Manual del usuario de la mini grabadora láser SCULPFUN C1

1. Introducción

The SCULPFUN C1 Mini Laser Engraver is a compact and portable 3W diode laser machine designed for high-precision engraving on a wide variety of materials. Its ultra-fine 0.04mm laser spot allows for detailed imaging, making it suitable for DIY enthusiasts and beginners. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and troubleshooting.

2. Información de seguridad

WARNING: This product contains a Class IV laser. Direct exposure to the laser beam can cause severe eye damage and skin burns. Always wear protective eyewear when operating the machine. Never look directly into the laser beam.

• Laser Class: IV
• Laser Output: 3000mW
• Ensure proper ventilation when operating, as engraving can produce fumes. Use in a well-ventilated area or with an exhaust system.
• Do not engrave highly reflective materials without proper precautions.
• Mantener fuera del alcance de los niños y las mascotas.
• The machine is not recommended for cutting tasks or engraving bare metals due to limited power.
• The protective cover (if used) helps meet Class 1 laser engraving machine standards and enhances safety by stopping operation when opened.

3. Contenido del paquete

Verifique que todos los artículos estén presentes en su paquete:

• C1 Machine Body
• Cabezal láser
• Metal Protective Plate
• Acrylic Focusing Sheet
• Manual de usuario (este documento)
• Adaptador de corriente
• Repair Tools (Allen wrenches, wrench)
• Cable de datos (USB-A a USB-C)
• Gafas protectoras
• Metal Business Card (sample)
• Kraft Paper (sample)
• Madera contrachapada (sample)
• Paño de limpieza

Image: All components included in the SCULPFUN C1 Mini Laser Engraver package.

4. Configuración e instalación

The SCULPFUN C1 is designed for easy, one-step installation. Follow these steps to set up your engraver:

1. Desempaquetado: Carefully remove all components from the packaging. The main machine body comes pre-assembled.
2. Instalar el cabezal láser: Remove the magnetic protective cover from the laser head. Insert the laser head into its designated slot on the gantry. Secure it with the provided screw using the appropriate repair tool.
3. Conectar cables:
   • Connect the laser head cable to the port on the gantry.
   • Connect the power adapter to the power port on the machine and plug it into a wall outlet.
   • Connect the data cable (USB-A to USB-C) from the machine's data port to your computer.
4. Instalación del software:

   The SCULPFUN C1 is compatible with professional laser engraving software such as LightBurn (additional purchase) and LaserGRBL (free and open-source). For Windows 7 systems, it may be necessary to install a driver. For Windows 10/11 and MacOS, the machine is typically driver-free.

   Refer to the user manual (PDF) or scan the QR code provided in the physical manual for direct download links and detailed instructions for software setup and driver installation.

5. Initial Power On & Homing: Double-click the power button on the machine to initiate the homing sequence. The laser head will move to its home position, indicating it's ready for operation.

Image: Close-up of the SCULPFUN C1 showing the laser head being inserted into the gantry.

Image: SCULPFUN C1 with power and data cables connected, ready for software interface.

5. Instrucciones de funcionamiento

Once set up, the SCULPFUN C1 is ready for engraving. Ensure your material is placed flat on the working area.

1. Colocación de materiales: Coloque el material a grabar dentro del área de trabajo de 150x130mm.
2. Enfoque: Use the provided acrylic focusing sheet to set the correct focal distance for the laser. Place the sheet under the laser head and adjust the laser head's height until the laser spot is at its finest point on the material. Secure the laser head.
3. Interfaz de software: Open your chosen software (LightBurn or LaserGRBL). Import your desired image (supports JPG, PNG, BMP, GIF, SVG, AI, etc.).
4. Configuración de parámetros: Adjust engraving parameters such as speed, power, and interval based on your material and desired effect. The C1 can reach a maximum speed of 10000mm/min for some materials.
5. Enmarcado: Utilice la función "Marco" del software para previsualizarview the engraving area on your material. This helps ensure correct positioning.
6. Comenzar a grabar: Once satisfied with the settings and framing, initiate the engraving process from the software.

Imagen: Examples of materials that can be engraved with the SCULPFUN C1, including wood, anodized surfaces, leather, slate, acrylic, kraft paper, leaves, and colored cardstock.

Image: Illustration of the 0.04mm ultra-fine laser spot, highlighting its precision for detailed engraving.

6. Mantenimiento

Regular maintenance ensures optimal performance and extends the lifespan of your SCULPFUN C1.

6.1. Limpieza de la lente del láser

Dust and debris can accumulate on the laser lens, affecting engraving quality. Clean the lens regularly:

1. Apague y desenchufe la máquina.
2. Carefully remove the magnetic protective cover from the laser head.
3. Unscrew and remove the black lens cap from the bottom of the laser head.
4. Use a clean cotton swab lightly dampened with lens cleaning solution (or isopropyl alcohol) to gently wipe the lens. Avoid excessive pressure.
5. Allow the lens to dry completely before reassembling the lens cap and protective cover.

6.2. Ajuste del cinturón

Ensure the belts are properly tensioned for accurate movement of the laser head.

1. Inspect the belts for any looseness or wear.
2. If a belt is loose, use the provided repair tools to adjust the tensioning screws on the belt mechanism until the belt is taut but not overly tight.
3. For balance adjustment, loosen the screws on the coupling, push the gantry fully against the frame, and then re-tighten the screws. This ensures both sides of the gantry are aligned.

7. Solución de problemas

• La máquina no se conecta a la computadora:
  • Ensure the data cable is securely connected to both the machine and the computer.
  • Verify the machine is powered on (green light should be steady or flashing).
  • For Windows 7, check if the necessary drivers are installed. Refer to the software installation section.
  • Try a different USB port or data cable.
• Engraving quality is poor/faint:
  • Check the laser focus. Re-focus the laser using the acrylic focusing sheet.
  • Limpie la lente láser como se describe en la sección Mantenimiento.
  • Adjust software parameters (increase laser power, decrease speed, or reduce interval).
  • Ensure the material is suitable for laser engraving and is placed flat.
• Machine not moving correctly/making grinding noises:
  • Check for any obstructions in the gantry's path.
  • Inspect and adjust the belts for proper tension as described in the Maintenance section.
  • Asegúrese de que la máquina esté sobre una superficie estable y nivelada.
• Strong fumes/smell during engraving:
  • This is normal for many materials. Ensure adequate ventilation. Operate in a well-ventilated room, near an open window, or use an external fume extractor.

8. Especificaciones

Imagen: Detallada view of the SCULPFUN C1 showing product dimensions and port locations.

9. Garantía y soporte

For detailed warranty information and technical support, please refer to the official SCULPFUN websitio o el Manual de usuario completo en formato PDF que viene con su producto.

You can download the official User Manual PDF aquí.