YuanLey 10 Port 2.5G PoE Switch Unmanaged User Manual

1. Introducción

This manual provides essential information for the proper installation, operation, and maintenance of your YuanLey 10 Port 2.5G PoE Unmanaged Switch. Please read this manual thoroughly before using the device to ensure optimal performance and safety.

2. Información de seguridad

Tenga en cuenta las siguientes precauciones de seguridad para evitar daños al dispositivo y garantizar la seguridad del usuario:

• Asegúrese de que la fuente de alimentación voltage is within the specified range (AC 100-240V, 50-60Hz).
• No abra el dispositivo casing. Deje todo servicio a personal cualificado.
• Evite colocar el interruptor en áreas con alta humedad, temperaturas extremas o luz solar directa.
• Ensure proper ventilation to prevent overheating. The fanless design relies on ambient airflow.
• Utilice únicamente el cable de alimentación y los accesorios proporcionados.
• Desconecte la alimentación antes de limpiar o mover el dispositivo.

3. Contenido del paquete

Verifique que todos los artículos estén presentes en el paquete:

• 1x YuanLey 10 Port 2.5G PoE Unmanaged Switch
• Cable de alimentación 1x
• 1x Manual de usuario
• 1x Rackmount Kit

Image: The YuanLey 10 Port 2.5G PoE Switch and its retail packaging, illustrating the product and its box.

4. Producto terminadoview

The YuanLey 10 Port 2.5G PoE Unmanaged Switch is designed to provide high-speed network connectivity with Power over Ethernet capabilities. It features 8x 2.5G Base-T PoE ports and 2x 10G SFP+ ports for flexible network expansion.

4.1 Panel frontal

Imagen: Detallada view of the switch's front and back panels, highlighting the 2.5G PoE ports, 10G SFP+ ports, power input, and VLAN switch.

• Puertos PoE (1-8): 2.5 Gigabit Ethernet ports supporting IEEE 802.3af/at PoE. Each port can deliver up to 30W, with a total PoE budget of 120W. These ports are compatible with 10/100/1000Mbps and 2.5Gbps devices.
• Puertos SFP+ 10G (9-10): Two 10 Gigabit SFP+ slots for fiber optic connections, compatible with 1G/2.5G/10G SFP modules (modules not included).
• Indicadores LED:
  • PWR (Potencia): Green indicates power on.
  • PoE Link/Act: Orange for 2.5Gbps link, Green for 10/100/1000Mbps link. Flashing indicates data activity.
  • SFP Indicator: Green indicates link connection.
• S&V Dip Switch: Toggles between Standard Mode and VLAN Mode.

4.2 Panel trasero

• Entrada de alimentación de CA: Standard AC 100-240V, 50-60Hz input.
• Terminal de puesta a tierra: Para conectar un cable de tierra para garantizar la seguridad eléctrica.

5. Configuración

The YuanLey 10 Port 2.5G PoE Switch is a plug-and-play device, requiring no complex configuration for basic operation.

5.1 Instalación física

1. Colocación: Place the switch on a stable, flat surface or mount it in a 19-inch rack using the provided rackmount kit. Ensure adequate space around the device for ventilation.
2. Conexión de energía: Connect the provided power cord to the AC power input on the rear panel of the switch and then to a suitable power outlet. The PWR LED will illuminate green.

Image: A visual guide to the simple plug-and-play setup process, showing power connection and device connections.

5.2 Conexión de red

1. Connecting Non-PoE Devices: Connect your non-PoE network devices (e.g., computers, NAS, routers) to any of the 2.5G Base-T ports (1-8) using standard Ethernet cables.
2. Conexión de dispositivos PoE: Connect your PoE-compatible devices (e.g., IP cameras, wireless access points, IP phones) to any of the 2.5G Base-T PoE ports (1-8). The switch will automatically detect and provide power to these devices.
3. Conexión de enlace ascendente: For connecting to your main network or another switch, use one of the 10G SFP+ ports (9-10) with an appropriate SFP module and fiber optic cable, or use a standard Ethernet port if fiber is not required.

Image: An illustration demonstrating how to connect both PoE and non-PoE devices to the switch for a comprehensive network setup.

6. Instrucciones de funcionamiento

The switch operates automatically once connected. No software configuration is typically required for an unmanaged switch.

6.1 Modo estándar

In Standard Mode, all ports communicate freely with each other. This is the default mode for general network use.

6.2 VLAN Mode (One-Key VLAN)

To enhance network security and reduce broadcast storms, you can enable VLAN Mode using the S&V Dip Switch. In VLAN Mode, ports 1-8 are isolated from each other but can communicate with the SFP+ uplink ports (9-10). This prevents direct communication between connected devices on ports 1-8, routing all traffic through the uplink ports.

Image: A visual explanation of the One-Key VLAN feature, demonstrating how ports are isolated while maintaining uplink connectivity.

7. Mantenimiento

• Limpieza: Utilice un paño suave y seco para limpiar el exterior del interruptor. No utilice limpiadores líquidos ni en aerosol.
• Ventilación: Regularly check that the cooling vents are not obstructed to ensure proper heat dissipation.
• Firmware: As an unmanaged switch, firmware updates are generally not required or available.

8. Solución de problemas

Si tiene problemas con su conmutador, consulte los siguientes problemas y soluciones comunes:

• Sin energía:
  • Asegúrese de que el cable de alimentación esté conectado de forma segura al interruptor y a una toma de corriente que funcione.
  • Compruebe si la toma de corriente funciona enchufando otro dispositivo.
• Sin enlace/actividad en un puerto:
  • Verify that the Ethernet cable is properly connected at both ends.
  • Pruebe con un cable Ethernet diferente.
  • Asegúrese de que el dispositivo conectado esté encendido y funcionando correctamente.
  • Check the LED indicator for the port; if it's off, there might be no link.
• El dispositivo PoE no recibe energía:
  • Confirm that the connected device is IEEE 802.3af/at compliant.
  • Check the total PoE power budget (120W) and individual port power limit (30W) to ensure it's not exceeded.
  • Intente conectar el dispositivo PoE a un puerto PoE diferente.
• Velocidad de red lenta:
  • Ensure you are using Cat5e or higher-rated Ethernet cables for 2.5G speeds.
  • Verify that your connected devices (NICs, routers) support 2.5G Ethernet.
  • Compruebe si hay congestión en la red u otros dispositivos que consuman un ancho de banda significativo.

9. Especificaciones

10. Garantía y soporte

For warranty information and technical support, please refer to the official YuanLey webSitio web o contacte directamente con el servicio de atención al cliente. Conserve el recibo de compra para reclamaciones de garantía.