1. Introducción
Thank you for choosing the VECYS LYCZ628-B 3-in-1 Bottom Loading Ice Maker Water Dispenser. This innovative appliance combines the functions of providing cold water, hot water, and ice, operating simultaneously to meet your diverse hydration and cooling needs. Designed for convenience and safety, this manual provides essential information for proper setup, operation, and maintenance to ensure optimal performance and longevity of your unit.
Figura 1: Sobreview of the VECYS 3-in-1 Water Dispenser's capabilities.
2. Información de seguridad
Lea atentamente todas las instrucciones de seguridad antes de utilizar el aparato. El incumplimiento de estas instrucciones podría provocar una descarga eléctrica, un incendio o lesiones graves.
- Conecte siempre la unidad a una toma eléctrica con conexión a tierra.
- No sumerja el aparato, el cable o el enchufe en agua u otros líquidos.
- Keep children away from the hot water dispenser. The unit features a child safety lock for hot water dispensing.
- Asegúrese de que haya una ventilación adecuada alrededor de la unidad. No bloquee ninguna abertura de ventilación.
- Desenchufe el aparato antes de limpiarlo o realizar cualquier mantenimiento.
- No utilice el aparato si el cable de alimentación o el enchufe están dañados.
- Este aparato es solo para uso en interiores.
Figure 2: The anti-scald safety lock feature helps prevent accidental hot water dispensing by children.
3. Producto terminadoview
The VECYS LYCZ628-B is a sophisticated bottom-loading water dispenser with integrated ice making capabilities. Key components include:
- Panel de control: Intuitive touch controls for hot water, fresh water, cold water, child lock, lack of water indicator, ON/OFF, ice making, ice volume, and energy saving modes.
- Dispensing Area: Separate outlets for water and ice, with an LED light for illumination.
- Bandeja de goteo: Desmontable para facilitar la limpieza.
- Compartimento de carga inferior: Houses the water bottle and features a durable 304 stainless steel water pipe.
- Fábrica de hielo: Produce cubitos de hielo en forma de bala.
- Compresor de alto rendimiento: Ensures efficient cooling and ice production.
Figura 3: Frente view of the VECYS water dispenser, highlighting its sleek design.
4. Configuración
Follow these steps to set up your VECYS water dispenser:
- Desembalaje: Retire con cuidado el aparato de su embalaje. Inspeccione si presenta daños durante el envío.
- Colocación: Place the unit on a flat, stable surface, away from direct sunlight and heat sources. Ensure adequate clearance around the unit for ventilation.
- Instalación de la botella de agua:
- Open the bottom loading compartment door.
- Insert the water pipe into a 3 or 5-gallon water bottle. The water pipe is made of 304 stainless steel for durability and hygiene.
- Deslice la botella de agua en el compartimiento y cierre la puerta de forma segura.
- Conexión de energía: Enchufe el cable de alimentación a una toma eléctrica con conexión a tierra.
- Cebado inicial: Before dispensing, allow the unit to fill its internal tanks. This may take a few minutes. Dispense a cup of cold water to ensure the system is primed and air is purged.
Video 1: Demonstrates the bottom loading water bottle installation and initial operation of the VECYS 3-in-1 water dispenser, including ice making and water dispensing.
5. Instrucciones de funcionamiento
Your VECYS dispenser offers hot, cold, and room temperature water, along with ice production.
5.1 Dispensación de agua
- Agua fría: Press the "Cold water" button on the control panel. The water outlet has an LED light for visibility.
- Fresh Water (Room Temperature): Press the "Fresh water" button on the control panel.
- Agua caliente: For safety, hot water dispensing requires a two-step process. First, press the "Child lock" button, then press the "Hot water" button to dispense.
Figure 4: Dispensing options for hot, cold, and fresh water, along with ice.
5.2 Función de fabricación de hielo
To activate the ice making function, press the "Making ice" button on the control panel. The unit can produce up to 22 lbs of bullet-shaped ice daily, with each cycle yielding 9 pieces in approximately 6-8 minutes.
- Dispensación de hielo: Place your cup against the ice dispensing panel to activate the ice chute.
- Ice Volume Indicator: The "Ice volume" indicator lights on the panel show the current ice level.
Figure 5: Details on the ice making speed and capacity.
5.3 Modo de ahorro de energía
The unit features an "ECO" energy-saving mode. Press the "Energy saving" button to activate this mode, which optimizes power consumption.
6. Mantenimiento
Regular maintenance ensures the longevity and hygiene of your VECYS water dispenser.
- Función de autolimpieza: The built-in self-clean function simplifies the cleaning process. Refer to the control panel for activation.
- Bandeja de goteo: Vacíe y limpie periódicamente la bandeja de goteo para evitar desbordamientos y el crecimiento de bacterias.
- Limpieza exterior: Limpie el exterior con un paño suave y seco.amp paño. Evite los limpiadores abrasivos.
- Limpieza Interna: For thorough internal cleaning and disinfection, consider using specialized cleaning capsules designed for water dispensers.
7. Solución de problemas
If you encounter issues with your VECYS water dispenser, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| No ice or cold water production. | Insufficient water in the bottle, unit not powered on, or internal malfunction. | Ensure water bottle is full and properly installed. Check power connection. If problem persists, contact customer support. |
| Cold water button unresponsive or continuous dispensing. | Sensor issue or temporary glitch. | Unplug the machine for 30 seconds, then plug it back in to reset. If the issue continues, contact customer support. |
| El agua tiene un sabor plástico. | New unit residue or insufficient initial flushing. | Flush the system multiple times by dispensing and discarding several gallons of water. Perform a thorough internal cleaning. |
| "Lack of water" light is on, but bottle is full. | Water pipe not properly inserted or sensor issue. | Re-insert the water pipe firmly into the bottle. Ensure the bottle is correctly seated in the compartment. |
8. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | LYCZ628-B |
| Dimensiones del producto (Pr. x An. x Al.) | 17.7" de profundidad x 14.4" de ancho x 44.1" de alto |
| Water Refrigeration Capacity | 2L (0.53 Gallon)/Hr |
| Capacidad del tanque de agua | 1.5L (0.4 galones) |
| Rango de temperatura del agua | 42°F - 212°F |
| Capacidad de fabricación de hielo | 22LBS/24Hrs |
| Hora de hacer hielo | 6-8 mins per cycle |
| Almacenamiento de hielo | 1.1 LIBRAS |
| Tamaños de botellas compatibles | 3 to 5-gallon water bottles |
| Fabricante | AQUART |
Figure 6: Product dimensions and suggested usage environments.
Figure 7: High-performance compressor details.
9. Garantía y soporte
For any product-related inquiries, technical support, or warranty claims, please contact VECYS customer service. While specific warranty details are not provided in this manual, VECYS is committed to customer satisfaction. Please retain your proof of purchase for any service requests.
For additional support and information, you may visit the official VECYS store on Amazon: VECYS Store
