Introducción
This manual provides comprehensive instructions for the installation, operation, and maintenance of the AXA Model 7508 Door Closer with Slide Arm. Designed for various applications including communal housing, schools, offices, commercial spaces, and hospitality, this door closer ensures reliable and automatic door closing. It complies with European Standard EN 1154 and accessibility standard NEN 1814, making it suitable for areas frequented by individuals with disabilities and children. It is also tested and approved for fire doors according to EN 1634.
The AXA Model 7508 helps prevent heat loss and drafts, contributing to energy efficiency.
Contenido del paquete
Antes de comenzar la instalación, verifique que todos los componentes estén presentes:
- 1x AXA Model 7508 Door Closer unit
- Hardware de montaje (tornillos, anclajes, etc.)
- Installation template (A3 size)
- Manual de instrucciones
Figura 1: Package contents, including the door closer, mounting materials, and the installation manual.
Configuración e instalación
The AXA Model 7508 door closer is designed for surface mounting. A detailed A3-sized installation template is included to facilitate correct positioning and drilling.
- Preparación: Ensure the door and frame are clean and free from obstructions. Determine the desired mounting position (push side or pull side, standard or parallel arm installation). Refer to the included A3 installation template for specific measurements and drilling points.
- Calificación: Use the provided A3 template to accurately mark the drilling points on the door and door frame.
- Perforación: Drill pilot holes at the marked positions according to the template's specifications.
- Montaje del cuerpo del cierrapuertas: Secure the main door closer body to the door or frame using the supplied mounting hardware. Ensure it is firmly attached and level.
- Attaching the Slide Arm: Attach the slide arm to the door closer body and the slide channel to the door frame. Ensure all connections are secure.
- Ajuste inicial: After installation, perform an initial check of the door's closing function. Fine-tune the closing speed and end stroke as described in the "Operating" section.
Figura 2: The AXA Model 7508 Door Closer correctly installed on a door frame.
Figura 3: Example of the AXA Model 7508 Door Closer installed on a contemporary door.
Operación y ajustes
The AXA Model 7508 offers adjustable closing speed, end stroke, opening damping, and closing delay to suit various door types and user preferences.
Figura 4: Key adjustable features of the door closer.
Figura 5: Detallado view of adjustable parameters and their effects on door movement.
- Velocidad de cierre ajustable: This setting controls how quickly the door closes from its fully open position until it reaches the final closing phase. Use a hex key or screwdriver (depending on the model) to turn the adjustment valve. Turning clockwise typically decreases speed (slower close), while counter-clockwise increases speed (faster close).
- Adjustable End Stroke (Latching Speed): This controls the speed of the door during the last few degrees of closing, ensuring it latches securely without slamming. Adjust this independently from the main closing speed.
- Adjustable Opening Damping (Backcheck): If present, this feature provides resistance when the door is opened forcefully beyond a certain point, preventing damage to the door or wall.
- Adjustable Closing Delay: If present, this feature holds the door open for a set period before it begins to close, useful for high-traffic areas or for allowing passage of equipment.
Always make small adjustments and test the door's operation after each change to achieve the desired closing behavior.
Mantenimiento
The AXA Model 7508 Door Closer is designed for durability and requires minimal maintenance. Regular checks can ensure optimal performance and longevity.
- Limpieza: Periodically wipe the door closer body and slide arm with a soft, damp Paño para eliminar el polvo y la suciedad. Evite los limpiadores abrasivos.
- Comprobación del sujetador: Annually inspect all mounting screws and fasteners to ensure they are tight. Re-tighten if necessary.
- Verificación de funcionalidad: Test the door closer's operation periodically to ensure the closing speed and end stroke remain as desired. Readjust if needed.
- Lubricación: Los mecanismos internos vienen lubricados de fábrica y, por lo general, no requieren lubricación adicional. Si se producen ruidos inusuales o rigidez, consulte a un profesional.
Solución de problemas
If you encounter issues with your AXA Model 7508 Door Closer, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La puerta se cierra de golpe | Closing speed or end stroke set too fast. | Adjust the closing speed and/or end stroke valves to a slower setting (turn clockwise). |
| Door closes too slowly | Closing speed set too slow. | Adjust the closing speed valve to a faster setting (turn counter-clockwise). |
| La puerta no cierra completamente | End stroke not strong enough; door obstruction; incorrect installation. | Increase the end stroke force. Check for physical obstructions. Verify installation according to the template. |
| La puerta es difícil de abrir | Opening damping (backcheck) set too high (if applicable). | Reduce the opening dampajuste de configuración. |
| Fuga de aceite | Damaged seal or unit. | Contact customer support for assistance. Do not attempt to repair internally. |
If the problem persists after attempting these solutions, please contact AXA customer support.
Presupuesto
Detailed technical specifications for the AXA Model 7508 Door Closer:
- Número de modelo: 7508
- Número de pieza: 750813564
- Marca: AXA (Allegion Netherlands B.V.)
- Color: Negro
- Material: Hierro fundido
- Dimensiones del producto (L x An x Al): 24 x 5.2 x 6 cm (9.45 x 2.05 x 2.36 pulgadas)
- Peso del artículo: 2.27 kg (2270 gramos)
- Peso máximo de la puerta: Hasta 60 kg
- Tipo de instalación: Montaje en superficie
- Componentes incluidos: Door closer unit, mounting hardware
- Cumplimiento: EN 1154, NEN 1814, EN 1634 (for fire doors)
- Aplicaciones recomendadas: Communal housing, schools, offices, commercial spaces, hospitality, suitable for areas with individuals with disabilities and children, fire doors.
Figura 6: Technical dimensions of the AXA Model 7508 Door Closer.
Garantía y soporte
For warranty information or technical support regarding your AXA Model 7508 Door Closer, please contact Allegion Netherlands B.V. (AXA Home Security) directly. Refer to the product packaging or the official AXA webSitio para obtener los datos de contacto más actualizados.
Fabricante: Allegion Netherlands B.V. (AXA Home Security)
Para obtener más ayuda, puede visitar el AXA Store on Amazon.
