Información importante
Please read this manual thoroughly before installation and use. Keep this manual for future reference.
Nota: The toilet and tank are shipped in two separate packages and may not arrive at the same time. Ensure all packages are received before beginning installation.
¿Qué hay en la caja?
Verifique que todos los componentes enumerados a continuación estén presentes y sin daños antes de continuar con la instalación.

Figure 1: Included Components. Box-1 contains the Wall Hung Toilet, Removable Cover & Seat, Cover & Seat Mounting Bolt Kit, Toilet Mounting Bolt Kit, and Installation Instruction. Box-2 contains the Carrier and Tank, Rough-in Box, Pipe Clamp, Toilet Bolt Kit, Silicone Grease, Flush & Drain Pipes, Discharge Elbow, Protection Plugs, Protection Foam, Mounting Stud, Carrier Fixings Kit, and Flush Plate Installation Kit.
- Inodoro suspendido
- Toilet Seat & Cover (Soft-Close)
- In-Wall Toilet Tank Carrier System
- Dual-Flush Plate
- Mounting Hardware (including bolts, nuts, washers, and brackets)
- Manual de instrucciones de instalación
- Caja de montaje
- Tubería Clamp
- Toilet Bolt Kit
- Grasa de silicona
- Flush & Drain Pipes
- Codo de descarga
- Tapones de protección
- Espuma de protección
- Espárragos de montaje
- Carrier Fixings Kit
- Flush Plate Installation Kit
Datos técnicos y dimensiones
Review the technical specifications and dimensions to ensure compatibility with your bathroom space and plumbing.

Figure 2: Technical Data for ERI-WT425. Dimensions include 20 7/8" length, 14 1/2" height, and 10 3/4" width. Please check overall dimensions and rough-in for your location prior to purchase. All dimensions are nominal with a tolerance of up to 2%.

Figure 3: Dimension Guide for ERI-WT425. This diagram provides detailed measurements for the toilet bowl, including length, width, and height from various angles. It is crucial to verify these dimensions against your installation space.
Presupuesto:
| Número de modelo | ERI-WT425 |
| Color | Blanco |
| Material (Inodoro) | Cerámico |
| Material (Asiento) | Polipropileno (PP) |
| Tipo de instalación | Montado en la pared |
| Stud Compatibility | Fits 2x4 Studs |
| Sistema de descarga | Doble descarga (0.8/1.6 GPF) |
| Capacidad del tanque | 2.2 Gallons (Concealed) |
| Maximum Weight Capacity (Frame) | 880 libras |
| Altura ajustable | 0-8 3/4 inches |
Configuración e instalación
Professional installation is recommended. Follow these steps carefully for proper setup.
Guía de video de instalación
Video 1: Wall Hung Toilet Installation Guide. This video provides a visual step-by-step guide for installing the in-wall tank carrier system and the wall-hung toilet bowl.
Key Installation Steps (Refer to video for details)
- Prepara la pared: Mark the desired height and position for the in-wall tank carrier system. Ensure the wall structure (2x4 studs) can support the unit.
- Mount the Carrier Frame: Securely attach the carrier frame to the wall studs and floor using the provided mounting hardware. Adjust the height as needed.

Figure 4: Secure Installation of the In-Wall Carrier. The frame is mounted to the wall using metal brackets and bolted to wall studs, then affixed to the floor.
- Conectar fontanería: Install the water supply line and the discharge pipe to the in-wall tank. Ensure all connections are watertight.
- Install Rough-in Box and Flush Plate Mechanism: Place the rough-in box and connect the flush plate mechanism. Trim the box to match the wall finish.

Figure 5: In-Wall Toilet Tank Carrier System. This diagram highlights features like dual flush, 2.2 GAL tank, 880 lbs capacity stainless steel frame, and adjustable height for 2x4 wall studs.
- Terminar la pared: Cover the in-wall tank and carrier with drywall or tile, leaving access for the flush plate and toilet mounting points.
- Monte la taza del inodoro: Attach the toilet bowl to the mounting studs protruding from the wall. Connect the flush and drain pipes to the bowl.
- Instalar el asiento del inodoro: Secure the soft-close toilet seat and cover to the bowl.
- Install Flush Plate: Attach the dual-flush plate to the rough-in box, connecting it to the flush mechanism.
- Prueba: Perform a flush test to check for leaks and proper operation.
Instrucciones de funcionamiento
The Eridanus Wall Hung Toilet features a dual-flush system for water conservation and a soft-close seat for quiet operation.
- Operación de doble descarga:
- Press the smaller button on the flush plate for a partial flush (0.8 GPF) for liquid waste.
- Press the larger button on the flush plate for a full flush (1.6 GPF) for solid waste.

Figure 6: Powerful Flush System. The rimless bowl design ensures a quick, thorough, and quiet cleanup with a swirling motion.
- Asiento de cierre suave: Gently push the toilet seat or lid down. It will close slowly and quietly without slamming. Avoid forcing the seat down, as this can damage the soft-close mechanism.

Figure 7: Soft-Close Seat. The seat gently closes, preventing slamming and reducing noise in the bathroom.
- Asiento de liberación rápida: For easy cleaning, the seat can be quickly removed. Locate the release buttons or levers near the hinges and press them to detach the seat.

Figure 8: Quick-Release Seat. This feature allows for easy removal of the seat for thorough cleaning.
Mantenimiento
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Eridanus Wall Hung Toilet.
- Limpieza del recipiente: The rimless bowl design facilitates easy cleaning. Use a mild toilet cleaner and a soft brush or cloth. Avoid abrasive cleaners or harsh chemicals that can damage the ceramic surface.

Figure 9: Easy Floor Cleaning. The wall-hung design frees up floor space, allowing for effortless cleaning underneath the toilet.
- Limpieza del asiento: Remove the quick-release seat for thorough cleaning. Use a mild soap and water solution with a soft cloth. Do not use harsh detergents or abrasive pads.
- Flush Plate Maintenance: Wipe the dual-flush plate with a soft, damp cloth. Avoid spraying cleaners directly onto the plate to prevent moisture from entering the mechanism.
- Inspección general: Periodically check for any leaks around the connections. If leaks are detected, tighten connections or consult a professional plumber.
Solución de problemas
Esta sección aborda problemas comunes que podrías encontrar. Si tienes problemas que no aparecen aquí, contacta con atención al cliente.
| Problema | Posible causa | Solución |
|---|---|---|
| El inodoro no descarga o descarga débilmente |
|
|
| Agua corriente continua |
|
|
| Leaks around the toilet base or connections |
|
|
Garantía y soporte
Eridanus se compromete a proporcionar productos de calidad y satisfacción del cliente.
- Servicio posventa de por vida: Eridanus toilets come with lifetime after-sales service.
- Garantía limitada de un año: A one-year limited warranty covers the toilet.
- One-Year Limited Warranty on Soft-Closing Toilet Seat Lid: The soft-closing toilet seat lid is covered by a separate one-year limited warranty.
- Atención al cliente: For any inquiries or support, please contact Eridanus customer service. Messages are typically responded to within 24 hours.

Figure 10: Eridanus Premium Support. This image outlines the support services available, including part replacement, customer assistance, returns, and lifetime service.





