Introducción
Thank you for choosing the EverBrite Rechargeable Underhood Work Light. This manual provides essential information for the safe and efficient use of your new work light. Please read it thoroughly before operation and retain it for future reference.
Image: The EverBrite Rechargeable Underhood Work Light, showing its flexible light strip and magnetic ends with adjustable straps.
Características del producto
- Tres modos de iluminación: High, Medium, and Low settings to adapt to various lighting requirements.
- Carga rápida USB-C: Equipped with two USB-C charging ports and LED indicators (red for charging, green for full charge).
- Diseño de base magnética: Integrated magnets allow secure attachment to metal surfaces for hands-free operation.
- Adjustable Elastic Strap: Durable nylon strap designed to fit vehicle hoods from 52 to 75 inches wide, providing a secure and flexible fit.
- Ganchos dobles: Sturdy hooks on both ends offer additional stability and mounting options.
¿Qué hay en la caja?
- EverBrite Rechargeable Underhood Work Light (Model E111014AE)
- Cable de carga USB-C
- Manual de instrucciones
Image: Diagram showing the light strip, switch button, magnetic base, charging port, charging indicator, adjustable strap, and hook components.
Configuración e instalación
- Prepara la luz: Unfold the work light. Ensure the elastic straps are properly attached to the magnetic ends.
- Position on Hood: Open the vehicle's hood. Place the magnetic ends of the light onto the metal frame of the hood. The magnets will securely hold the light in place.
- Sujetar con correas: Extend the adjustable elastic straps over the hood. Hook the ends of the straps onto suitable points on the hood or vehicle frame to provide additional stability and prevent accidental dislodgement. Adjust the strap length to ensure a snug fit across the hood (compatible with hoods 52 to 75 inches wide).
- Ajustar la dirección de la luz: The flexible light strip can be bent and angled to direct illumination precisely where needed within the engine bay.
Image: The EverBrite work light installed under a car hood, illuminating the engine bay. The adjustable straps are visible.
Imagen: Primer plano view of the hanging hooks on the EverBrite work light, designed for securing the fixture.
Image: The magnetic base of the EverBrite work light attached to a metal pegboard, demonstrating its hands-free capability.
Instrucciones de funcionamiento
- Encendido/apagado: Short press the switch button located on either end of the light to turn it ON.
- Recorrer los modos: Once ON, short press the switch button repeatedly to cycle through the three lighting modes: High, Medium, Low, and then OFF.
- Mode Sequence: High Brightness → Medium Brightness → Low Brightness → OFF.
Image: The EverBrite work light displaying its three distinct lighting modes: Low (200LM, 14H), Medium (400LM, 6H), and High (900LM, 3.5H).
Vídeo: Un overview of the EverBrite Rechargeable Underhood Work Light, demonstrating its features and operation.
Instrucciones de carga
- Conectar el cargador: Locate the USB-C charging port on the side of the light. Open the protective cover and insert the provided USB-C cable.
- Monitorear el estado de carga: An LED indicator will illuminate red to show that the device is charging.
- Indicación de carga completa: The LED indicator will turn green when the battery is fully charged. A full charge typically takes approximately 2 hours.
- Desconectar: Once fully charged, disconnect the USB-C cable and close the protective cover to maintain water resistance.
Precaución: Do not operate the light while it is charging.
Image: Close-up of the EverBrite work light showing the USB-C charging port and the red/green LED charging indicators.
Mantenimiento
- Limpieza: Limpie la luz con un paño suave yamp Paño. No utilice limpiadores abrasivos ni disolventes.
- Almacenamiento: Store the work light in a cool, dry place away from direct sunlight when not in use.
- Cuidado de la batería: To prolong battery life, charge the device fully before long-term storage and recharge every 3-6 months.
Solución de problemas
- La luz no se enciende:
- Asegúrese de que la batería esté cargada. Conéctela a una fuente de alimentación y verifique el indicador de carga.
- Presione firmemente el botón de encendido.
- La luz no retiene la carga:
- Verifique que el cable de carga y el adaptador funcionen correctamente.
- Asegúrese de que el puerto de carga esté limpio y libre de residuos.
- Magnets Not Holding Securely:
- Ensure the surface is clean and metallic.
- Use the adjustable straps and hooks for additional support, especially on uneven or painted surfaces.
Presupuesto
| Parámetro | Valor |
|---|---|
| Fuente de poder | Batería de iones de litio |
| Capacidad de la batería | 2200 mAh |
| Brillo máximo | 1000LM |
| Max Running Time (Low Mode) | Hasta 14 horas |
| Max Running Time (High Mode) | Hasta 3.5 horas |
| Peso | 10.9 onzas (310 g) |
| Dimensiones | 8.66 x 4.72 x 2.05 inches (1400*40*32MM) |
| Distancia máxima del haz | 40 millones |
| Puerto de carga | USB-C (2 puertos) |
| Hood Compatibility | De 52 a 75 pulgadas de ancho |
Información de seguridad
- Do not look directly into the light source when operating on high brightness to avoid eye strain.
- Mantener fuera del alcance de los niños.
- No desmonte ni modifique el producto.
- Avoid exposing the product to extreme temperatures or direct flame.
- Asegúrese de que la tapa del puerto de carga esté bien cerrada cuando no esté cargando para mantener la resistencia al agua.
Garantía y soporte
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EverBrite websitio.
