Manual de reemplazo del motor del actuador Richmat HJA67S

Introducción

This manual provides essential information for the installation, operation, and maintenance of your Richmat HJA67S Actuator Motor. This motor is designed as a replacement part for adjustable bed bases, specifically compatible with models that utilize the HJA67S actuator with a 4-pin head configuration. Please read this manual thoroughly before proceeding with installation to ensure proper function and safety.

Información de seguridad

Desconectar la energía: Always ensure the adjustable bed base is unplugged from the power outlet before attempting any installation, removal, or maintenance.
Instalación profesional recomendada: If you are unsure about any steps, consult a qualified technician.
Comprobación de compatibilidad: Verify that the replacement motor's model number (HJA67S) and pin configuration (4-pin head) precisely match your existing motor. Incompatibility can lead to malfunction or damage.
Tratar con cuidado: Avoid dropping or subjecting the motor to excessive force, which can damage internal components.
Mantener seco: This motor is not waterproof. Avoid exposure to liquids or excessive moisture.

¿Qué hay en la caja?

Richmat HJA67S Actuator Motor (4 Pin Head)

Configuración e instalación

Follow these steps carefully to replace your adjustable bed's actuator motor.

Preparar la cama: Unplug the adjustable bed from the wall outlet. Position the bed to allow easy access to the motor.
Identify the Existing Motor: Locate the actuator motor on your adjustable bed base. Note its position and how it connects to the bed frame.
Verificar compatibilidad: Before proceeding, carefully check the label on your existing motor to confirm it is a Richmat HJA67S model and has a 4-pin connector.
Image: Close-up of the Richmat HJA67S motor label. Verify the model number and specifications match your existing unit.
Image: Detail of the 4-pin connector. Ensure your bed's wiring harness is compatible with this connector type.
Disconnect the Old Motor:
- Carefully disconnect the power cable from the old motor.
- Unbolt or unclip the motor from its mounting points on the bed frame. There are typically pins or bolts at both ends of the actuator.
- Retire el motor viejo.
Instalar el nuevo motor:
- Position the new Richmat HJA67S actuator motor in the same location as the old one.
- Securely attach the motor to the bed frame using the existing bolts or clips. Ensure it is firmly in place and aligned correctly.
- Connect the 4-pin power cable from the bed's wiring harness to the new motor's connector. Ensure a snug fit.
Image: The Richmat HJA67S actuator motor. Ensure proper orientation and secure mounting during installation.
Funcionalidad de prueba: Once the motor is securely installed and connected, plug the adjustable bed back into the power outlet. Use the bed's remote control to test the motor's movement in both directions (head and foot, if applicable).

Instrucciones de funcionamiento

The Richmat HJA67S actuator motor operates as an integral part of your adjustable bed base. Its function is controlled directly by the bed's remote control or integrated control panel. There are no direct user controls on the motor itself.

Use your adjustable bed's remote control to raise or lower the head and/or foot sections of the bed.
The motor will activate to move the bed frame to the desired position.
Avoid placing excessive weight on the moving parts of the bed, which could strain the motor.

Mantenimiento

Limpieza: Periodically wipe the exterior of the motor with a dry, soft cloth to remove dust. Do not use liquid cleaners or abrasive materials.
Inspección: Regularly inspect the motor and its connections for any signs of wear, damage, or loose cables. Ensure all mounting bolts remain tight.
Lubricación: El motor viene lubricado de fábrica y generalmente no requiere lubricación adicional. Si nota ruidos inusuales, consulte a un profesional.

Solución de problemas

Problema	Posible causa	Solución
Motor does not move.	Bed not plugged in. Loose power cable connection to motor. Remote control battery low or faulty. Protección de sobrecarga del motor activada. Incorrect motor installed (e.g., 8-pin instead of 4-pin).	Ensure bed is securely plugged into a working outlet. Check and re-secure the 4-pin connector to the motor. Replace remote control batteries or check remote functionality. Unplug the bed for 5 minutes to reset, then try again. Verify the installed motor is indeed the 4-pin HJA67S model.
El motor hace un ruido inusual.	Obstruction in bed mechanism. Motor mounting loose. Problema con el motor interno.	Inspect bed for any obstructions preventing smooth movement. Tighten all motor mounting bolts. Si el ruido persiste, comuníquese con el servicio de atención al cliente.

If troubleshooting steps do not resolve the issue, please contact the seller or manufacturer for further assistance.

Presupuesto

Característica	Detalle
Número de modelo	HJA67S
Marca	ricomat
Tipo de conector	4 Pin Head
Material	Plástico
Fabricante	ricomat
ASIN	B0DYLXKJTT

Nota: las especificaciones están sujetas a cambios sin previo aviso.

Garantía y soporte

For information regarding warranty coverage, please refer to the terms provided by your original seller or contact Richmat directly. Keep your purchase receipt as proof of purchase.

For technical support or assistance with installation and troubleshooting, please contact the seller from whom you purchased this product. They can provide specific guidance and support related to your purchase.

Contacto del vendedor: Irvine Home Collection USA (as per product data)

Fabricante: ricomat

	Base ajustable plegable modelo H - Manual del propietario del control remoto inalámbrico Manual del propietario completo del modelo H Base ajustable plegable con control remoto inalámbrico, que detalla la instalación, el funcionamiento, las pautas de seguridad, la resolución de problemas y las funciones avanzadas como la conectividad Bluetooth y las posiciones programables.
	Model P Folding Adjustable Base - Wireless Remote Owner's Manual Comprehensive owner's manual for the Model P Folding Adjustable Base with Wireless Remote, covering installation, operation, features, troubleshooting, and safety warnings.
	Sistema de hogar inteligente Richmat HJH159 Ble: Manual de funciones del producto Guía completa del sistema de cama ajustable Richmat HJH159 Ble para hogares inteligentes, que detalla las funciones del control remoto, la configuración del sistema, la lista de componentes, el emparejamiento y las instrucciones de funcionamiento. Incluye información sobre el cumplimiento de la FCC.
	Manual del usuario del teléfono Richmat HJH124 Ble Manual de usuario del teléfono Richmat HJH124 Ble, que detalla sus funciones, operación de botones y especificaciones técnicas.
	Manual de funciones del producto Richmat HJH158 Ble Smart Home Manual de usuario para el dispositivo doméstico inteligente Richmat HJH158 Ble, que detalla las funciones de control remoto, la configuración del sistema y la información de cumplimiento de la FCC.
	Manual del usuario del sistema Richmat Z102490010: funcionamiento, características y seguridad Guía de usuario detallada del sistema de cama ajustable Richmat Z102490010. Abarca las definiciones de interfaz, la configuración del sistema, la lista de productos, las funciones convencionales, el funcionamiento del control remoto, las precauciones de seguridad y el cumplimiento de la FCC.

Richmat HJA67S

HJA67S Actuator Motor Replacement for Adjustable Bed Base (4 Pin Head)