greencycle B0DLGJY5TY

Ciclo verde 15 Amp USB Electrical Outlet Instruction Manual

Model: B0DLGJY5TY

1. Introducción

This manual provides essential instructions for the safe installation, operation, and maintenance of your Greencycle 15 Amp USB Electrical Outlet. Please read this manual thoroughly before installation and retain it for future reference.

The Greencycle 4-in-1 Receptacle combines two standard 15A 125V AC outlets with two 5V 2A USB charging ports, offering a convenient solution for powering and charging multiple devices simultaneously.

2. Información de seguridad

ADVERTENCIA: Risk of electric shock. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installation or servicing.

3. Contenido del paquete

4. Características del producto

5. Especificaciones

ParámetroValor
Clasificación eléctrica15A 125V CA 60Hz
Max. Potencia nominal1800 vatios
Puertos de cargador USB2 puertos
USB Electrical ParameterDC 5V, 2A (Total)
Entrada USB90-250V AC
USB No-load Power Consumption<0.3A
Dimensiones (aprox.)4.75" x 2.75" x 1.75" (Fits standard wall box)
CertificacionesETL, cETL, FCC Listed

6. Instrucciones de instalación

Antes de comenzar: Ensure power is OFF at the circuit breaker. Use appropriate safety gear.

  1. Apagar la energía: Locate the circuit breaker controlling the outlet you wish to replace and switch it to the OFF position. Verify power is off using a voltage probador.
  2. Eliminar salida antigua: Unscrew and carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wire was connected to which terminal (hot, neutral, ground).
  3. Prepare los cables: If necessary, strip approximately 1/2 inch of insulation from the ends of the wires.
  4. Connect Wires to New Outlet: The Greencycle outlet supports both side-wiring (wrapping wires around screws) and back-wiring (inserting wires into holes and tightening screws).
    • Conectar el cable de tierra de cobre verde o desnudo hacia tornillo de tierra verde.
    • Conectar el cable neutro blanco hacia silver screw terminal.
    • Conectar el black or colored hot wire hacia brass screw terminal.
    Diagram showing the steps for plug-in wiring: loosen screw, press screw, insert wire, tighten screw clockwise.

    Image: Plug-in Wiring Steps. This diagram illustrates the four steps for connecting wires to the outlet: 1. Loosen the screw, 2. Press the screw (for back-wiring), 3. Insert the wire, 4. Tighten the screw clockwise to secure the connection.

  5. Salida segura: Carefully fold the wires into the electrical box and secure the new outlet to the box using the provided screws.
  6. Instale la placa de pared: Attach the new wall plate over the outlet.
  7. Restaurar energía: Turn the power back ON at the circuit breaker. Test the AC outlets and USB ports to ensure proper function.
Image showing the dimensions of the Greencycle USB outlet, indicating it fits standard wall plates and electrical wall boxes.

Image: Outlet Dimensions. This image provides approximate measurements of the outlet, confirming its compatibility with standard wall plates and electrical boxes.

7. Operación

Using your Greencycle USB Electrical Outlet is straightforward:

Image showing a Greencycle USB outlet with two USB cables plugged into the USB ports, charging two smartphones, demonstrating the 'No Need Adapters' feature.

Image: Direct USB Charging. This image illustrates how to charge two USB devices simultaneously without requiring bulky adapters, simplifying your charging setup.

Image showing a Greencycle USB outlet with various compatible devices like a refrigerator, tablet, PlayStation 5, kettle, mixer, toaster oven, projector, and desktop computer, highlighting its broad compatibility.

Image: Device Compatibility. This image visually represents the wide range of devices compatible with the Greencycle outlet, including household appliances and personal electronics.

8. Mantenimiento

9. Solución de problemas

ProblemaPosible causaSolución
No hay alimentación desde las tomas de CA ni los puertos USB.Circuit breaker tripped.Loose wiring connection.Faulty outlet.Check and reset the circuit breaker.Turn off power, inspect wiring, and tighten connections.If problem persists, replace the outlet (with power off).
Los dispositivos USB no se cargan o se cargan lentamente.Device requires more than 2A total.Faulty USB cable.Device not compatible.Ensure total current draw does not exceed 2A. Charge one device at a time if necessary.Try a different USB cable.Verify device compatibility with 5V 2A USB charging.
La salida se siente cálida.Normal operation with high load.Overload or loose connection.Slight warmth is normal. If it's excessively hot, disconnect devices immediately.Reduce load on the outlet. Turn off power and check wiring connections.

10. Garantía y soporte

Greencycle provides a 1 año de garantía for this product, covering defects in materials and workmanship from the date of purchase. This warranty does not cover damage caused by improper installation, misuse, abuse, or unauthorized modifications.

For technical support or warranty claims, please contact Greencycle customer service through the retailer where the product was purchased or visit the official Greencycle websitio.

Documentos relacionados - B0DLGJY5TY

Preview Long-range Split Driveway Alarm PRO User Manual | Greencycle
Comprehensive user manual for the Greencycle Long-range Split Driveway Alarm PRO. Includes setup, installation, technical specifications, and troubleshooting for this 900ft wireless alert system.
Preview Manual del usuario del sistema de interruptor inalámbrico Greencycle
Manual de usuario del sistema de interruptor inalámbrico Greencycle, que detalla la instalación, el emparejamiento, el funcionamiento y las especificaciones de varios modelos de interruptores y receptores inalámbricos.