1. Introducción
This manual provides essential information for the proper installation, operation, and maintenance of your Traxxas TQi 2.4GHz 5-channel micro receiver with telemetry and Traxxas Stability Management (TSM). Please read this manual thoroughly before using the product to ensure safe and optimal performance.
2. Producto terminadoview
The Traxxas TQi 2.4GHz 5-channel micro receiver (Part #6533X) is designed for use with Traxxas TQi transmitters. It features integrated telemetry capabilities and Traxxas Stability Management (TSM) for enhanced control and real-time data monitoring.
Características principales:
- Traxxas TQi 2.4GHz 5-channel Micro Receiver with Telemetry & TSM
- Part number(s) included (in factory packaging): 6533X
¿Qué hay en la caja?
- One Traxxas TQi 2.4GHz 5-channel Micro Receiver with Telemetry & TSM (Part #6533X)
Descripción de la imagen: Un de arriba hacia abajo view of the Traxxas TQi 2.4GHz 5-Channel Micro Receiver, model 6533X. The receiver is black with red and white branding. Key labels visible include "TRAXXASLINK", "TSM", "2.4GHz Receiver", "TQi", "Part #6533X", "LINK" button, "6V 50mA" power specification, "CE" mark, and "Made in Taiwan KA24078-R00". On the right side, there are multiple ports labeled V/T, RPM, BATT/CH5, CH4, CH3, CH2, CH1, indicating various channel and telemetry connections.
3. Configuración e instalación
3.1 Colocación del receptor
Mount the receiver in a location that protects it from moisture, dirt, and physical impact. Ensure it is securely fastened using double-sided tape or a receiver box. Avoid placing it near high-current wires or motors that could cause interference.
3.2 conexiones de cableado
- CH1 (Dirección): Connect the steering servo to this port.
- CH2 (Acelerador): Connect the electronic speed control (ESC) to this port.
- CH3, CH4: Connect auxiliary servos or accessories as needed.
- BATT/CH5: This port can be used for battery input (if not powered by ESC) or for a fifth channel.
- RPM: Connect an RPM telemetry sensor (sold separately).
- V/T: Conecte un voltage or temperature telemetry sensor (sold separately).
3.3 Vinculación del receptor
- Ensure your TQi transmitter is powered off.
- Connect a fully charged battery to your model and power on the electronic speed control (ESC) or receiver battery pack. The receiver's LED will flash red.
- Mantenga presionado el botón LINK en el receptor.
- While holding the LINK button, turn on your TQi transmitter.
- Release the LINK button on the receiver when the transmitter's LED begins to flash green.
- The receiver's LED will turn solid green, indicating a successful bind.
- Test all functions (steering, throttle, auxiliary channels) to confirm proper operation.
4. Instrucciones de funcionamiento
4.1 Funcionamiento básico
Once bound, the receiver will communicate wirelessly with your TQi transmitter. Ensure the transmitter is always powered on before the model and powered off after the model to maintain control.
4.2 Funciones de telemetría
The TQi receiver supports telemetry, allowing you to monitor real-time data from your model (e.g., speed, battery voltage, temperature) when connected to compatible Traxxas telemetry sensors (sold separately). Data can be viewed on your TQi transmitter with a Traxxas Link Wireless Module and the Traxxas Link App on a compatible mobile device.
4.3 Gestión de estabilidad Traxxas (TSM)
TSM assists in maintaining control of your vehicle, especially on slippery surfaces, by making steering corrections. The level of TSM assistance can typically be adjusted via your TQi transmitter or the Traxxas Link App.
5. Mantenimiento
- Limpieza: Keep the receiver clean and free from dirt, dust, and moisture. Use a soft, dry brush or compressed air to remove debris. Do not use solvents or harsh chemicals.
- Inspección: Regularly inspect all wiring and connections for signs of wear, damage, or corrosion. Ensure all plugs are securely seated.
- Almacenamiento: Guarde el receptor en un entorno seco y fresco, alejado de la luz solar directa y de temperaturas extremas.
6. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Sin control/Sin señal | Receiver not bound; Transmitter off; Low battery; Interference. | Re-bind receiver; Ensure transmitter is on; Check battery levels; Move away from interference sources. |
| Intermittent control/Short range | Antenna obstructed/damaged; Interference; Low battery. | Ensure antenna is clear and undamaged; Check for local interference; Replace/recharge batteries. |
| Telemetry data not displayed | Sensors not connected; Traxxas Link module not installed/paired; App issue. | Verify sensor connections; Ensure Traxxas Link Wireless Module is correctly installed and paired; Check Traxxas Link App settings. |
7. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | 6533X |
| Frecuencia | 2.4 GHz |
| Canales | 5 |
| Características | Telemetry, Traxxas Stability Management (TSM) |
| Vol de entradatage | 6V (as indicated on unit) |
| Consumo de corriente | 50mA (as indicated on unit) |
| Dimensiones del producto | 6.7 x 3 x 0.65 pulgadas |
| Peso del artículo | 0.317 onzas |
| Fabricante | Traxxas |
| Origen | Hecho en Taiwán |
8. Garantía y soporte
For warranty information, technical support, or service inquiries, please contact Traxxas directly through their official webSitio web o centros de servicio autorizados. Conserve su comprobante de compra para reclamaciones de garantía.
Traxxas Oficial Websitio: traxxas.com
