BBLD 9301-1E

BBLD 1/18 Scale RC Car (Model 9301-1E) Instruction Manual

1. Introducción

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your BBLD 1/18 Scale RC Car, Model 9301-1E. Please read this manual thoroughly before operating the vehicle to ensure optimal performance and longevity.

2. ¿Qué hay en la caja?

Your BBLD RC Car package includes the following items:

BBLD 1/18 Scale RC Car and included accessories

Image: The BBLD 1/18 Scale RC Car, remote control, two batteries, USB charging cable, and various tools included in the package.

3. Producto terminadoview

The BBLD 1/18 Scale RC Car is an IPX4 waterproof 4X4 off-road truck designed for various terrains. It features a robust RC380 brushed motor and a 2.4GHz anti-interference remote control system.

Características principales:

BBLD RC Car demonstrating high speed on a dirt track

Image: The BBLD RC Car in action, highlighting its speed capability of 40KM/H.

BBLD RC Car with two batteries, illustrating 45 minutes of playtime

Image: The BBLD RC Car with two batteries, emphasizing the extended playtime of 45 minutes.

BBLD RC Car remote control with labeled functions

Image: The 2.4GHz remote control system for the BBLD RC Car, showing controls for forward, brake, backward, steering, steering trim, speed switch, and indicator light.

BBLD RC Car with off-road tires on various terrains

Image: The BBLD RC Car showcasing its off-road tires designed for diverse terrains including snow and mud.

BBLD RC Car components including lights, shell, motor, shock absorbers, bearings, and tires

Imagen: Detallada view of the BBLD RC Car's components: cool car lights, environmental PVC car shell, long-lasting and powerful motor, adjustable shock absorber, 15-grain bearing, and 69mm all-terrain rubber tire.

BBLD RC Car dimensions and accessories

Image: The BBLD RC Car with its dimensions (11.42in/290mm length, 7.68in/195mm width, 5.12in/130mm height) and a list of included accessories.

Vídeos oficiales del producto:

Vídeo: Una breve presentaciónview mostrarasing the BBLD Remote Control Car's ability to conquer various terrains and its off-road performance, including driving through water.

Video: A brief demonstration of the BBLD RC Truck's features and capabilities.

4. Configuración

Instalación de la batería (vehículo)

  1. Remove the four body clips located on each corner of the car's shell.
  2. Carefully lift the car's shell to expose the internal components.
  3. Connect the red battery connector from the battery to the corresponding red connector on the vehicle's internal wiring. Ensure a secure connection.
  4. Secure the battery using the hook-and-loop strap provided in the battery compartment.
  5. Replace the car's shell and re-insert the four body clips.

Instalación de la batería (control remoto)

  1. Abra la tapa del compartimiento de la batería en la parte posterior del control remoto.
  2. Inserte 4 pilas AA (no incluidas) en el compartimento, asegurándose de la polaridad correcta.
  3. Cierre la tapa del compartimento de la batería.

Cargando las baterías

  1. Connect the white plug from the battery to the USB charging cable.
  2. Plug the USB charging cable into a 5V/0.5-2.0A USB adapter (e.g., computer USB port, USB wall adapter).
  3. The indicator light on the USB charger will show charging status (e.g., red for charging, green for fully charged).
  4. Charging typically takes approximately 1.5 hours per battery.

Pairing the Remote Control and Vehicle

  1. Ensure the vehicle's battery is connected and secured.
  2. Encienda el control remoto presionando y manteniendo presionado el botón de encendido hasta que la luz indicadora parpadee.
  3. Turn on the vehicle by sliding the ON/OFF switch located inside the chassis.
  4. The remote control and vehicle will automatically pair. The indicator lights on the transmitter and ESC should flash during binding and remain solid on the ESC after successful binding.

5. Instrucciones de funcionamiento

Familiarícese con las funciones del control remoto antes de operar el vehículo.

Funciones del control remoto:

Consejos de conducción:

6. Mantenimiento

Mantenimiento general:

Cuidado de la batería:

Battery Charging Safety Instructions for BBLD RC Car

Image: Important safety instructions for battery charging, including warnings against unattended charging, damaged chargers, and improper battery handling.

7. Solución de problemas

Consulte la siguiente tabla para conocer problemas comunes y sus soluciones:

ProblemaPosible causaSolución
Vehicle Stop WorkingCar battery is flat or damagedFully charge the battery pack. If charging does not work, use a new battery. Check if there is a problem with the charging cable. If so, replace it with a new one.
Las baterías del control remoto no están instaladas correctamenteCheck and confirm that the battery is installed properly.
Vehicle is not connected with transmitterCheck to ensure that the transmitter and car are connected. The LEDs on the transmitter and ESC should flash during binding and remain solid on the ESC after binding.
Protección contra sobrecalentamientoIf the vehicle body is driven at high temperatures for a long time, it may turn on the protection and cut off the power to avoid the risk of overheating and damage to the motor. Take out the vehicle battery and wait for it to cool down completely and fully recharge.
Parts damagedCheck for damaged parts such as wires, connectors, motors, ESCs, axles, etc. Repair or replace if necessary.
Vehicle works, but has poor or no steeringCar battery is flat or damagedFully charge the battery pack. Or replace it if needed.
Steering trim not properly setAdjust the 'ST. TRIM' on the transmitter to check whether the tires can be steered.
Parts loose or damagedCheck if the steering linkage is loose/broken or if the servo is faulty.
Incapable of connection / Short control rangeCar/transmitter battery is flat or damagedCheck and fully charge the battery pack, or replace it if needed.
La distancia de control es demasiado largaCheck to be within signal transmission distance.
Interferencia de señalStop driving and try to operate the vehicle in a new area. If the problem persists, contact the after-sales service.
Duración de batería cortaOld/worn-out batteryLook for swelling, deformation, edge damage. Replace with new battery.
La batería no está completamente cargadaEnsure proper charging following battery charging guidelines.
Constant high-speed/rapid accelerationAvoid sustained high speeds and sudden acceleration to extend battery life.
Sluggish PerformanceDirty or damaged drivetrain/suspensionInspect and replace any broken gears, shafts, outdrive cups, suspension components, etc.
La batería no se cargaSe utilizó un adaptador incorrectoOnly use 5V/0.5-2.0A adapter. Incorrect adapter may damage battery/charger.
Over-discharged or damaged batteryCheck battery pack condition and replace if needed.
Damaged USB chargerCheck USB cable/charger following charging instructions and replace if needed.
Vehicle Does Not ReverseBatería bajaEnsure battery is fully charged before operating.
Incorrect throttle center point setupTurn power off/on without moving trigger until the vehicle is bound with the transmitter to allow ESC/Receiver's auto-setup of the throttle center point.
Incorrect trigger operationCenter trigger first, then pull back to go in reverse, to allow ESC/Receiver's auto-setup of the throttle center point.
Damaged waterproof ESC/Receiver or transmitterReplace the waterproof ESC/Receiver unit or transmitter.

8. Especificaciones

9. Información de seguridad

10. Garantía y soporte

Your BBLD RC Car comes with a 12-month extended warranty. For any technical support, missing parts, or warranty claims, please contact BBLD US directly through their official channels or the Amazon seller support page.

Documentos relacionados - 9301-1E

Preview Manual de montaje del buggy eléctrico todoterreno de competición Team Associated RC8B4.1e a escala 1:8
Este es el manual de montaje del Team Associated RC8B4.1e, un kit de buggy eléctrico todoterreno de competición a escala 1:8 con tracción a las cuatro ruedas. Incluye instrucciones detalladas paso a paso, listas de piezas y consejos útiles para el montaje del modelo.
Preview Siemens GMA..1 Aire DampActuadores er: Ficha técnica
Especificaciones técnicas detalladas, funciones e información de pedido de los compresores de aire rotativos serie GMA..1 de SiemensampActuadores er. Abarca tipos de control de dos y tres posiciones, así como de modulación, con retorno por resorte, ideales para aplicaciones de climatización (HVAC).
Preview Manual de instrucciones del truggy VRX-1E a escala 1/8, 4x4, sin escobillas, listo para usar
Manual de instrucciones completo para el VRX-1E Truggy 4WD sin escobillas listo para usar a escala 1/8, que abarca características, datos técnicos, precauciones de seguridad, manejo de la batería, carga, almacenamiento y listas de piezas.
Preview Manual de usuario y guía de configuración del Carisma MSA-1E Suzuki Jimny JB74 a escala 1/24
Manual de usuario y guía de configuración completos para el Crawler Carisma MSA-1E a escala 1/24, con carrocería Suzuki Jimny JB74. Incluye instrucciones de configuración, precauciones de seguridad, identificación de piezas y especificaciones técnicas.
Preview Instrucciones de montaje de los actuadores Siemens
Instrucciones de montaje para actuadores Siemens, incluidos diagramas de cableado y especificaciones técnicas para los modelos G..A161.1E/MO, G..B161.1E/MO, GEB161.1E/MO y GIB161.1E/MO.
Preview Fundamentos técnicos del controlador compacto Siemens OpenAir™ VAV KNX/PL-Link G..B181.1E/KN
Documentación técnica para los controladores compactos Siemens OpenAir™ VAV (KNX/PL-Link G..B181.1E/KN), que cubre los conceptos básicos del dispositivo, la instalación, la ingeniería, la puesta en marcha y las especificaciones técnicas para sistemas de automatización de edificios.