1. Instrucciones de seguridad importantes
Lea y comprenda todas las instrucciones antes de usar este producto. Si no las sigue, podría sufrir una descarga eléctrica, un incendio o lesiones graves.
- No exponga el banco de energía a temperaturas extremas, luz solar directa o alta humedad.
- No desmonte, abra ni intente reparar el banco de energía.
- Mantenga el banco de energía alejado del agua y otros líquidos.
- No deje caer, perfore ni aplique fuerza excesiva sobre el banco de energía.
- Utilice únicamente cables de carga y adaptadores certificados.
- Mantener fuera del alcance de los niños.
- Deseche el banco de energía de forma responsable de acuerdo con las regulaciones locales.
Figura 1.1: The power bank is designed with multiple safety features, including protection against short-circuits, overcharging, and safeguarding connected devices during charging.
2. Contenido del paquete
Verifique que todos los artículos estén presentes en su paquete:
- amazon basics 10000mAh 20W Fast Charging Power Bank
- Cable de carga USB-C a USB-C
- RevistaTag Ring (for non-MagSafe compatible devices)
- Manual de usuario
3. Producto terminadoview
Familiarícese con los componentes de su banco de energía:
Figura 3.1: The amazon basics 10000mAh Power Bank features a sleek design with an integrated kickstand for convenient viewmientras se carga.
- Botón de encendido: Press to check battery level or initiate wireless charging.
- Indicadores LED: Muestra la capacidad restante de la batería.
- Puerto USB-C (Entrada/Salida): Used for charging the power bank and wired charging of devices.
- Almohadilla de carga inalámbrica: Magnetic surface for wireless charging compatible devices.
- Pata de cabra integrada: Allows the power bank to stand upright, supporting a phone for hands-free viewEn.
4. Primeros pasos
4.1 Cargo inicial
Before first use, fully charge your power bank. Connect the provided USB-C cable to the power bank's USB-C port and the other end to a compatible USB wall charger (not included). The LED indicators will illuminate to show charging progress and turn solid when fully charged.
4.2 Attaching the MagTag Ring (for non-MagSafe devices)
If your device is not MagSafe compatible, use the included MagTag ring to enable magnetic attachment for wireless charging:
- Limpie bien la superficie posterior de su teléfono o la funda del teléfono.
- Peel off the adhesive backing from the MagTag anillo.
- Carefully align and press the MagTag ring onto the center of your device's back or case. Ensure it is centered for optimal magnetic connection and wireless charging efficiency.
- Deje que el adhesivo se asiente durante algunas horas antes de usarlo intensamente.
5. Operación
5.1 Carga del banco de energía
Para recargar el banco de energía:
- Conecte el cable USB-C a USB-C provisto al puerto USB-C del banco de energía.
- Connect the other end of the cable to a compatible USB-C wall charger (20W or higher recommended for fast charging).
- The LED indicators will show the charging status. All LEDs will be solid when fully charged.
Figura 5.1: The USB-C port is used for both charging the power bank and charging external devices.
5.2 Dispositivos de carga (con cable)
To charge your device using a wired connection:
- Conecte su dispositivo al puerto USB-C del banco de energía usando un cable USB-C compatible.
- La batería externa comenzará a cargar tu dispositivo automáticamente. De lo contrario, presiona el botón de encendido una vez.
- The LED indicators will show the power bank's remaining battery level.
Figura 5.2: The power bank supports up to 20W wired fast charging via its Type-C port.
5.3 Dispositivos de carga (inalámbricos)
Para cargar su dispositivo de forma inalámbrica:
- Ensure your device is wireless charging compatible (MagSafe or with MagTag anillo).
- Align your device's wireless charging area with the magnetic charging pad on the power bank. The magnets will snap into place.
- Press the power button once to activate wireless charging.
- Su dispositivo debería indicar que se está cargando.
Figura 5.3: Magnetic alignment ensures efficient wireless charging.
Figura 5.4: The power bank is compatible with various devices, including iPhones and AirPods.
5.4 Carga de paso
El banco de energía admite la carga directa, lo que le permite cargar tanto el banco de energía como un dispositivo conectado simultáneamente.
- Connect the power bank to a wall charger using the USB-C cable.
- Connect your device (wired or wirelessly) to the power bank.
- The power bank will charge itself while also providing power to your connected device.
Figura 5.5: Pass-through charging allows simultaneous charging of the power bank and a connected device.
6. Cuidado y mantenimiento
- Limpie la batería externa con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes.
- Guarde el banco de energía en un lugar fresco y seco cuando no esté en uso.
- Avoid storing the power bank with a completely depleted battery for extended periods. Charge it at least once every three months to maintain battery health.
7. Solución de problemas
| Problema | Posible solución |
|---|---|
| El banco de energía no carga | Ensure the charging cable and wall adapter are working correctly. Check the USB-C connection. |
| El dispositivo no se carga (con cable) | Ensure the cable is securely connected to both the power bank and the device. Press the power button on the power bank. Check if the power bank has sufficient charge. |
| El dispositivo no se carga (inalámbrico) | Ensure your device is wireless charging compatible and properly aligned with the power bank's charging pad. Press the power button. Remove any thick cases that might interfere with wireless charging. If your phone is not MagSafe compatible, ensure the MagTag ring is correctly attached. |
| El banco de energía se calienta durante el uso | Es normal que la batería externa se caliente ligeramente durante la carga o descarga. Si se calienta demasiado, deje de usarla y contacte con el servicio de asistencia. |
| Los indicadores LED no funcionan | Press the power button to check the battery level. If still unresponsive, the power bank may be fully discharged or require service. |
8. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | ABPB10K15W |
| Capacidad de la batería | 10000 mAh |
| Salida cableada | Up to 20W (USB-C Power Delivery) |
| Salida inalámbrica | Hasta 15W |
| Input (Charging Power Bank) | USB-C (20W recommended) |
| Características especiales | Fast Charging, Wireless Charging, Magnetic Hold, Pass-Through Charging |
| Dimensiones | 11.1 x 8.9 x 2.9 cm |
| Peso | 208 gramos |
| Tipo de batería | Polímero de litio |
| País natal | India |
9. Garantía y soporte
This amazon basics product is typically covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official amazon basics websitio.
For technical support, troubleshooting assistance, or warranty claims, please contact amazon basics customer service through the Amazon website or your purchase platform. Have your product model number (ABPB10K15W) and purchase details ready.
También puede encontrar recursos de soporte adicionales y preguntas frecuentes en Tienda de Amazon Basics.
