UeeVii CPE5824 Dual Band Wireless Bridge User Manual

1. Producto terminadoview

The UeeVii CPE5824 is a high-performance, dual-band wireless bridge designed for extending network connectivity over long distances. It supports both 2.4GHz and 5GHz frequencies, offering enhanced compatibility and stability. This device is ideal for creating point-to-point or point-to-multipoint wireless links, suitable for various outdoor applications such as extending network to barns, shops, garages, or for IP camera surveillance.

Figure 1: UeeVii CPE5824 Wireless Bridge Units

2. Contenido del paquete

Verifique que todos los artículos enumerados a continuación estén incluidos en su paquete:

• 2 x Dual Band Wireless Bridge Units
• 2 adaptadores PoE de 24 V
• 2 cables de red.
• 1 x Manual de usuario

Figura 2: Componentes del paquete incluidos

3. Características principales

• Dual-Band Wireless Link: Supports both 2.4GHz and 5GHz frequencies, ensuring compatibility with a wide range of devices and providing enhanced stability and anti-interference capabilities.

Figure 3: Dual-Band Transmission Capability
• Transferencia de datos de alta velocidad: Equipped with two 1000Mbps RJ45 ports, supporting a maximum transfer speed of 1200Mbps and a network speed of 433Mbps.


Figura 4: Rendimiento de alta velocidad

• Transmisión de largo alcance: Features a 16dBi directional antenna with a maximum 27dBm power output, capable of automatically adjusting power to environmental changes. Achieves a transmission distance of up to 5km in barrier-free environments. Actual application distance may vary.


Figure 5: Long-Range Transmission

• Configuración de conectar y usar: The two-pack wireless bridges come pre-paired for simple point-to-point or point-to-multipoint applications, requiring minimal technical knowledge for initial setup.
• Versatile Network Extension: Extends network range to secondary buildings (e.g., barn, shop, warehouse, garage) or extends IP camera surveillance range. Supports WDS networking mode for video and network compatibility.
• Carcasa resistente a la intemperie IP65: Designed for continuous operation in harsh outdoor environments, providing protection against dust and water ingress.

Figura 6: Diseño resistente a la intemperie
• Fuente de alimentación PoE: Supports 24V Power over Ethernet (PoE) for simplified installation and deployment, reducing cable clutter.


Figure 7: PoE Power Supply

4. Guía de configuración

4.1 Initial Configuration (Pre-paired)

The UeeVii CPE5824 units are pre-paired from the factory for ease of use. One unit is designated as the Master bridge and the other as the Slave bridge. This allows for immediate plug-and-play functionality in most point-to-point scenarios.

Figure 8: Master and Slave Bridge Configuration

4.2 Instalación física

For optimal performance, ensure a clear line of sight between the Master and Slave units. Mount the units securely in their desired outdoor locations, such as on a pole or wall, using appropriate mounting hardware (not included, but standard pole clamps are provided).

• Choose a mounting location that provides an unobstructed path between the two units.
• Ensure the units are mounted vertically with the indicator lights facing downwards to prevent water ingress.
• Utilice el soporte para poste proporcionadoamps or suitable wall mounts to secure the devices.

Figura 9: Example Mounting Configurations

4.3 Pasos de conexión

1. Connect one end of an Ethernet cable to the LAN port of the PoE adapter.
2. Connect the other end of the Ethernet cable from the PoE adapter's LAN port to your router or network switch.
3. Connect an Ethernet cable from the PoE port of the PoE adapter to the PoE/LAN port on the UeeVii wireless bridge unit.
4. Conecte el adaptador PoE a una toma de corriente.
5. Repeat these steps for both the Master and Slave units.

Figura 10: Conexión del puerto Ethernet

4.4 Web GUI Configuration (Optional)

While the units are pre-paired, advanced settings and monitoring can be accessed via the web-based Graphical User Interface (GUI). Refer to the included user manual for default IP addresses and login credentials.

Figura 11: Web Acceso GUI

5. Instrucciones de funcionamiento

5.1 Modo punto a punto (PTP)

In PTP mode, two CPE units establish a direct wireless link to extend network connectivity between two locations. This acts as a virtual Ethernet cable.

Figure 12: Point-to-Point Configuration

Figure 13: Point-to-Point Network Diagram

5.2 Modo punto a multipunto (PTMP)

In PTMP mode, one Master CPE unit can connect wirelessly to multiple Slave CPE units or IP cameras, allowing for centralized network distribution or surveillance extension.

Figure 14: Point-to-Multipoint Network Diagram

5.3 Modo repetidor inalámbrico

If the distance between two points is too great for a direct link, a third CPE unit can be set up as a relay point (repeater) in an open area between them to extend the wireless transmission range.

Figure 15: Wireless Repeater Setup

5.4 Broadcasting WiFi

Both CPE units can be configured to broadcast a Wi-Fi hotspot, providing wireless access at the remote location.

Figure 16: WiFi Hotspot Access

6. Mantenimiento

The UeeVii CPE5824 is designed for outdoor use with an IP65 weatherproof rating, requiring minimal maintenance. However, periodic checks can ensure optimal performance and longevity:

• Inspección visual: Periodically inspect the units and cables for any signs of physical damage, wear, or corrosion.
• Línea de visión clara: Ensure that the line of sight between the units remains unobstructed by new foliage growth or structures.
• Limpieza: Si es necesario, limpie suavemente el exterior de las unidades con un paño suave.amp paño. No utilice productos químicos agresivos ni materiales abrasivos.
• Actualizaciones de firmware: Check the UeeVii official websitio para obtener actualizaciones de firmware disponibles para garantizar que el dispositivo funcione con las últimas funciones y mejoras de seguridad.

7. Solución de problemas

If you encounter issues with your UeeVii CPE5824 Wireless Bridge, consider the following troubleshooting steps:

• Sin conexión/señal deficiente:
  • Línea de visión: Ensure there is a clear, unobstructed line of sight between the Master and Slave units. Obstacles like trees, buildings, or dense foliage can significantly degrade signal quality.
  • Alineación: Verify that both units are precisely aligned with each other. Slight adjustments can make a significant difference in signal strength.
  • Distancia: While rated for up to 5km, actual performance depends on environmental factors. Ensure the distance is within practical limits for your environment.
  • Fuerza: Confirm that both units are receiving power from their respective PoE adapters and that the adapters are plugged into working outlets.
• Problemas de conectividad de red:
  • Cables Ethernet: Check all Ethernet cable connections. Ensure they are securely plugged in and not damaged. Try swapping cables if possible.
  • Enrutador/Conmutador: Verify that your main router or network switch is functioning correctly and providing internet access.
  • Conflicto de dirección IP: If you manually configured IP addresses, ensure there are no conflicts on your network. Consider resetting units to factory defaults if unsure (refer to the full user manual for reset procedures).
• Velocidades lentas:
  • Interferencia: Dual-band support helps, but other wireless devices or strong electromagnetic fields can cause interference. Try adjusting the channel settings via the web GUI
  • Obstrucciones: Even partial obstructions can reduce speed. Re-evaluate the line of sight.
  • Carga de red: High network traffic or multiple devices connected to the remote network can impact perceived speed.
• Accediendo Web Interfaz gráfica de usuario:
  • Dirección IP: Ensure your computer's IP address is in the same subnet as the CPE unit's default IP address (e.g., if CPE is 192.168.1.254, set your computer to 192.168.1.X, where X is not 254).
  • Navegador: Prueba una opción diferente web navegador o borre el caché de su navegador.

8. Especificaciones

9. Garantía y soporte

UeeVii products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official UeeVii website. For technical support, product inquiries, or assistance with setup and troubleshooting, please contact UeeVii customer service through their official channels.

Puede encontrar más información y recursos de apoyo en UeeVii Brand Store on Amazon.