime after-sales service.
- Atención al cliente: For any questions, issues, or warranty claims, please contact HOROW customer service. Responses are typically provided within 12 hours.
