Kicker KS-Series 6x9 Coaxial Speakers Instruction Manual
Modelo: 51KSC6904
Introducción
This manual provides detailed instructions for the installation, operation, and maintenance of your Kicker KS-Series 6x9 Coaxial Speakers (Model 51KSC6904). Please read this manual thoroughly before attempting installation or operation to ensure proper use and to maximize the performance and longevity of your speakers.
Información importante de seguridad
- Instalación profesional recomendada: For optimal performance and safety, it is highly recommended that these speakers be installed by a qualified car audio professional.
- Manejo de potencia: Asegúrese de que su amplifier's power output matches the recommended power handling of these speakers to prevent damage. Overpowering or underpowering can lead to speaker failure.
- Alambrado: Always use appropriate gauge wiring for speaker connections. Incorrect wiring can cause overheating or damage to your audio system.
- Ventilación: Asegúrese de que haya una ventilación adecuada alrededor de los altavoces y amplificador para evitar el sobrecalentamiento.
- Protección auditiva: La exposición prolongada a niveles de volumen altos puede causar daño auditivo permanente. Tenga cuidado al ajustar el volumen.
Contenido del paquete
Before beginning installation, please verify that all the following items are included in your package:
- 2 x Kicker 51KSC6904 KS-Series 6x9" Coaxial Speakers
- 2 x 1" Silk-dome Tweeters (integrated)
- 2 x rejillas de altavoz
- Herrajes de montaje (tornillos, clips)
- 1 x Kicker Branded Can Koozie (bundle accessory)
Image: Pair of Kicker KS-Series 6x9 Coaxial Speakers with grilles.
Image: One Kicker KS-Series 6x9 Coaxial Speaker with its protective grille.
Image: One Kicker KS-Series 6x9 Coaxial Speaker without its grille, showing the cone and tweeter.
Image: A single protective grille for the Kicker KS-Series 6x9 speaker.
Image: Kicker branded can koozie, included as a bundle accessory.
Guía de instalación
Consideraciones de montaje
The Kicker KS-Series speakers feature a thin-mount design, allowing them to fit easily behind most factory grilles and in various vehicle applications. Before mounting, ensure the chosen location provides sufficient clearance for the speaker's depth and diameter.
- Diámetro del orificio de montaje: 5-11/16 x 8-7/16 inches (14.45 x 21.43 cm)
- Top Mount Depth: 3-3/16 pulgadas (8.1 cm)
- Bottom Mount Depth: 3-11/16 pulgadas (9.37 cm)
- Tweeter Protrusion: 1 cm (16/0.16 de pulgada)
Use the provided mounting hardware to secure the speakers firmly in place. Avoid over-tightening screws, which can damage the speaker frame.
Instrucciones de cableado
These speakers have a rated impedance of 4 ohms. Connect the speakers to an amplifier that is stable at a 4-ohm load and provides a recommended power output of up to 150 watts RMS per channel. Ensure correct polarity (+ to + and - to -) when connecting the speaker wires to both the speaker terminals and the amplifier terminals. Incorrect polarity can lead to reduced bass response and poor sound imaging.
It is recommended to use high-quality speaker wire of appropriate gauge (e.g., 16-gauge or thicker) for optimal power transfer and sound quality.
Operación
Once installed, connect your audio source to the amplificador. Comience con el amplifier's gain settings at their minimum and gradually increase them until the desired volume is achieved without distortion. These speakers are designed to deliver clear and detailed audio reproduction across a wide frequency range.
Período de rodaje: Like many audio components, these speakers may benefit from a break-in period. Play them at moderate volumes for several hours before attempting to play them at their maximum capabilities. This allows the speaker's suspension components to loosen and perform optimally.
Mantenimiento y cuidado
- Limpieza: Use a soft, dry cloth to clean the speaker grilles and surrounds. Avoid using harsh chemicals or abrasive cleaners.
- Condiciones ambientales: While designed for automotive use, avoid exposing the speakers to excessive moisture, extreme temperatures, or direct sunlight for prolonged periods, as this can degrade materials over time.
- Inspección: Periodically inspect speaker cones and surrounds for any signs of damage or wear.
Solución de problemas
If you experience issues with your Kicker KS-Series speakers, refer to the table below for common problems and their solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| No hay sonido de los altavoces | Cableado suelto o desconectado AmpEl lifador no está encendido Selección de entrada incorrecta en la unidad principal | Compruebe todos los altavoces y ampconexiones más duraderas Verificar amplifier power and fuse Ensure correct audio source is selected |
| Sonido distorsionado o poco claro | AmpLa ganancia del energizador está configurada demasiado alta Cables de altavoz en cortocircuito Cono/envolvente del altavoz dañado | Reducir ampGanancia del elevador Inspect wiring for shorts Contact Kicker support for speaker inspection/replacement |
| Bajos débiles o nulos | Polaridad incorrecta del altavoz Configuración de cruce incorrecta Insuficiente amppoder elevador | Verify speaker wire polarity Adjust head unit or amplifier crossover settings Asegurar amplifier provides adequate power |
| Sonido intermitente | Conexiones sueltas Calentamiento excesivo ampmás vivaz | Compruebe todas las conexiones del cableado Asegúrese de que haya una ventilación adecuada para amplifier; reduce volume |
Especificaciones técnicas
| Característica | Especificación |
|---|---|
| Diseño de altavoces | coaxial de 2 vías |
| Tamaño del woofer | 6x9 pulgadas |
| Tamaño del tweeter | 1 pulgadas |
| Impedancia nominal | 4 ohmios |
| Recomendado AmpPotencia del generador (RMS) | 150 vatios |
| Sensibilidad | 92 dB |
| Respuesta de frecuencia | 30-21 k Hz |
| Diámetro del orificio de montaje | 5-11/16 x 8-7/16 inches (14.45 x 21.43 cm) |
| Top Mount Depth | 3-3/16 pulgadas (8.1 cm) |
| Bottom Mount Depth | 3-11/16 pulgadas (9.37 cm) |
| Protuberancia del tweeter | 1 cm (16/0.16 de pulgada) |
| Material de altavoz de graves | Polypropylene with Rubber Surrounds |
| Material del altavoz de agudos | Cúpula de seda |
| Peso del artículo | 15.9 libras (7.21 kg) |
| Dimensiones del paquete | 18.63 x 12 x 4.44 pulgadas (47.32 x 30.48 x 11.28 cm) |
Garantía y atención al cliente
Kicker products are designed for durability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Kicker webSitio. Conserve su comprobante de compra para reclamaciones de garantía.
If you require technical assistance, troubleshooting beyond this manual, or warranty service, please contact Kicker customer support through their official website or authorized service centers. Provide your product model number (51KSC6904) and a detailed description of the issue when contacting support.
