1. Introducción
The Bloomy Luminology IPL Epilator utilizes advanced Intense Pulsed Light (IPL) technology for effective and long-lasting hair removal. Designed for both facial and body hair, this device offers 5 adjustable intensity levels to suit various skin types and treatment areas. Its integrated skin protection system ensures safe operation for both men and women.
The device features a sapphire filter, LCD display, and an ergonomic design for comfortable use. It provides a large flash area for quick treatments on areas like legs, arms, and back, and offers two modes: automatic for large areas and manual for sensitive or precise areas.
2. Información de seguridad
- Always wear the provided safety glasses during operation to protect your eyes from the intense pulsed light.
- Do not use the device on irritated, damaged, or recently tanned skin.
- Realice una prueba de parche en una pequeña zona de la piel 24 horas antes del tratamiento completo para comprobar si hay reacciones adversas.
- The device includes a skin detection system and eye protection features for enhanced safety.
- Mantenga el dispositivo alejado del agua y no lo utilice en entornos húmedos.
- Consult a doctor before use if you have any underlying skin conditions or are taking photosensitive medication.
3. Contenido del paquete
Por favor revise el paquete para ver los siguientes artículos:
- Bloomy Luminology IPL Epilator
- Power Adapter (AC100-240V, DC 12V/3A)
- Gafas de seguridad
- Manual de usuario (este documento)
4. Configuración
- Preparar la piel: Ensure the treatment area is clean, dry, and shaved. Do not wax or pluck hair before IPL treatment, as the hair follicle needs to be present for the light to be effective.
- Conecte la electricidad: Plug the power adapter into the device and then into a power outlet. The device will power on.
- Use gafas de seguridad: Put on the provided safety glasses before turning on the device to protect your eyes.
Image: Steps for preparing the skin, connecting the power, and adjusting the intensity level of the IPL device.
5. Instrucciones de funcionamiento
5.1. Ajuste de los niveles de intensidad
The Bloomy Luminology IPL Epilator features 5 adjustable intensity levels. It is recommended to start with the lowest intensity (Level 1) and gradually increase it based on your skin's comfort and reaction. Higher intensity levels generally yield better results but require careful monitoring of skin sensitivity.
Image: Visual guide for selecting appropriate intensity levels based on skin tone.
5.2. Treatment Modes
The device offers two treatment modes:
- Modo de flash manual: Ideal for precision areas such as the underarm, bikini line, and face. Press the flash button for each pulse.
- Modo de flash automático: Suitable for larger, straightforward areas like legs and stomach. Hold down the flash button, and the device will emit continuous flashes as you glide it over the skin.
Image: Explanation of Manual and Automatic flash modes for different body areas.
5.3. Aplicación
- Ensure your skin is clean, dry, and shaved.
- Select the appropriate intensity level and treatment mode.
- Place the device's flash window firmly against your skin, ensuring full contact.
- For Manual Mode, press the flash button. For Automatic Mode, hold the button and glide the device slowly over the skin.
- Mueva el dispositivo a la siguiente área, asegurándose de una ligera superposición para cubrir todos los folículos pilosos.
- Avoid flashing the same area multiple times in one session.
5.4. Programa de tratamiento
Typical treatment times for various body parts:
- Underarm (each side): 1 minute
- Face: 2 minutes
- Arm: 3 minutes
- Neck: 1 minute
- Shank: 5 minutes
- Shoulder: 1 minute
- Back: 12 minutes
- Thigh: 5 minutes
Consistent use over approximately 8 weeks is typically required to inhibit hair regrowth. Individual results may vary.
Image: Estimated treatment durations for various body areas.
6. Mantenimiento
- Limpieza: After each use, ensure the device is unplugged and cooled down. Gently wipe the flash window with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Almacenamiento: Guarde el dispositivo en un lugar fresco y seco, alejado de la luz solar directa y fuera del alcance de los niños.
7. Solución de problemas
- El dispositivo no enciende: Asegúrese de que el adaptador de corriente esté conectado de forma segura tanto al dispositivo como a una toma de corriente que funcione.
- No flash: Check if the flash window is in full contact with the skin. The device has a skin contact sensor that prevents flashing if not properly placed. Ensure the intensity level is set correctly.
- Irritación de la piel: If you experience redness or discomfort, reduce the intensity level or discontinue use. Ensure your skin is clean and dry before treatment.
- Uneven results: Ensure you are overlapping treatment areas slightly and consistently applying the device.
8. Especificaciones
| Característica | Especificación |
|---|---|
| Nombre del modelo | Luminology |
| Fabricante | Floreciente |
| Fuente de luz | Luz Pulsada (IPL) |
| Energía | 1.5 – 3.9 J/cm² (Technical: 4.2 J/cm² max) |
| Flash Area | 33 × 10 mm² |
| Longitud de onda | 470-1100 nm |
| Lamp Vida | ≥ 500,000 flashes |
| Adaptador | AC100-240V, DC 12V/3A |
| Peso | 186 g (Device), 180 g (Item) |
| Dimensiones | 124 × 83 × 48.5 mm (Device), 48 x 8 x 0.1 cm (Product) |
| Temperatura de funcionamiento | 5 °C – 30 °C |
| Humedad de funcionamiento | 30% – 60% HR |
| Fuente de poder | Eléctrico |
| Nivel de resistencia al agua | No resistente al agua |
| Volumentage | 220 voltios |
| Tiempo de funcionamiento | 60 minutos |
9. Garantía y soporte
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Bloomy customer service. Keep your purchase receipt as proof of purchase.
