Jocca Funny Cooking Crepe Maker - Model 2488T - Instruction Manual

Instrucciones de seguridad importantes

Please read all instructions carefully before using your Jocca Funny Cooking Crepe Maker. Keep this manual for future reference.

• Do not touch hot surfaces. Always use the ergonomic handle.
• Para protegerse contra descargas eléctricas, no sumerja el cable de alimentación, los enchufes ni el aparato en agua ni en ningún otro líquido.
• Es necesaria una estrecha supervisión cuando el aparato sea utilizado por niños o cerca de ellos.
• Unplug the crepe maker from the outlet when not in use and before cleaning. Allow it to cool completely before handling or cleaning.
• Do not operate any appliance with a damaged cord or plug, or if the appliance malfunctions or has been damaged in any manner. Contact customer service for assistance.
• El uso de accesorios no recomendados por el fabricante del aparato puede provocar lesiones.
• No utilice el aparato al aire libre.
• No deje que el cable de alimentación cuelgue del borde de una mesa o mostrador ni que toque superficies calientes.
• No coloque el aparato sobre o cerca de un quemador de gas o eléctrico caliente, ni dentro de un horno caliente.
• Always ensure the appliance is placed on a stable, heat-resistant surface during use.
• Do not use the appliance for purposes other than its intended use (crepe making).

Producto terminadoview

Componentes

• Crepe Maker Unit with Non-Stick Plate
• Mango ergonómico
• Temperature Control Dial (OFF, I, II, III)
• Cable de alimentación
• Separate Dipping Plate/Lid

Imagen: Arriba view of the crepe maker, highlighting its non-stick cooking surface.

Imagen: Abajo view of the crepe maker, illustrating the temperature control dial and stable feet.

Especificaciones técnicas

Configuración

Follow these steps to set up your crepe maker before first use:

1. Deshacer: Retire con cuidado todos los componentes del embalaje. Conserve el embalaje para su almacenamiento o transporte posterior.
2. Limpio: Wipe the non-stick cooking plate and the dipping plate with a damp paño. Asegúrese de que estén secos antes de usarlos.
3. Colocación: Place the crepe maker on a stable, flat, and heat-resistant surface, away from flammable materials. Ensure there is adequate ventilation around the appliance.
4. Conexión de energía: Enchufe el cable de alimentación en un tomacorriente estándar de 230 V.

Instrucciones de funcionamiento

Antes del primer uso

It is recommended to perform an initial burn-off to remove any manufacturing residues:

1. Plug in the crepe maker and turn the temperature dial to setting III (máximo).
2. Allow the appliance to heat for approximately 5-10 minutes. A slight odor or smoke may be present; this is normal.
3. Gire el dial a APAGADO and unplug the unit. Let it cool completely.
4. Wipe the non-stick plate with a clean, damp paño.

Hacer crepes

Follow these steps for optimal crepe preparation:

1. Preparar masa: Mix your favorite crepe batter recipe. Ensure the batter is smooth and free of lumps.
2. Precalentar: Plug in the crepe maker and turn the temperature dial to your desired setting (e.g., II for medium heat, III for higher heat). Allow it to preheat for 3-5 minutes. The indicator light (if present) will signal when ready.
3. Prepare Dipping Plate: Pour a thin layer of crepe batter into the provided separate dipping plate. The depth should be sufficient to coat the crepe maker's surface.
4. Aderezo: Carefully invert the hot crepe maker, dipping its non-stick cooking surface into the batter in the dipping plate. Hold it submerged for 2-3 seconds, ensuring the surface is evenly coated.
5. Cocinar: Lift the crepe maker, allowing any excess batter to drip back into the dipping plate. Immediately place the crepe maker back on its feet. Cook for approximately 1-2 minutes, or until the edges of the crepe begin to lift and the surface is lightly golden.
6. Eliminar: Use a non-metallic spatula to gently loosen the edges and slide the crepe off the cooking surface onto a serving plate.
7. Repetir: Repeat the dipping and cooking process for subsequent crepes. Adjust temperature and dipping time as needed.
8. Finalizar: Once finished, turn the temperature dial to APAGADO and unplug the appliance. Allow it to cool completely before cleaning.

Image: The crepe maker being inverted and dipped into the batter in the accompanying plate.

Image: The crepe maker alongside a stack of finished crepes on the separate plate.

Control de temperatura

Your Jocca Funny Cooking Crepe Maker features a 3-level temperature control dial, allowing you to adjust the heat according to your recipe and preference:

• OFF: Apaga el aparato.
• Yo (Bajo): Suitable for keeping crepes warm or for very delicate cooking.
• II (Medio): Ideal for most standard crepe recipes, providing even cooking and light browning.
• III (Alto): For faster cooking or achieving a crispier texture. Use with caution to prevent burning.

Experiment with different settings to find the perfect temperature for your desired crepe consistency.

Mantenimiento y limpieza

Proper cleaning and maintenance will extend the life of your crepe maker:

1. Enfriarse: Always ensure the crepe maker is unplugged and has cooled completely before attempting to clean it.
2. Placa antiadherente: Limpie la superficie de cocción antiadherente con un paño suave y seco.amp cloth. For any stuck-on food, use a small amount of mild dish soap and then wipe thoroughly with a clean, damp cloth. Do not use abrasive cleaners, metal scouring pads, or sharp utensils, as these can damage the non-stick coating.
3. Exterior: El exterior del aparato se puede limpiar con un pañoamp paño.
4. Dipping Plate: The separate dipping plate can be washed by hand with warm soapy water or placed in the dishwasher.
5. No sumergir: Never immerse the main crepe maker unit (with electrical components) in water or any other liquid.
6. Almacenamiento: Store the clean and dry crepe maker in a cool, dry place.

Solución de problemas

If you encounter any issues with your crepe maker, refer to the following table:

Garantía y soporte

This Jocca product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase.

For warranty claims, technical assistance, or inquiries regarding spare parts, please contact Jocca customer service. You can usually find contact information on the official Jocca websitiowww.jocca.es) o a través del minorista donde compró el producto.

Please retain your original purchase receipt as proof of purchase, as it will be required for any warranty service.

No intente reparar el aparato usted mismo, ya que esto puede anular la garantía y suponer riesgos de seguridad.