1. Introducción
This manual provides essential information for setting up, operating, maintaining, and troubleshooting your ATK Blazing Sky F1 V2 Wireless Gaming Mouse. Please read these instructions carefully to ensure optimal performance and longevity of your device.
Image 1.1: The ATK Blazing Sky F1 V2 Wireless Gaming Mouse.
2. Producto terminadoview
The ATK Blazing Sky F1 V2 is a high-performance wireless gaming mouse designed for competitive play. It features an ultra-lightweight design, advanced sensor technology, and multiple connectivity options.
2.1 Características principales
- Diseño liviano: Weighs approximately 39g (Ultimate model), optimized for fast movements and precision control.
- Sensor avanzado: Equipped with the PAW3950 Ultra sensor for superior tracking accuracy.
- High-Speed MCU: Features a Nordic 54L15 MCU for rapid response times and stable signal processing.
- Interruptores ópticos: Utilizes durable and responsive optical switches for consistent click performance.
- Tasa de sondeo dual 8K: Supports up to 8000 Hz polling in both wired and 2.4G wireless modes for minimal latency.
- Conectividad de modo dual: Offers 2.4G wireless and wired connection options.
- Batería de larga duración: Provides up to 250+ hours of usage on a single charge (Ultimate model).
Image 2.1: Ergonomic design for small to medium hands.
Image 2.2: The ultra-lightweight construction of the F1 V2 mouse.
3. Configuración
3.1 Contenido del paquete
Verifique que su paquete contenga los siguientes elementos:
- ATK Blazing Sky F1 V2 Wireless Gaming Mouse
- 2.4G Wireless Dongle (GEM 8K Dongle)
- Cable de carga/datos USB-C a USB-A
- Manual de usuario (este documento)
3.2 Conexión del ratón
3.2.1 Modo inalámbrico 2.4G
- Inserte el adaptador inalámbrico 2.4G en un puerto USB disponible en su computadora.
- Encienda el mouse utilizando el interruptor de encendido ubicado en la parte inferior del mouse.
- The mouse should automatically connect to the dongle. If not, press the pairing button (if available, refer to the mouse's underside) or consult the ATK software for pairing instructions.
Image 3.1: The GEM 8K Dongle for wireless connectivity.
3.2.2 Modo cableado
Connect the USB-C end of the provided cable to the mouse and the USB-A end to your computer. The mouse will function in wired mode and charge simultaneously.
3.3 Carga del ratón
To charge the mouse, connect it to your computer or a USB power adapter using the provided USB-C cable. The LED indicator on the mouse will show charging status. For optimal charging, use the original USB cable.
Image 3.2: High-density battery information.
3.4 Instalación del software
For advanced customization, including DPI settings, button remapping, and polling rate adjustments, download the official ATK software from the ATK webSitio. Siga las instrucciones en pantalla para la instalación.
4. Instrucciones de funcionamiento
4.1 Funciones básicas del ratón
The ATK F1 V2 mouse features standard left-click, right-click, and scroll wheel functions. Additional side buttons are programmable via the ATK software.
4.2 Ajuste de ppp
The mouse's DPI (Dots Per Inch) can be adjusted to suit your preference. The PAW3950 Ultra sensor supports a DPI range from 100 to 30,000 DPI, with effective interpolation up to 42,000 DPI. Use the dedicated DPI button (if present) or the ATK software to cycle through preset DPI stages or set a custom value.
Image 4.1: PAW3950 Ultra Sensor capabilities.
4.3 Configuración de la tasa de sondeo
The ATK F1 V2 supports a polling rate of up to 8000 Hz, providing extremely low latency. This setting can be configured through the ATK software to match your system and gaming requirements.
Image 4.2: Nordic 54 Series MCU and ApexShark MAX solution details.
4.4 Personalización de botones
Utilize the ATK software to remap buttons, assign macros, and configure other advanced settings to personalize your gaming experience.
Image 4.3: Details on the custom-tuned switches.
5. Mantenimiento
5.1 Limpieza
The ATK F1 V2 features an all-new nano coating that is sweat-resistant, stain-resistant, and easy to clean. To clean your mouse:
- Ensure the mouse is powered off and disconnected from any power source.
- Utilice un paño suave y sin pelusa ligeramenteamplimpiado con agua o una solución de limpieza suave.
- Evite utilizar productos químicos agresivos, materiales abrasivos o humedad excesiva.
- Clean the sensor area gently with a cotton swab to remove dust or debris.
5.2 Cuidado de la batería
- Evite descargar completamente la batería con frecuencia.
- Guarde el ratón en un lugar fresco y seco cuando no lo utilice durante períodos prolongados.
- Utilice únicamente el cable de carga proporcionado o un equivalente certificado.
6. Solución de problemas
6.1 El ratón no responde
- Compruebe si el ratón está encendido.
- Ensure the 2.4G dongle is securely plugged into a USB port or the USB cable is properly connected.
- Verifique que la batería del mouse tenga suficiente carga.
- Try connecting the mouse to a different USB port or computer to rule out port-specific issues.
6.2 Problemas de conectividad (inalámbrica)
- Ensure the dongle is within close proximity to the mouse and not obstructed by metal objects.
- Evite interferencias de otros dispositivos inalámbricos (por ejemplo, enrutadores Wi-Fi, otros periféricos inalámbricos).
- Re-pair the mouse with the dongle using the ATK software or the pairing button on the mouse.
6.3 Problemas de carga
- Confirm the charging cable is fully inserted into both the mouse and the power source.
- Pruebe con un puerto USB o adaptador de corriente diferente.
- Asegúrese de que el cable no esté dañado.
6.4 Problemas de seguimiento del sensor
- Limpie el sensor del ratón con un hisopo de algodón.
- Asegúrese de utilizar el mouse sobre una superficie limpia y uniforme o sobre una alfombrilla de alta calidad.
- Adjust LOD (Lift-Off Distance) settings in the ATK software if tracking is inconsistent when lifting the mouse.
7. Especificaciones
The following table outlines the technical specifications for the ATK Blazing Sky F1 V2 Wireless Gaming Mouse (Ultimate model):
Image 7.1: Product Specifications Table.
| Característica | Specification (F1 V2 Ultimate) |
|---|---|
| Modelo | ATK F1 V2 |
| Dimensiones | 118.2 × 62.4 × 38.8 mm |
| Peso | 39 ± 2g |
| Sensor | PAW3950 Ultra |
| MCU | Nórdico 54L15 |
| Interruptores | Interruptores ópticos personalizados ATK |
| Tasa de sondeo | 8K dual con cable/inalámbrico |
| Button Latency | 0.163 ms |
| Batería | 300 mAh |
| Duración de la batería | 250+ horas |
| Conectividad | 2.4G / Wired |
| Revestimiento | All-New Nano Coating |
| Rueda de desplazamiento | TTC Oro |
| Patas de ratón | Standard White Double-Layer Anti-Dent PTFE feet + Bonus Set |
| Llave electrónica | All-New GEM 8K Dongle |
8. Garantía y soporte
For warranty information, technical support, and frequently asked questions, please visit the official ATK website or contact ATK customer service. Keep your proof of purchase for warranty claims.