Introducción
Gracias por la compraasing the COLAMY B6269-02 Counter Height Bar Stools. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your new bar stools. Please read this manual thoroughly before assembly and retain it for future reference.
Información de seguridad
- Monte siempre el taburete siguiendo las instrucciones proporcionadas.
- Ensure the stool is fully assembled and stable before use.
- No exceda el límite de peso máximo de 250 libras to prevent tipping or damage to the stool.
- Revise y apriete periódicamente todos los tornillos y pernos para mantener la estabilidad.
- Evite permanecer de pie sobre el taburete.
- Mantenga a los niños alejados del área de reunión.
Lista de piezas
Antes de comenzar el montaje, asegúrese de que todas las piezas estén presentes y sin daños. Consulte el diagrama a continuación para su identificación.
Figure 1: Included Components and Hardware
- Cojín del asiento (A)
- Back Cushion (B)
- Upper Leg (C) x 2
- Lower Leg (D) x 2
- Wood Strip (E, F, G) x 3
- X-Metal Plate (H) x 1
- Screw Bag (I) - Contains various bolts, washers, and Allen wrench.
Instrucciones de montaje
Please prepare the included cross wrench before assembly. It is recommended to tighten bolts to 50% initially and fully tighten them at the final step.
Step 1: Assemble the Leg Frame Base
Install upper leg C and lower leg D. Then, place the X-metal plate H on the bottom of the legs' cross connection. Use four M6*20mm bolts to tighten them to 50%. Use the Allen wrench N.
Figure 2: Leg Frame Base Assembly
Step 2: Attach Front and Side Strips
Attach the front strip E, back strip F, and middle strip G to the leg frame. Pay attention to the screw holes direction on the strips, following the diagram for reference.
Figure 3: Attaching Wood Strips
Step 3: Secure Wood Screws
Insert six M4*35mm wood screws K into the screw holes, using your own cross wrench to tighten the screws to 50%.
Figure 4: Securing Wood Screws
Step 4: Attach Seat Cushion
Attach the seat cushion A to the finished wood frame. Use four M6*30mm bolts J, spring washer L, and flat washer M. Then tighten by Allen wrench N to 50%.
Figure 5: Attaching Seat Cushion
Paso 5: Coloque el cojín del respaldo
Attach the back cushion B to the finished frame. Use two M6*20mm bolts I. Tighten by Allen wrench N to 50%.
Figure 6: Attaching Back Cushion
Paso 6: Ajuste final
Tighten all screws to 100% to ensure the stool is stable and secure.
Figure 7: Final Tightening of All Screws
Step 7: Adjust Levelers
Adjust the foot levelers at the bottom of the legs to ensure the chair is level and stable on your floor surface.
Figure 8: Adjusting Foot Levelers
Your COLAMY bar stool is now successfully installed.
Instrucciones de funcionamiento
The COLAMY B6269-02 bar stools are designed for comfortable seating at counter height surfaces. They feature an ergonomic design with a contoured backrest and soft cushioning for extended use.
- Capacidad de asientos: Each stool is designed to support a maximum weight of 250 pounds.
- Reposapiés: Utilize the built-in footrest for enhanced comfort and stability.
- Colocación: Suitable for kitchen islands, dining rooms, home bars, or similar counter-height areas.
Figura 9: Características de diseño ergonómico
Figura 10: Casos de uso versátiles
Mantenimiento
- Limpieza: Wipe the stool with a dry cloth to remove dust and spills. Avoid using harsh chemicals or abrasive cleaners, which may damage the fabric or wood finish.
- Inspección regular: Periodically inspect all bolts and screws. Over time, they may loosen with use. Tighten them as necessary to maintain the stool's stability and prevent wobbling.
- Evite la humedad excesiva: Protect the wood components from prolonged exposure to moisture.
- Límite de peso: Adhere strictly to the 250-pound weight limit to prevent structural damage.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Stool wobbles or feels unstable. | Tornillos flojos o superficie del piso irregular. |
|
| Screws frequently loosen. | Normal wear and tear; insufficient initial tightening. |
|
| Creaking noises during use. | Loose joints or screws. |
|
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | B6269-02 |
| Dimensiones del producto (Pr. x An. x Al.) | 20.47" de profundidad x 22.05" de ancho x 37.4" de alto |
| Altura del asiento | 25.59" (from floor to seat) |
| Altura del respaldo | 11.81" (from seat to top of backrest) |
| Profundidad del asiento | 19.49" |
| Color | Camel (Z-camel) |
| Material | Wood (Frame), Polyurethane (Seat Material Type), Fabric, Sponge |
| Recomendación de peso máximo | 250 libras |
| Peso del artículo (por taburete) | 16.87 libras |
| Requiere ensamblaje | Sí |
| Número de piezas | 2 (por juego) |
Figura 11: Dimensiones del productoview
Producto terminadoview Video
Mira este video para tener una idea visualview of the COLAMY B6269-02 Counter Height Bar Stools.
Video 1: COLAMY Bar Stool Product Overview. This video demonstrates the design and features of the bar stools.
Información de garantía
Specific warranty details for the COLAMY B6269-02 Counter Height Bar Stools are not provided in this manual. Please refer to your purchase documentation or contact the retailer for information regarding warranty coverage.
Atención al cliente
For any questions, missing parts, or assistance with assembly or use, please contact the retailer or COLAMY customer service. Contact information may be available on the product packaging or the retailer's websitio.
