Instrucciones de seguridad importantes
Before operating the Tineco iCarpet Spot Cleaner, please read all instructions carefully. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Úselo únicamente como se describe en este manual.
- No sumerja el aparato en agua ni en otros líquidos.
- Mantenga el cabello, la ropa suelta, los dedos y todas las partes del cuerpo lejos de las aberturas y las partes móviles.
- No utilizar para recoger líquidos inflamables o combustibles.
- Desconéctelo del tomacorriente cuando no esté en uso y antes de limpiarlo o repararlo.
- Este aparato no está diseñado para ser utilizado por personas (incluidos niños) con capacidades físicas, sensoriales o mentales reducidas, o con falta de experiencia y conocimientos, a menos que hayan recibido supervisión o instrucciones sobre el uso del aparato por parte de una persona responsable de su seguridad.
Producto terminadoview
The Tineco iCarpet Spot Cleaner is a powerful and versatile corded spot cleaner designed for effective stain removal on carpets, upholstery, and other surfaces. Its lightweight and compact design ensures easy maneuverability and storage.
Características principales:
- Potente succión: 300W brush motor with over 45W suction power for deep cleaning.
- Dual Tools: Specialized tools for both soft and hard surfaces.
- Ligero y compacto: Weighs 7.4 lbs (3.36 kg) for easy portability and storage.
- Tanque de agua 2 en 1: Combined clean water fill and dirty water empty function for convenience.
- Pre-Treatment Solution: Included to loosen and lift tough stains and odors.
- 4.75ft Rubber Hose: Provides flexible access to tight spots and hard-to-reach areas.
- Diseño con cable: Ensures continuous power for uninterrupted cleaning sessions.
Qué incluye
Verifique que todos los componentes estén presentes en el paquete:
- 1 x Tineco iCarpet Spot Cleaner Unit
- 1 x Care and Deep Cleaning Solution
- 1 x Pre-treatment Formula
- 1 x Rubber Hose
- 1 x Multi-surface Brush
Image: All items included in the Tineco iCarpet Spot Cleaner package.
Configuración
- Desembalaje de la unidad: Retire con cuidado todos los componentes del embalaje.
- Conecte la manguera: Connect the rubber hose securely to the main unit's hose port. Ensure it clicks into place.
- Llene el tanque de agua limpia:
- Remove the 2-in-1 water tank from the unit.
- Open the clean water tank cap.
- Fill with warm water (max 60°C/140°F) up to the MAX fill line.
- Add the recommended amount of Tineco cleaning solution to the clean water tank. Do not overfill.
- Cierre bien la tapa y vuelva a insertar el tanque en la unidad.
Image: Demonstrates filling the clean water tank and emptying the dirty water tank.
- Seleccionar y colocar la herramienta de limpieza: Choose the appropriate cleaning tool (e.g., multi-surface brush) for your task and attach it to the end of the hose.
Instrucciones de funcionamiento
Pre-Treatment (Optional but Recommended):
For tough stains, pre-treat the area with the included pre-treatment formula.
- Spray the pre-treatment solution directly onto the stain.
- Allow it to sit for 5-10 minutes to loosen the stain. Do not let it dry.
Image: Applying pre-treatment solution to a stained carpet.
Limpieza de manchas:
- Encendido: Plug the unit into a grounded electrical outlet. Press the power button to turn on the cleaner.
- Aplicar solución: Hold the cleaning tool over the stain. Press the trigger on the tool to spray cleaning solution onto the stained area.
- Exfoliante y extracción: Gently scrub the stain with the brush on the cleaning tool. Release the trigger and slowly pull the tool over the wet area to extract the dirty solution. Repeat as necessary until the stain is removed and the extracted water appears clean.
- Seque el área: After cleaning, continue to extract any remaining moisture from the cleaned area by pulling the tool over it without pressing the spray trigger. This helps to speed up drying time.
- Apagado: Una vez finalizada la limpieza, apague la unidad y desconéctela del tomacorriente.
Image: Demonstrating powerful suction during deep cleaning on a carpet.
Image: Illustrates the versatility of dual tools for cleaning multiple surfaces.
Image: User cleaning a carpet stain with the extended rubber hose.
Mantenimiento
Regular maintenance ensures optimal performance and extends the life of your Tineco iCarpet Spot Cleaner.
- Vaciar y limpiar el tanque de agua sucia:
- Después de cada uso, retire el depósito de agua sucia.
- Vierta el agua sucia y enjuague bien el tanque con agua limpia.
- Allow the tank to air dry before reassembling.
- Limpiar la herramienta de limpieza:
- Retire la herramienta de limpieza de la manguera.
- Enjuague la herramienta con agua corriente para eliminar cualquier residuo o suciedad.
- Ensure the nozzle is clear of blockages.
- Limpiar la manguera:
- Periodically, run clean water through the hose to flush out any residue.
- Ensure the hose is completely dry before storing to prevent odors.
- Conservar adecuadamente: Store the unit in a dry, cool place. The compact design allows for easy storage.
Image: The lightweight and compact design of the cleaner allows for easy storage.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Sin poder | Unit not plugged in; power outlet not working. | Asegúrese de que el cable de alimentación esté bien enchufado a una toma de corriente que funcione. Revise el disyuntor. |
| No spray/Low spray | Clean water tank empty; nozzle clogged; pump issue. | Refill clean water tank. Clean the spray nozzle. Contact customer support if pump issue persists. |
| Mala succión | Dirty water tank full; hose/tool clogged; tank not seated correctly. | Empty dirty water tank. Clear any blockages in the hose or tool. Ensure dirty water tank is securely in place. |
| Fugas | Water tanks not sealed properly; hose connection loose. | Ensure both clean and dirty water tanks are securely closed and seated. Check hose connections. |
Presupuesto
- Número de modelo: SC050900SA
- Quétage: 300 W
- Poder de succión: Más de 45W
- Capacidad del tanque de agua limpia: 800 mL (approx.)
- Capacidad del tanque de agua sucia: 600 mL (approx.)
- Longitud de la manguera: 4.75 pies (145 cm)
- Peso del artículo: 7.4 libras (3.36 kg)
- Fuente de energía: Eléctrico con cable
- Certificaciones: CE & GS Certified
Garantía y soporte
The Tineco iCarpet Spot Cleaner comes with a 2 año de garantía a partir de la fecha de compra, cubriendo defectos de fabricación bajo uso doméstico normal.
For warranty claims, technical support, or replacement parts, please contact Tineco Customer Service:
- Websitio: www.tineco.com
- Correo electrónico: Refer to your product registration or packaging for specific regional email support.
- Teléfono: Refer to your product registration or packaging for specific regional phone support.
Please have your model number (SC050900SA) and proof of purchase ready when contacting support.
