WOLTU EZS71dgr-4 Dining Chair Set Instruction Manual

Introducción

This manual provides detailed instructions for the assembly, safe use, and maintenance of your WOLTU EZS71dgr-4 dining chair set. Please read this manual thoroughly before assembly and use to ensure proper function and safety. This set includes four upholstered dining chairs with golden metal legs, designed for comfort and stability.

Información de seguridad

ADVERTENCIA: El incumplimiento de estas instrucciones de seguridad puede provocar lesiones o daños al producto.

• Asamblea: Ensure all assembly instructions are followed carefully. Incorrect assembly can lead to instability and potential accidents.
• Capacidad de peso: Do not exceed the maximum load capacity of 150 kg (approximately 330 lbs) per chair. Exceeding this limit can compromise the chair's structural integrity and lead to collapse.
• Estabilidad: Always place the chairs on a level surface. On uneven surfaces, adjust the chair's foot pads to maintain optimal stability and prevent wobbling.
• Niños: Keep small parts and packaging materials away from children during assembly to prevent choking hazards. Supervise children when they are near or using the chairs.
• Uso previsto: Use the chairs only for their intended purpose as dining or accent seating. Avoid standing on the chairs, using them as ladders, or for any other unintended purpose.
• Movimiento: When moving the chair, lift it rather than dragging it across the floor to prevent damage to the legs, floor, or the chair's structure.

Contenido del paquete

Your WOLTU EZS71dgr-4 dining chair set includes the following components for each chair. Please verify all components are present before beginning assembly.

• 1x Chair Seat (Upholstered with dark grey velvet)
• 1x Chair Backrest (Upholstered with dark grey velvet)
• 4x Metal Legs (Golden finish)
• 1x Hardware Pack (Includes screws, washers, and an Allen key)
• 4x Adjustable Foot Pads (May be pre-attached to legs or separate)

Note: This product is supplied as a set of 4 chairs. The listed components are per individual chair.

Configuración y montaje

Assembly is designed to be straightforward. Please follow these steps carefully. It is recommended to assemble the chairs on a soft, clean surface (e.g., a carpet or blanket) to prevent scratches to the chair components or your floor.

1. Desempaquetar componentes: Carefully remove all parts from the packaging. Lay them out and compare them with the package contents list to ensure everything is present and undamaged.
2. Fije las patas al asiento: Position the chair seat upside down on your protected surface. Align the top ends of the four metal legs with the pre-drilled holes on the underside of the seat. Insert the screws with washers through the holes and into the legs. Hand-tighten the screws initially; do not fully tighten them yet.
3. Adjuntar respaldo: Align the backrest with the designated attachment points on the seat and the leg frame. Secure it using the remaining screws and washers. Again, hand-tighten only.
4. Ajuste final: Once all components are loosely assembled, carefully turn the chair upright and place it on a level surface. Gently apply pressure to the seat to ensure all parts are properly aligned and the chair is level. Then, using the provided Allen key, fully tighten all screws. Do not overtighten.
5. Ajuste de las almohadillas de los pies: If the chair wobbles after assembly, adjust the individual foot pads on the bottom of each leg by rotating them until the chair is stable and level on your floor.

Operación y uso

Your WOLTU dining chairs are designed for comfortable and stable seating in dining rooms, kitchens, or as accent chairs in other living spaces.

• Posición del asiento: For optimal balance and comfort, sit centrally on the seat. Avoid sitting on the edge of the chair or placing excessive weight on one side.
• Protección del suelo: The adjustable foot pads on the bottom of each leg are designed to protect your floor from scratches and ensure stability. Ensure they are properly adjusted.
• Diseño ergonómico: The chair features an ergonomic design with a curved backrest to provide lumbar, leg, and hip support, enhancing comfort during prolonged use.

Mantenimiento

Proper care and maintenance will extend the life and preserve the appearance of your WOLTU dining chairs.

• Limpieza de tapicería: For general cleaning, gently wipe the velvet upholstery with a soft, damp cloth. For dust, use a soft brush or a vacuum cleaner with an upholstery attachment to maintain the pile direction. Avoid harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the fabric.
• Limpieza de patas de metal: Wipe the golden metal legs with a soft, dry cloth. For smudges, a slightly damp Se puede utilizar un paño, seguido inmediatamente de un paño seco para evitar manchas de agua.
• Derrames: Blot spills immediately with a clean, dry cloth. Do not rub, as this can spread the stain and damage the velvet fibers. For stubborn stains, consult a professional upholstery cleaner.
• Inspección: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary using the provided Allen key.
• Exposición a la luz solar: Avoid prolonged exposure to direct sunlight to prevent fading of the upholstery and potential discoloration of the metal finish.

Solución de problemas

If you encounter any issues with your WOLTU dining chairs, please refer to the following common troubleshooting steps:

• Silla tambaleante: If the chair wobbles after assembly or during use, first ensure all assembly screws are fully tightened. Then, adjust the individual foot pads on the bottom of each leg by rotating them until the chair is stable and level on your floor.
• Tornillos flojos: If screws become loose over time, retighten them using the provided Allen key. Avoid overtightening, which can strip the threads. Regular inspection can prevent this issue.
• Upholstery Stains: Refer to the cleaning instructions in the Maintenance section. For persistent or difficult stains, it is advisable to consult a professional upholstery cleaning service to avoid damaging the velvet fabric.
• Partes dañadas: If any part is damaged or missing upon arrival, do not proceed with assembly. Contact WOLTU customer support immediately for assistance.

Presupuesto

Garantía y soporte

For any questions regarding assembly, missing parts, product defects, or warranty claims, please contact WOLTU customer support. Please retain your proof of purchase for all warranty-related inquiries.

WOLTU Customer Service: Refer to the contact information provided with your purchase or visit the official WOLTU website for support. You can also find more information about WOLTU products at their official store:

Tienda WOLTU en Amazon