Introducción
This manual provides detailed instructions for the assembly, operation, and maintenance of your Polibi Full Size Upholstered Platform Bed. Please read all instructions carefully before assembly and use to ensure safe and proper functionality of the product.
Información de seguridad
ADVERTENCIA: El incumplimiento de estas instrucciones de seguridad podría provocar lesiones graves o daños al producto.
- Mantenga todos los accesorios de montaje fuera del alcance de los niños.
- Asegúrese de que todos los pernos y tornillos estén bien apretados antes de usar. Revíselos periódicamente y apriételos según sea necesario.
- Do not exceed the maximum weight capacity: 600 lbs for the main bed, 250 lbs for the trundle.
- Úselo solo en una superficie plana y nivelada.
- No se pare ni salte sobre la cama.
- Exercise caution when extending or retracting the trundle bed to avoid pinching.
- Ensure electrical connections for the charging station are properly installed and not overloaded. Disconnect power before cleaning or if any damage is observed.
Contenido del paquete
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Polibi customer support.
- Cabecero y rieles laterales tapizados
- Listones de cama y patas de apoyo
- Trundle Bed Frame and Slats
- Escritorio integrado y estantes de almacenamiento
- Charging Station Unit (USB ports and outlets)
- Herrajes de montaje (tornillos, pernos, llave Allen)
- Manual de instrucciones
Configuración y montaje
Assembly typically requires two adults. Please follow the steps below in sequence.
Paso 1: Desembalaje e identificación de los componentes
Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the parts list in your included manual to identify each component.
Imagen 1: Másview of the Polibi Full Size Upholstered Platform Bed, showcasing the main bed, integrated desk, storage shelves, and charging station.
Paso 2: Ensamblar el marco de la cama principal
Connect the headboard, footboard, and side rails using the provided hardware. Ensure all connections are snug but do not overtighten until all parts are aligned.
Image 2: The main bed frame structure with wooden slats in place, ready for mattress placement.
Paso 3: Instalar los listones de la cama
Evenly space and secure the wooden bed slats across the frame. This provides support for your mattress. Ensure all slats are firmly attached to prevent movement.
Step 4: Assemble the Integrated Desk and Storage
Attach the desk and storage shelf components to the main bed frame as indicated in the detailed assembly diagram. These sections are designed to integrate seamlessly with the bed's structure.
Imagen 3: Detallada view of the integrated desk, storage shelves, and the built-in charging station with USB ports and power outlets.
Paso 5: Instale la estación de carga
Carefully insert the charging station unit into its designated slot on the desk/storage component. Ensure it is flush and secure. Connect the power cord to a wall outlet after the bed is fully assembled and positioned.
Paso 6: Ensamblar la cama nido
Assemble the trundle bed frame and install its slats. The trundle is designed to slide underneath the main bed. Ensure the wheels are properly attached for smooth operation.
Image 4: The Polibi bed with the trundle frame visible, showing how it slides out from underneath the main bed.
Paso 7: Ajuste final y colocación
Once all components are assembled, go back and securely tighten all bolts and screws. Position the bed in its desired location. Plug in the charging station.
Image 5: Dimensional diagram illustrating the overall length (88.5"), width (66.5"), and height (29.5") of the Polibi bed.
Instrucciones de funcionamiento
Uso de la cama nido
To extend the trundle bed, gently pull the handle located on the front panel of the trundle. The trundle will roll out smoothly on its wheels. To retract, push the trundle back underneath the main bed until it is fully concealed.
Image 6: The Polibi bed with the trundle fully extended, demonstrating its functionality as an additional sleeping space.
Uso de la estación de carga
Once the bed is assembled and the charging station is plugged into a wall outlet, you can use the two standard AC outlets and two USB ports to power or charge your electronic devices. Ensure devices are compatible with the provided power output.
Utilizing the Desk and Storage Shelves
The integrated desk provides a convenient surface for laptops, books, or other items. The storage shelves offer space for organizing personal belongings, books, or decorative items. Distribute weight evenly on shelves.
Mantenimiento
- Limpieza: Para la tela tapizada, limpie suavemente las manchas con un paño húmedo.amp cloth and mild detergent. Avoid harsh chemicals. For wooden or MDF surfaces, wipe with a dry or slightly damp paño.
- Comprobación del hardware: Inspeccione periódicamente todos los pernos y tornillos para asegurarse de que estén bien apretados. Vuelva a apretarlos según sea necesario para mantener la estabilidad.
- Mecanismo de rueda giratoria: Keep the trundle wheels and tracks free of debris to ensure smooth operation.
- Componentes eléctricos: Ensure the charging station is kept dry. Do not attempt to repair damaged electrical components; contact a qualified technician or customer support.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La cama se siente inestable o tambaleante. | Herrajes sueltos. | Revise y apriete todos los pernos y tornillos. Asegúrese de que la cama esté sobre una superficie nivelada. |
| El nido no se desliza suavemente. | Debris in tracks, damaged wheels, or uneven floor. | Clean tracks. Inspect wheels for damage. Ensure the bed is on a level surface. |
| La estación de carga no funciona. | No enchufado, sin energíatage, or faulty unit. | Ensure the power cord is securely plugged into a working wall outlet. Check circuit breaker. If issues persist, contact customer support. |
| Piezas faltantes durante el montaje. | Error de embalaje. | Contact Polibi customer support with your purchase details and a list of missing parts. |
Presupuesto
- Marca: polibi
- Modelo: B0FM3XGX96
- Tamaño: Lleno
- Dimensiones del producto (L x An x Al): 88.5" x 66.5" x 29.5"
- Material: Pine Wood + MDF, Upholstered (Velvet Fabric, High-Density Foam)
- Capacidad de peso (cama principal): 600 libras
- Capacidad de peso (nido): 250 libras
- Características especiales: Integrated Charging Station (2 AC outlets, 2 USB ports), Storage Shelves, Pull-out Trundle Bed, Desk
- Requiere ensamblaje: Sí
Garantía y soporte
For warranty information, missing parts, or technical assistance, please contact Polibi customer support. Keep your purchase receipt and model number (B0FM3XGX96) handy for faster service.
Polibi Customer Support: Refer to the contact information provided with your purchase or visit the official Polibi websitio.
