1. Introducción
Thank you for choosing the LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new LED spotlight. Please read these instructions carefully before installation and retain them for future reference.
2. Información de seguridad
- Seguridad eléctrica: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation, maintenance, or repair.
- Volumentage: Este producto funciona a 220 voltios. Verifique que su fuente de alimentación cumpla con este requisito.
- Clasificación IP65: The spotlight is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. It is suitable for outdoor use but should not be submerged in water.
- Calor: Do not cover the spotlight during operation, as this may cause overheating.
- No regulable: This LED spotlight is non-dimmable. Do not connect it to a dimmer switch.
- Fuente de luz: The LED light source is not replaceable. If the light source fails, the entire luminaire must be replaced.
3. Contenido del paquete
Revise el paquete para asegurarse de que todos los componentes estén presentes:
- LEDVANCE 17W 2400LM LED Spotlight unit
- Soporte de montaje
- Screws and wall anchors (may vary by region)
- Manual de instrucciones
4. Configuración e instalación
Siga estos pasos para una correcta instalación:
4.1 Preinstalación
- Apagado: Asegúrese de que el suministro de energía principal al área de instalación esté apagado en el disyuntor.
- Selección de ubicación: Choose a suitable outdoor location for the spotlight. Consider the desired coverage area for the light and the effective range of the motion and light sensors. Ensure the mounting surface is sturdy enough to support the fixture.
- Verificación de dimensiones: Refer to the product dimensions to ensure adequate space for installation.
This diagram illustrates the physical dimensions of the LEDVANCE LED Spotlight. The front view muestra un ancho de 157 mm y el lateral view shows a height of 183 mm and a depth of 56.5 mm, providing crucial measurements for installation planning.
4.2 Montaje
- Position the mounting bracket on the desired surface and mark the drilling points.
- Perfore agujeros en las posiciones marcadas e inserte anclajes de pared si es necesario.
- Fije el soporte de montaje a la superficie utilizando los tornillos proporcionados.
- Attach the LED spotlight unit to the mounting bracket, ensuring it is firmly secured. Adjust the angle of the spotlight as needed.
4.3 Cableado
- Connect the spotlight's electrical wires to your mains power supply (220V). Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations.
- Properly insulate all connections to prevent short circuits and ensure safety.
- Una vez que el cableado esté completo y seguro, restablezca la energía al circuito.
This image displays the product packaging for the LEDVANCE Floodlight Sensor, highlighting key features such as 17W power, 2400 lumens, IP65 rating, 5-year guarantee, 4000K color temperature, and motion/light sensor capabilities. It also shows the product's model number and various certifications.
5. Instrucciones de funcionamiento
The LEDVANCE spotlight is designed for automatic operation based on its integrated motion and light sensors.
- Light Sensor (Dusk-to-Dawn): The integrated light sensor detects ambient light levels. The spotlight will automatically activate when the ambient light falls below a certain threshold (e.g., at dusk) and deactivate when sufficient light is present (e.g., at dawn).
- Sensor de movimiento: The motion sensor detects movement within its detection range. When motion is detected, the spotlight will illuminate for a set duration. After the motion ceases and the set time expires, the light will turn off, provided the ambient light level is above the threshold set by the light sensor.
- Ajustes: While specific adjustment controls are not detailed, some models may feature adjustable settings for motion sensitivity, light threshold, and illumination duration. Refer to any labels on the fixture itself for potential adjustment dials.
6. Mantenimiento
The LEDVANCE spotlight requires minimal maintenance.
- Limpieza: Periodically clean the surface of the spotlight and the sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the sensor.
- Inspección: Inspeccione regularmente la luminaria para detectar cualquier signo de daño, cableado suelto o corrosión. Solucione cualquier problema de inmediato.
- No hay piezas que el usuario pueda reparar: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the unit yourself.
7. Solución de problemas
If you encounter issues with your LEDVANCE spotlight, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | No hay suministro de energía. Luz ambiental demasiado alta. Motion sensor not triggered. | Verifique el disyuntor y el cableado. Wait for dusk or test in a darker environment. Ensure motion is within sensor range. |
| La luz permanece encendida continuamente. | Movimiento constante detectado. Mal funcionamiento del sensor de luz. Error de cableado. | Check for obstructions or continuous movement in sensor's field of view. Contact support if sensor is faulty. Verificar las conexiones del cableado. |
| La luz parpadea. | Suministro de energía inestable. Conexión de cableado suelta. | Consulte a un electricista para comprobar la estabilidad del suministro eléctrico. Asegúrese de que todas las conexiones del cableado estén seguras (con la energía apagada). |
| El sensor de movimiento no detecta. | Sensor obstruido. Ángulo del sensor incorrecto. Temperature too high/low for sensor. | Elimine cualquier obstrucción de la lente del sensor. Adjust the sensor's angle for optimal coverage. Ensure operating within specified temperature range. |
8. Especificaciones
| Marca | VANCE CONJUNTO |
| Número de modelo | 4099854309502 |
| Quétage | 17 vatios |
| Salida de lúmenes | 2400 lúmenes |
| Temperatura de color | 4000K (blanco frío) |
| Ángulo del haz | 100 grados |
| Volumentage | 220 voltios |
| Clasificación IP | IP65 |
| Material | Aluminio |
| Dimensiones (L x An x Al) | 15.7 x 3.8 x 18.3 cm |
| Peso del artículo | 576 gramos |
| Regulable | No |
| Sensores | Sensor de movimiento, Sensor de luz |
9. Garantía y soporte
This LEDVANCE spotlight comes with a 5 año de garantía a partir de la fecha de compra. Esta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso.
For warranty claims, technical support, or any questions not covered in this manual, please contact your retailer or the LEDVANCE customer service directly. Keep your proof of purchase for warranty validation.
