Introducción
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Sanyipace SV01W-EU Smart Bidet Toilet Seat. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Información de seguridad
Siga siempre las precauciones básicas de seguridad al utilizar aparatos eléctricos para reducir el riesgo de incendio, descarga eléctrica y lesiones.
- Asegúrese de que la toma de corriente esté correctamente conectada a tierra.
- Do not immerse the product in water or spray water directly onto the main unit.
- No intente reparar ni desmontar la unidad usted mismo. Contacte con personal de servicio técnico cualificado.
- Unplug the unit during electrical storms or when unused for extended periods.
- Mantenga el cable de alimentación alejado de superficies calientes.
- Este aparato no está diseñado para ser utilizado por personas (incluidos niños) con capacidades físicas, sensoriales o mentales reducidas, o con falta de experiencia y conocimientos, a menos que hayan recibido supervisión o instrucciones sobre el uso del aparato por parte de una persona responsable de su seguridad.
Características del producto
The Sanyipace SV01W-EU Smart Bidet Toilet Seat offers a range of advanced features designed for comfort and hygiene:
- Tapa automática: Contactless opening and closing of the lid and seat via sensor technology for enhanced hygiene.
- Múltiples modos de limpieza: Features rear wash, feminine wash, and oscillating massage with adjustable water temperature and pressure.
- Asiento con calefacción: Dual heating system with 4 temperature levels or intelligent automatic mode for optimal comfort, especially in cold weather.
- Secador de aire caliente: Adjustable warm air drying function to reduce toilet paper usage and enhance comfort.
- Control dual: Convenient operation via a tactile rotary knob on the side and a programmable remote control.
- Boquillas autolimpiables: Automatic self-cleaning of the bidet nozzles before and after each use.
- Modo de ahorro de energía: Eco-friendly mode to optimize power consumption.
Lista de componentes
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- Smart Bidet Toilet Seat Unit
- Placa de montaje
- Rubber Expansion Dowels (x2)
- Tornillos de montaje y arandelas
- T-connector for Water Supply
- Filtro de agua
- Manguera de agua flexible
- Control remoto con soporte de pared
- Manual de usuario (este documento)
Instalación
Follow these steps for a quick and easy installation. No special tools are required.
1. Confirm Toilet Size Compatibility
Before installation, ensure your toilet is compatible with the bidet seat dimensions. Refer to the diagram below for measurements.
Image: Diagram illustrating how to measure your toilet for compatibility with the Sanyipace SV01W-EU bidet seat. Key dimensions include length, width, and bolt hole spacing.
- Measure the distance from the toilet tank to the front edge of the bowl (should be ≥50cm).
- Measure the distance between the mounting bolt holes (typically 11cm - 19cm).
- Measure the inner length of the toilet bowl (should be ≥35cm).
2. Install Rubber Expansion Dowels
Insert the two rubber expansion dowels into the designated screw holes on your toilet bowl.
Image: Step-by-step installation guide. The first panel shows inserting rubber expansion dowels into the toilet's mounting holes.
3. Mount the Fixing Plate
Place the small round metal washers and the rectangular metal bracket onto the screws. Secure the mounting plate to the toilet bowl using the provided screws. Adjust the position before fully tightening the screws.
Image: Step-by-step installation guide. The second panel shows attaching the mounting plate to the toilet bowl using screws and washers.
4. Attach the Toilet Seat
Align the smart bidet toilet seat parallel to the mounted fixing plate and slide it straight back until it clicks into place and is firmly seated.
Image: Step-by-step installation guide. The fourth panel shows sliding the bidet toilet seat onto the previously installed mounting plate until it locks.
5. Establish Water Connection
Turn off the main water supply to your toilet. Disconnect the existing water supply hose from the toilet tank. Install the provided T-connector between the angle valve and the toilet tank's water inlet. Connect the flexible water hose from the bidet seat to the T-connector, ensuring the water filter is in place. Secure all connections tightly to prevent leaks.
Image: Step-by-step installation guide. The fifth panel illustrates connecting the bidet seat to the water supply using a T-connector and an inline water filter.
6. Power Connection and Initial Operation
Plug the power cord into a grounded electrical outlet. Turn on the main water supply. Test all functions of the toilet seat to ensure proper operation.
Image: Step-by-step installation guide. The sixth panel shows plugging the bidet seat into an electrical outlet and preparing for functional testing.
Nota: The product description mentions an "aroma function" and "Duftstoffbehälter befüllen" (fill fragrance container) in the installation image. This is not explicitly detailed in the feature bullets, but the image shows a step for it. I will add a small note about it.
Optional: Fill Fragrance Container
If your model includes an aroma function, open the fragrance opening on the top side of the toilet seat, insert a fragrance tablet, and close the lid.
Image: Step-by-step installation guide. The third panel shows opening a compartment on the toilet seat to insert a fragrance tablet.
Operación
Your Sanyipace Smart Bidet Toilet Seat can be controlled via the rotary knob on the side of the unit or the wireless remote control.
Sistema de control dual
Imagen: Más alláview of the dual control system, featuring the side-mounted rotary knob and the comprehensive remote control with various function buttons and a display.
- Botón giratorio: Provides quick access to basic functions like rear wash and feminine wash. Pressing the knob activates the warm air dryer.
- Mando a distancia: Offers precise control over all functions, including water pressure, temperature, nozzle position, seat temperature, and drying intensity. It features an intuitive icon display for easy navigation.
Bidet Functions (Warm Water Cleaning)
Imagen: interna view of the bidet system, highlighting constant temperature water delivery, separate filtered water supply, and automatic nozzle self-cleaning.
- Lavado trasero: For general posterior cleaning.
- Lavado femenino: A softer, wider spray for intimate feminine hygiene.
- Masaje oscilante: The nozzle moves back and forth for a broader and more thorough cleaning experience.
- Temperatura del agua: Adjust the water temperature to your preference (4 levels). The ceramic heater provides instant and constant warm water.
- Presión del agua: Adjust the water spray intensity from gentle to strong.
- Posición de la boquilla: Ajuste la posición hacia adelante o hacia atrás de la boquilla para una limpieza óptima.
- Automatic Nozzle Self-Cleaning: The nozzles automatically clean themselves before and after each use.
- Separate, Filtered Water Supply: Ensures hygienic cleaning with filtered water.
Heated Seat Function
Image: Illustration of the heated seat function, displaying three temperature levels (34°C, 37°C, 40°C) and an intelligent seasonal temperature adjustment feature.
- Ajuste de temperatura: Select from 4 temperature levels (e.g., 34°C, 37°C, 40°C) for the seat.
- Control de temperatura inteligente: The seat can automatically adjust its temperature based on ambient conditions, optimizing energy consumption. Activate "Seasonal Temperature Sensor" mode via the remote.
- The seat heats up quickly and includes overheat protection for safety.
Función de secador de aire caliente
Image: Depiction of the warm air drying system, showing adjustable temperature settings (room temperature, 45°C, 50°C, 55°C) and highlighting quick drying, toilet paper saving, and skin comfort.
- Temperatura de secado: Adjust the warm air temperature (e.g., room temperature, 45°C, 50°C, 55°C).
- Secado rápido: The dryer provides efficient drying in approximately 30 seconds, reducing the need for toilet paper.
Operación automática de la tapa
- The lid and seat automatically open when a user approaches and close silently after use, thanks to integrated motion sensors.
- This feature promotes hygiene by minimizing contact and reduces noise with a soft-closing mechanism.
Mantenimiento
La limpieza y el mantenimiento regulares garantizarán la longevidad y el funcionamiento higiénico de su asiento de inodoro bidé.
- Limpieza exterior: Limpie las superficies exteriores con un paño suave, damp cloth and a mild, non-abrasive cleaner. Do not use harsh chemicals, abrasive pads, or solvents.
- Limpieza de boquillas: The bidet nozzles perform an automatic self-cleaning cycle. For deeper cleaning, you can manually extend the nozzles (refer to remote control functions) and gently wipe them with a soft brush or cloth.
- Filtro de agua: Periodically check and replace the water filter as needed to maintain optimal water quality for the bidet function. Refer to the filter manufacturer's instructions for replacement frequency.
- Descalcificar: If you live in an area with hard water, descaling may be necessary. Consult a professional or refer to specific descaling instructions if provided with the product.
- Apagado: Desenchufe siempre la unidad antes de realizar cualquier limpieza o mantenimiento.
Solución de problemas
Si encuentra algún problema, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| Sin energía / La unidad no se enciende | Power cord unplugged, circuit breaker tripped, power outlet malfunction. | Ensure power cord is securely plugged in. Check circuit breaker. Test outlet with another device. |
| Sin rociado de agua / Rociado débil | Válvula de suministro de agua cerrada, filtro de agua obstruido, boquilla bloqueada. | Open the water supply valve. Check and replace water filter if necessary. Clean the bidet nozzle. |
| La temperatura del agua no está caliente | Heater setting too low, energy-saving mode active. | Adjust water temperature setting via remote. Deactivate energy-saving mode if desired. |
| El asiento calefaccionado no funciona | Seat temperature setting too low, intelligent temperature control active. | Adjust seat temperature setting. Check if intelligent temperature control is overriding manual settings. |
| La tapa no se abre/cierra automáticamente | Motion sensor obstructed or dirty, sensor sensitivity setting. | Clean the motion sensor. Refer to the remote control for sensor sensitivity adjustments. |
| Fuga de agua | Loose water connections, damaged hose/seal. | Turn off water supply immediately. Check all water connections and tighten if loose. Inspect hoses and seals for damage. Contact customer support if leakage persists. |
If the problem persists after attempting these solutions, please contact Sanyipace customer support.
Presupuesto
- Modelo: SV01W-EU
- Marca: sanyipace
- Dimensiones del producto (L x An x Al): 50 x 37 x 2.51 cm (19.7 x 14.6 x 1.0 pulgadas)
- Peso: 4.97 kg (10.96 libras)
- Material: Cloruro de polivinilo (PVC)
- Color: Blanco
- Forma: V-Shape
- Fuente de alimentación: [Vol.tage/Frequency - typically 220-240V for EU, not specified in JSON]
- Rango de presión del agua: [Not specified in JSON]
- Rango de temperatura del agua: Adjustable (e.g., 34°C - 40°C)
- Seat Temperature Range: Adjustable (e.g., 34°C - 40°C)
- Dryer Temperature Range: Adjustable (e.g., Room Temp - 55°C)
Garantía y soporte
Sanyipace products are designed for quality and reliability. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Sanyipace website. Please have your model number (SV01W-EU) and purchase date available when contacting support.
Fabricante: sanyipace
