1. Introducción
This manual provides instructions for the installation and operation of your BN-LINK CP-UWLD28 Dimmer Light Switch. This dimmer switch is designed for single-pole applications and requires a neutral wire for proper functionality. It supports dimmable LED, CFL, and incandescent light bulbs, offering two distinct dimming modes and a memory function to recall your last brightness setting.
2. ¿Qué hay en la caja?
- 1x Dimmer Light Switch
- 1x placa de pared
- 4x tuercas de alambre
- 2x tornillos largos
- 2x tornillos cortos
- 1x Manual de usuario (este documento)
Image: The package contents, including the dimmer switch, wall plate, wire nuts, and mounting screws.
3. Especificaciones
| Característica | Detalle |
|---|---|
| Modo de operación | ENCENDIDO APAGADO |
| Calificación actual | 3 Amps |
| Vol de funcionamientotage | 125 voltios |
| Dispositivos compatibles | Dimmable LED (3W-150W), CFL (3W-150W), Incandescent (3W-400W) |
| Tipo de control | Botón pulsador manual |
| Protocolo de conectividad | N.A (No WiFi) |
| Dimensiones (L x An x Al) | 4.49 x 2.76 x 1.34 pulgadas |
| Peso del artículo | 5 onzas |
| Color | Blanco |
Image: Product dimensions of the dimmer switch.
4. Instalación
Importante: Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring. Ensure power is turned off at the circuit breaker before beginning installation.
- Apagar la energía: Locate the circuit breaker controlling the light switch you intend to replace and turn off the power. Verify the power is off using a voltage probador.
- Quitar el interruptor antiguo: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
- Identificar cables: Identify the following wires in your electrical box:
- Cable de línea: Transporta energía desde el disyuntor.
- Cable de carga: Se conecta a la luminaria.
- Cable neutro: Typically white, required for this dimmer switch.
- Cable a tierra: Cobre desnudo o verde.
- Conecte el interruptor de regulación de intensidad: Connect the wires from the dimmer switch to the corresponding wires in the electrical box using the provided wire nuts. Refer to the wiring diagram below.
- Interruptor de atenuación Alambre blanco a la caja de pared Cable neutro
- Interruptor de atenuación Alambre negro a la caja de pared Power Supply's Line (Live)
- Interruptor de atenuación Cable rojo a la caja de pared Cable de carga
- Interruptor de atenuación Cable verde a la caja de pared Cable de tierra
- Monte el interruptor: Carefully push the wired dimmer switch into the electrical box. Secure it with the provided screws.
- Instale la placa de pared: Attach the new wall plate over the dimmer switch.
- Restaurar energía: Vuelva a encender la energía en el disyuntor.
Image: Wiring diagram for single-pole installation. Ensure a neutral wire is available.
Note: This dimmer switch works in single-pole only and requires a neutral wire. It is not a smart dimmer switch and cannot be connected to Wi-Fi.
5. Operación
The BN-LINK Dimmer Light Switch features intuitive controls for adjusting light brightness and an indicator light for visibility in the dark.
Estreno
During the first use, press the power button on the dimmer switch. The initial brightness of the light is set at 100%. Use the "+" and "-" buttons for fast adjustments and fine adjustment.
Video: Demonstration of the BN-LINK Dimmer Light Switch's operation, including fast and fine dimming adjustments and memory function.
Controles sobreview
Image: Labeled buttons on the dimmer switch for power, dimming up, and dimming down, with indicator lights.
- Botón de encendido: Press to turn the lighting On/Off.
- Dimmer "+" Button:
- Fast Adjustment: Press briefly to increase brightness by 10% each time.
- Ajuste fino: Press and hold to gradually increase brightness by 1% each time. - Dimmer "-" Button:
- Fast Adjustment: Press briefly to decrease brightness by 10% each time.
- Ajuste fino: Press and hold to gradually decrease brightness by 1% each time. - Luces indicadoras: Display the current brightness level (20%, 40%, 60%, 80%, 100%).
Image: Visual representation of the fast (10% increments) and fine (1% increments) brightness adjustment modes.
Función de memoria
The dimmer switch remembers the last brightness level used and restores it automatically the next time the light is turned on.
Image: The thoughtful indicator light helps locate the dimmer easily in the dark.
6. Compatibilidad
This dimmer switch is compatible with various dimmable light sources:
- LED regulable: 3-150W, 125V/60Hz
- CFL regulable: 3-150W, 125V/60Hz
- Incandescente Lamp: 3-400W, 125V/60Hz
Please ensure that your fluorescent lamp y LEDamp are dimmable, and the total load of the bulbs is within the specified range.
Image: Illustration of wide compatibility with incandescent, dimmable LED, and dimmable CFL bulbs.