1. Introducción
This manual provides essential information for the safe and efficient operation of your OOYCYOO 80 Amp MPPT Solar Charge Controller. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your solar power system. This controller is designed to maximize power harvest from your solar panels and efficiently charge various battery types in 12V, 24V, 36V, and 48V systems.
2. Información de seguridad
Observe siempre las siguientes precauciones de seguridad durante la instalación y el funcionamiento:
- Ensure all connections are secure and correct polarity is maintained to prevent damage to the controller, batteries, or solar panels.
- Install appropriate circuit breakers for each line (solar array, battery, load) to protect against overcurrent.
- Evite cortocircuitar los terminales.
- No intente desmontar ni reparar el controlador usted mismo. Consulte a personal cualificado.
- Instale el controlador en un área bien ventilada, lejos de materiales inflamables y de la luz solar directa.
- Utilice equipo de protección personal (EPP) adecuado durante la instalación.
3. Características del producto
- Efficient 80A MPPT Technology: Compatible con sistemas de 12V/24V/36V/48V vol.tages, featuring Maximum Power Point Tracking (MPPT) technology with tracking efficiencies up to 99% and peak conversion efficiencies up to 98%.
- Amplia compatibilidad de baterías: Supports various 12/24/36/48V battery types, including Lead-acid (Sealed, Gel, AGM, Flooded) and Lithium batteries.
- Protección integral: Built-in PV array short-circuit protection, PV input over-current protection, load short-circuit protection, PV polarity reversal protection, battery polarity reversal protection, over-temperature protection, Lithium battery low temperature protection, night reverse charging, battery over voltage, and load overload.
- Alto voltagSoporte e/Power: Acepta vol solartage up to 150V. Max input power: 1000W (12V system), 2000W (24V system), 3000W (36V system), 4000W (48V system).
- Sistema de refrigeración dual: Constructed with die-cast aluminum for excellent heat dissipation and reduced power consumption. Features an upgraded turbofan fan for efficient cooling (activates at >45°C, turns off <40°C).
- Pantalla LCD: Provides real-time energy statistics and operating data for easy monitoring.
4. Contenido del paquete
El paquete normalmente incluye:
- OOYCYOO 80 Amp Controlador de carga solar MPPT
- Herrajes de montaje (tornillos, anclajes de pared)
- cable del sensor de temperatura
- Manual de usuario
Image: OOYCYOO 80 Amp MPPT Solar Charge Controller with included mounting hardware, temperature sensor, and manual.
5. Configuración e instalación
Siga estos pasos para una correcta instalación:
- Montaje del controlador:
Mount the controller vertically on a wall or sturdy surface in a well-ventilated area, ensuring ample space for heat dissipation. Use the provided screws and wall anchors. Ensure controllers are at the same horizontal level with ample space for heat dissipation between devices if installing multiple units.
Video: Demonstrates mounting the controller on a wall using screws.
- Secuencia de cableado:
Always connect in the following order: Battery > Solar Array > Load. Desconecte en el orden inverso.
- Conecte la batería: Connect the battery positive and negative terminals to the controller's battery terminals. Ensure correct polarity.
- Conecte el panel solar: Connect the solar panel positive and negative terminals to the controller's solar array terminals. Ensure correct polarity.
- Conectar la carga: Conecte su carga de CC a las terminales de carga del controlador.
Image: A diagram illustrating the correct wiring sequence for the solar charge controller, connecting solar panels, battery, and load.
Video: Demonstrates the wiring process for the MPPT solar charge controller, connecting to a battery and a load.
- Conectar el sensor de temperatura: Plug the temperature sensor cable into the designated port on the controller. This ensures accurate temperature compensation for battery charging.
- Toma de tierra: Properly ground the controller to prevent electrical hazards.
- Parallel Installation (Optional): If installing multiple controllers in parallel, connect them using the parallel communication cable.
Video: Guide on assembling and connecting the parallel communication cable for multiple MPPT controllers.
6. Instrucciones de funcionamiento
6.1. Pantalla LCD encimaview
The LCD display provides real-time information about your solar system. Use the buttons below the screen to navigate through different parameters.
Imagen: Detallada view of the MPPT Solar Charge Controller's LCD display and various connection ports, including Solar Panel, Battery, Load, USB, Remote Temp Sensor, and RS485 Communication Port.
6.2. Selección del tipo de batería
The controller supports automatic recognition of system voltage (12V/24V/36V/48V). You can manually select the battery type (Lead-acid, Gel, AGM, Flooded, Lithium) through the LCD interface to optimize charging parameters.
Image: Illustrates the controller's compatibility with various battery types (GEL, AGM, USER, SEL, FLD, LI, LiFePO4) and a typical three-stage charging curve (Bulk Charge, Constant Charging, Float Charge).
6.3. Operación en paralelo
When operating multiple controllers in parallel, ensure the main controller is configured first. Slave controllers will automatically synchronize their configurations with the main controller.
7. Mantenimiento
- Inspeccione periódicamente todas las conexiones del cableado para comprobar su estanqueidad y ausencia de corrosión.
- Keep the controller's cooling fins and fan vents clear of dust and debris to ensure efficient heat dissipation.
- Check the LCD display periodically for any error codes or unusual readings.
- Ensure the battery terminals are clean and free of oxidation.
8. Solución de problemas
8.1. Problemas comunes y soluciones
- Sin pantalla/Sin energía: Check battery connections and ensure the battery circuit breaker is closed. Verify battery voltage está dentro del rango operativo.
- La batería no se carga: Verifique las conexiones del panel solar y asegúrese de que reciban suficiente luz solar. Verifique el volumen del panel solar.tage is within the controller's input range. Confirm correct battery type selection.
- Alto voltage Advertencia: This may occur if the solar array's open circuit voltage (Voc) exceeds the controller's maximum input voltage (150V). Reconfigure your solar array to stay within limits.
- Battery Management System (BMS) Shutdown: If your lithium battery's BMS has shut down due to low voltage, it may need activation.
Video: Provides methods to reactivate a 12V or 24V lithium battery if its Battery Management System (BMS) has shut down.
9. Especificaciones
| Característica | Especificación |
|---|---|
| Marca | OOYCYOO |
| Modelo | 80A MPPT Charge Controller |
| Vol del sistematage | 12V/24V/36V/48V Automático |
| Volumen máximo de entrada de PVtage | 150 V |
| Potencia máxima de entrada (sistema de 12 V) | 1000 W |
| Potencia máxima de entrada (sistema de 24 V) | 2000 W |
| Potencia máxima de entrada (sistema de 36 V) | 3000 W |
| Potencia máxima de entrada (sistema de 48 V) | 4000 W |
| Tipos de baterías compatibles | Lead-acid (Sealed, Gel, AGM, Flooded), Lithium |
| Peso del artículo | 8.58 libras |
| Dimensiones del paquete | 12.2 x 8.27 x 4.72 pulgadas |
| Componentes incluidos | Controller, Temperature Sensor |
| Código Postal | 750864834463 |
10. Garantía y soporte
For warranty information, technical support, or service inquiries, please contact OOYCYOO customer service directly. Refer to the product packaging or the official OOYCYOO websitio para detalles de contacto.
