Introducción
This instruction manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Enhulk Pro Cordless Pool Vacuum. Please read this manual thoroughly before first use and keep it for future reference.
Información de seguridad
Always follow basic safety precautions when using electrical appliances, especially near water. Ensure the unit is fully submerged before activation. Do not operate the vacuum out of water for extended periods. Always charge the unit in a dry, covered area. Keep out of reach of children.
Contenido del paquete
Verifique que todos los componentes estén presentes antes del ensamblaje:
- Main Vacuum Unit (Fuselage)
- 13.4" Wide Vacuum Head (Triangular Brush Head)
- Telescopic Pole (87.5 inches)
- Short Handle (43 inches)
- Cargador
- Filter Bags (2x: 180 micron for large debris, 500 micron for fine particles)
- Manual del producto
Figure 1: Main vacuum unit, telescopic pole, short handle, charger, and filter bags.
Figura 2: detallada view of all included parts for the Enhulk PC18 pool vacuum.
Instrucciones de montaje
- Cargar la batería: Connect the charger to the main vacuum unit. The indicator light will show charging status. A full charge takes approximately 2 hours.
- Load Brushes (if detached): Ensure the brushes are securely attached to the vacuum head.
- Instale el filtro: Open the cleaning cover and insert the desired filter bag (180 micron for large debris, 500 micron for fine particles) into the filter compartment. Close the cover securely.
- Connect the Body Part: Attach the main vacuum unit to the vacuum head, ensuring it clicks into place.
- Insert the Vacuum Brush Head: Secure the assembled vacuum head to the main unit.
- Coloque la manija: Choose between the 87.5-inch telescopic pole for larger pools or the 43-inch short handle for spot cleaning and steps. Insert the chosen handle into the top of the main unit until it locks.
Figure 3: Visual guide for assembling your Enhulk pool vacuum.
Instrucciones de funcionamiento
Uso inicial
Before first use, ensure the battery is fully charged. Select the appropriate filter bag based on the type of debris in your pool.
Powering On and Submerging
Press the power button located on the main unit. Submerge the vacuum unit completely into the water. The unit will activate once fully submerged. If the unit is removed from water for more than 60 seconds, it will automatically shut off to prevent damage.
Técnica de limpieza
Move the vacuum slowly and steadily across the pool floor, walls, and steps. The 13.4-inch wide head and side brushes are designed to efficiently sweep debris towards the intake. For corners and tight spots, the unit can be used without the wide brush head for precision cleaning.
Video 1: Official demonstration of the Enhulk PC18 Cordless Pool Vacuum in action.
Figure 4: The 13.4-inch super head and 40W motor deliver 18.5 gal/min suction power.
Figure 5: Dual cleaning head for efficient cleaning of pool floors, corners, and steps.
Figure 6: Powered by a 52Wh high-capacity battery, offering 70 minutes of runtime and 2-hour fast charging.
Figure 7: Ergonomic extended pole and handle reduce strain for comfortable cleaning.
Figure 8: The 87.5-inch telescopic pole ensures cleaning of large pools.
Figure 9: Multi-function vacuum head with side brushes assists in wall cleaning.
Mantenimiento
Limpieza de filtros
After each use, or when suction power decreases, remove the filter bag from the unit. Empty collected debris and rinse the filter bag thoroughly with clean water. Allow the filter bag to dry completely before re-installing or storing.
Almacenamiento
Store the vacuum in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the unit is clean and dry before storage to prevent mildew or damage.
Figure 10: The package includes both 180 micron and 500 micron filter bags for different debris types.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| No Suction / Weak Suction | Clogged filter bag; Low battery; Debris stuck in intake. | Clean/empty filter bag; Recharge battery; Remove debris from intake. |
| La unidad no se enciende | Battery not charged; Not fully submerged in water. | Charge battery; Ensure unit is completely underwater. |
| Debris Escaping Filter | Incorrect filter type for debris; Filter not properly installed. | Use finer mesh filter (500 micron); Re-install filter securely. |
Especificaciones del producto
| Característica | Detalle |
|---|---|
| Nombre del modelo | PC18 |
| Marca | Enhulk |
| Fuente de poder | Funciona con pilas |
| Capacidad | 18.5 galones por minuto |
| Tiempo de carga | 2 horas |
| Tiempo de ejecución | 70 minutos |
| Dimensiones del producto | 7.87 x 4.72 x 27.56 pulgadas |
| Peso del artículo | 8.33 libras |
| Tipo de batería | Iones de litio |
| Peso de la batería | 400 gramos |
| Método de control | Tocar |
| Requiere ensamblaje | Sí |
Garantía y soporte
Your Enhulk Pro Cordless Pool Vacuum is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or to order replacement parts, please contact Enhulk customer service via their official websitio o la información de contacto proporcionada en la documentación de la garantía.
Visita el Enhulk Store Para más información.
