1. Introducción
Thank you for choosing the AUTOWIKI Roof Rack Assembly. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new roof rack. Designed specifically for the 2024 and 2025 Tesla Cybertruck, this modular 3-piece system enhances your vehicle's cargo capacity without requiring drilling or cutting.
Lea este manual detenidamente antes de la instalación y el uso para garantizar un rendimiento óptimo y seguro.
Image 1.1: AUTOWIKI Roof Rack Assembly on a Tesla Cybertruck and individual components.
2. Información de seguridad
Su seguridad y la de los demás son primordiales. Siga siempre las siguientes pautas de seguridad:
- Capacidad de peso: Do not exceed the maximum load capacity specified for your vehicle's roof or the roof rack. Consult your Tesla Cybertruck owner's manual for specific roof load limits.
- Carga segura: Always ensure all cargo is securely fastened to the roof rack using appropriate tie-downs. Loose cargo can shift during transit, causing damage or injury.
- Controles periódicos: Periodically check all mounting hardware and fasteners to ensure they remain tight, especially after driving on rough terrain or after the first few uses.
- Liquidación del vehículo: Be aware of the increased height of your vehicle when the roof rack is installed, especially when entering garages, car washes, or low-clearance areas.
- Hábitos de conducción: Adjust your driving speed and habits when carrying cargo on the roof rack. High speeds, sudden braking, or sharp turns can affect vehicle stability.
- Instalación: Follow all installation instructions carefully. Improper installation can lead to product failure and potential hazards.
3. Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- 2 x AUTOWIKI Roof Rack Cross Bars (Modular 3-piece design)
- All necessary mounting tools and hardware kits
Image 3.1: Included Roof Rack Cross Bars.
4. Instrucciones de instalación
The AUTOWIKI Roof Rack is designed for straightforward installation onto your Tesla Cybertruck's OEM mounting points without the need for drilling or cutting.
4.1. Lista de verificación previa a la instalación
- Asegúrese de que su vehículo esté estacionado en una superficie nivelada y que el freno de estacionamiento esté activado.
- Gather all tools provided and verify all components are present.
- Clean the roof area where the rack will be mounted to ensure a secure fit.
4.2. Instalación paso a paso
- Identificar los puntos de montaje: Locate the OEM Tesla mounting points on your Cybertruck's roof. These are specifically designed for accessory attachment.
- Assemble Cross Bars (if necessary): The roof rack features a modular 3-piece design. If not pre-assembled, connect the sections of each cross bar as indicated in the diagram, ensuring all fasteners are snug.
- Colocar el rack: Carefully place the assembled roof rack rails onto the designated OEM mounting points.
- Soportes de montaje seguros: Attach the mounting brackets to the vehicle's OEM mounting points using the provided hardware. Ensure the bolts are aligned correctly.
- Apretar los sujetadores: Gradually tighten all bolts and fasteners, working in a cross-pattern if applicable, to ensure even pressure. Do not overtighten.
- Comprobación final: After tightening, gently shake the roof rack to confirm it is securely attached and stable. Re-check all fasteners after the first drive.
Image 4.1: Installation to OEM Tesla Mounting Points.
Image 4.2: Modular 3-Piece Design for Adjustment.
4.3. Important Considerations (Based on User Feedback)
- Mounting Bracket Washers: Some installations may benefit from using large flat washers between existing bolts and new brackets if the new brackets are thinner than original components, to ensure proper tightening.
- Frunk Button Panel: Be aware that removal of the factory bumper (if applicable for other accessories) might affect the lower clips of the frunk button panel. A thin foam strip or similar material may be needed to help the panel sit snugly.
- Front Camera Washer: If your vehicle has a spray washer for the front camera, the new bracket and bumper design may not accommodate it.
- Wheel Well Liners: Depending on other modifications or accessories, trimming approximately 2.5-3 inches of the front wheel well liners might be necessary if the new components do not extend as low or far back as OEM parts.
Image 4.3: Installation Effect - Before and After.
5. Operación
Once installed, your AUTOWIKI Roof Rack provides additional cargo space for your Tesla Cybertruck. Follow these guidelines for safe operation:
- Carga de mercancía: Distribute weight evenly across the roof rack. Place heavier items at the bottom and center of the rack.
- Aseguramiento de la carga: Always use appropriate straps, nets, or other securing devices to prevent cargo from shifting or falling off during transit. Ensure straps are tight and checked periodically during long journeys.
- Aerodinámica: Large or irregularly shaped items can affect your vehicle's aerodynamics and fuel efficiency. Consider using cargo bags or boxes to streamline loads.
- Ruido: Some wind noise may be experienced, especially with certain types of cargo or at higher speeds.
6. Mantenimiento
Regular maintenance will prolong the life and ensure the safe operation of your roof rack.
- Limpieza: Clean the roof rack regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the powder-coated finish.
- Inspección: Periodically inspect all components for signs of wear, damage, or corrosion. Check bolts and fasteners for tightness.
- Almacenamiento: If removing the roof rack for extended periods, store it in a dry place away from direct sunlight and extreme temperatures.
7. Solución de problemas
If you encounter issues with your AUTOWIKI Roof Rack, consider the following:
- Componentes sueltos: If the rack feels loose, re-check all mounting bolts and fasteners for proper tightness. Refer to the installation section.
- Ruido excesivo: Wind noise can sometimes be reduced by adjusting the position of the cross bars or by ensuring all cargo is securely fastened and streamlined.
- Problemas de ajuste: Double-check that the roof rack is correctly aligned with the OEM mounting points. Ensure no debris is obstructing the fit.
- Partes faltantes: If any parts were missing upon delivery, contact AUTOWIKI customer support immediately.
8. Especificaciones
Key specifications for the AUTOWIKI Roof Rack Assembly:
| Característica | Detalle |
|---|---|
| Marca | AUTOWIKI |
| Número de modelo | ASM-NCT01F101 |
| Peso del artículo | 43 libras |
| Material | Heavy-duty Steel Q235A |
| Acabado exterior | Texture Powder Coated, Carbon Steel Coating, Electro-galvanized E-coating |
| Color | Negro |
| Tipo de montaje | U-Bolt (Bolt-On to OEM points) |
| Tipo de ajuste automotriz | Vehicle Specific Fit (2024-2025 Tesla Cybertruck) |
Image 8.1: Deluxe Materials and Coatings.
9. Garantía y soporte
AUTOWIKI provides a manufacturer warranty for 12 months from the date of purchase for this roof rack assembly.
If you encounter any problems or have questions regarding your product, please contact AUTOWIKI customer support. We aim to provide a friendly reply within 24 hours.
For the most up-to-date contact information, please refer to the official AUTOWIKI websitio web o su documentación de compra.
