1. Producto terminadoview
This manual provides detailed instructions for the UeeVii CPE450 Wireless Bridges (4-Pack) and WR3000K WiFi Router (1 Set). This comprehensive network suite is designed to extend your network wirelessly over long distances and provide robust indoor Wi-Fi coverage.
The UeeVii CPE450 wireless bridges enable point-to-point wireless network expansion, ideal for connecting remote buildings or areas without direct cable access. The WR3000K WiFi 6 router enhances signal coverage and data efficiency within your home or office.
Figure 1.1: UeeVii CPE450 Wireless Bridges (4 units) and WR3000K WiFi Router (1 unit) included in the set.
2. Contenido del paquete
- 4 x UeeVii CPE450 Wireless Bridges (2 sets of 2 bridges)
- 1 x UeeVii WR3000K Dual Band WiFi6 WiFi Router
- Associated Power Adapters (PoE adapters for bridges)
- Manual de usuario (este documento)
3. Instrucciones de configuración
3.1. CPE450 Wireless Bridge Setup (Point-to-Point)
The CPE450 bridges are designed for outdoor point-to-point wireless connections. One bridge acts as the 'Master' and the other as the 'Slave'.
- Montaje: Securely mount the CPE450 bridges in desired outdoor locations, ensuring a clear line of sight between the Master and Slave units for optimal performance. The bridges are IP65 waterproof for outdoor use.
- Powering via PoE: Connect the PoE adapter to the CPE450 bridge. The LAN1 port supports non-standard 24V/48V PoE, and LAN2 supports standard 48V PoE.
- Conexión del puente maestro:
- Connect the LAN port of the Master CPE450's PoE adapter to your existing router or network switch.
- Conexión del puente esclavo:
- Connect the LAN port of the Slave CPE450's PoE adapter to your desired network device (e.g., computer, switch, or the WR3000K router).
- Configuración: The bridges are typically pre-configured for point-to-point operation. If manual configuration is required, refer to the advanced settings section (not covered in this basic manual, refer to manufacturer's website for detailed firmware configuration).
Figura 3.1: Example setup for extending network to another location using CPE450 bridges.
Figura 3.2: Example setup for extending a monitoring system using CPE450 bridges.
Figure 3.3: CPE450 bridge powered via PoE adapter.
3.2. WR3000K WiFi Router Setup
The WR3000K router provides Wi-Fi coverage for your indoor environment.
- Conexión de energía: Connect the power adapter to the WR3000K router and plug it into a power outlet.
- Conexión a Internet: Connect an Ethernet cable from your modem or the Slave CPE450 bridge (if using the bridge for internet backhaul) to the WAN port of the WR3000K router.
- Conexión del dispositivo: Connect your devices (computers, smartphones, tablets) to the router via Wi-Fi or by connecting an Ethernet cable to one of the LAN ports.
- Configuracion inicial: Refer to the quick start guide included with the WR3000K router for initial Wi-Fi name (SSID) and password setup.
Figure 3.4: WR3000K Dual-Band WiFi 6 Router in an operational setting.
4. Instrucciones de funcionamiento
4.1. CPE450 Wireless Bridge Operation
Once properly set up, the CPE450 bridges establish a stable wireless link, extending your network.
- Velocidad de datos: The bridges offer a data transfer speed of up to 300Mbps between point-to-point connections on the 5.8GHz band.
- Puertos LAN: Each bridge is equipped with dual 10/100Mbps RJ45 ports for reliable wired connections.
- Transmisión de largo alcance: Capable of transmitting data over distances up to 3 kilometers (approximately 1.86 miles) with clear line of sight.
- Aplicaciones: Ideal for extending network access to remote buildings like old houses, barns, shops, or garages. Can also be used to share internet with neighbors or for extending surveillance camera networks.
Figure 4.1: CPE450 bridge data rate and port specifications.
Figure 4.2: Visual representation of 3KM long-range transmission capability.
Figure 4.3: Diverse applications for the CPE450 wireless bridges.
4.2. WR3000K WiFi Router Operation
The WR3000K router provides high-speed Wi-Fi connectivity.
- WiFi 6 de doble banda: Supports both 2.4GHz and 5.8GHz bands, offering faster speeds (up to 573.5Mbps on 2.4GHz and 2402Mbps on 5GHz) and improved efficiency for multiple devices.
- 6-Antenna Design: Enhances signal coverage and stability throughout your home or office.
- Puertos Gigabit: Equipped with gigabit Ethernet ports for high-speed wired connections.
5. Mantenimiento
Proper maintenance ensures the longevity and optimal performance of your UeeVii devices.
- CPE450 Wireless Bridges:
- The CPE450 bridges have an Resistente al agua IP65 rating, making them resistant to dust and water jets. However, avoid submerging them in water.
- Periodically inspect the mounting and cable connections for any signs of wear or damage.
- Limpie suavemente el exterior con un paño suave y d.amp cloth to remove dust or dirt. Do not use harsh chemicals.
- WR3000K WiFi Router:
- Mantenga el enrutador en un área bien ventilada para evitar el sobrecalentamiento.
- Dust the router regularly with a soft, dry cloth.
- Ensure cables are securely connected and not kinked.
- Actualizaciones de firmware: Check the official UeeVii website periodically for firmware updates for both the bridges and the router. Firmware updates can improve performance, add features, and fix bugs.
Figure 5.1: CPE450 outdoor wireless bridge highlighting its IP65 waterproof rating.
6. Solución de problemas
Si encuentra problemas, pruebe los siguientes pasos de solución de problemas:
| Problema | Posible causa | Solución |
|---|---|---|
| No internet connection (CPE450) | No clear line of sight; incorrect Master/Slave setup; power issue; cable issue. | Ensure clear line of sight between bridges. Verify Master/Slave configuration. Check power adapters and Ethernet cables. Reboot both bridges. |
| Slow network speed (CPE450) | Interference; poor alignment; distance too great. | Check for sources of interference. Re-align bridges for optimal signal. Ensure distance is within 3KM. |
| No Wi-Fi signal (WR3000K) | Router not powered on; Wi-Fi disabled; incorrect setup. | Verify power connection. Check router's Wi-Fi indicator lights. Ensure Wi-Fi is enabled in router settings. Reboot router. |
| Cannot access router settings | Incorrect IP address; network issue. | Ensure your device is connected to the router's network. Use the correct default gateway IP (usually printed on the router). Try a different browser. |
If problems persist, please contact UeeVii customer support.
7. Especificaciones
7.1. UeeVii CPE450 Wireless Bridge
- Estándar inalámbrico: 5.8 GHz
- Velocidad de datos: Up to 300Mbps (point-to-point)
- Puertos: Dual 10/100Mbps RJ45 ports
- Soporte PoE: LAN1 (non-standard 24V/48V), LAN2 (standard 48V)
- Distancia de transmisión: Up to 3KM (with clear line of sight)
- Clasificación climática: IP65 resistente al agua
7.2. UeeVii WR3000K WiFi Router
- Estándar inalámbrico: Wi-Fi 6 (802.11ax)
- Alzacuello: Doble banda (2.4 GHz y 5.8 GHz)
- 2.4GHz Speed: Hasta 573.5 Mbps
- 5.8GHz Speed: Hasta 2402 Mbps
- Antenas: 6-antenna design
- Puertos: Gigabit Ethernet ports (WAN/LAN)
8. Garantía y soporte
Información de garantía: For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official UeeVii website. The product typically comes with a manufacturer's warranty covering defects in materials and workmanship.
Atención al cliente: If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact UeeVii customer support through their official websitio o la información de contacto proporcionada en el embalaje de su producto.
UeeVii Official Store: Visit UeeVii Official Store on Amazon
