Introducción
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Life KRV306 Robot Vacuum Cleaner and Mop. The KRV306 is an intelligent 2-in-1 cleaning device designed to vacuum and mop various floor types, offering convenience and efficiency for daily home cleaning.
1. Configuración
1.1 Desembalaje
Retire con cuidado todos los componentes del embalaje. Asegúrese de que estén todos los accesorios:
- Life KRV306 Robot Vacuum Cleaner
- Cable/adaptador de carga
- Basura
- Mopping Pad (if pre-installed or separate)
- Cepillos laterales
- Manual de usuario (este documento)
1.2 Carga inicial
Before first use, fully charge the robot. Connect the charging cable to the robot and a power outlet. The indicator light will show charging status. A full charge takes approximately 3 to 4 hours.
1.3 Instalación de cepillos laterales
Align the side brushes with the corresponding posts on the bottom of the robot and press down until they click into place.
1.4 Installing the Dustbin and Mopping Pad
Insert the dustbin into its designated slot until it is securely in place. If using the mopping function, attach the mopping pad to the bottom of the water tank (if separate) or directly to the robot as per design.
2. Instrucciones de funcionamiento
2.1 Encendido / Apagado
Press and hold the power button on the robot for a few seconds to turn it on or off. A chime or indicator light will confirm the status.
2.2 Modos de limpieza
The KRV306 offers three optimized cleaning modes:
- Modo automático: The robot cleans in a zigzag pattern, covering large areas efficiently. This is the default mode for general cleaning.
- Modo puntual: For concentrated dirt, the robot cleans intensively in a circular pattern. Place the robot directly over the area to be cleaned and select this mode.
- Modo de borde: The robot follows walls and furniture edges to ensure thorough cleaning of corners and baseboards.
To select a cleaning mode, press the appropriate button on the robot or use the remote control (if included).
2.3 Inicio de un ciclo de limpieza
Press the "Start" or "Clean" button on the robot. The robot will begin cleaning in the selected mode. Ensure the floor is free of large obstacles and loose cables.
2.4 Pausa y reanudación
To pause a cleaning cycle, press the "Start/Pause" button. Press it again to resume cleaning.
2.5 Returning to Charger
When the battery is low, the robot will automatically attempt to return to its charging base. You can also manually send it back by pressing the home/charge button.
3. Mantenimiento
El mantenimiento regular garantiza un rendimiento óptimo y prolonga la vida útil de su robot aspirador.
3.1 Vaciado del cubo de basura
Image: The Life KRV306 robot vacuum cleaner demonstrating its large dustbin capacity, designed to hold more debris per clean and reduce emptying frequency. The image shows the robot on a wooden floor, actively vacuuming various types of debris including hair, pet hair, confetti, dust, and general debris, with an inset showing the removable dustbin component.
Empty the dustbin after each cleaning cycle or when full. Press the release button to remove the dustbin, open its lid, and discard the collected debris. Clean the filter regularly by tapping it gently to remove dust or rinsing it with water if specified (ensure it's completely dry before reinstallation).
3.2 Limpieza de la almohadilla de fregado
Remove the mopping pad after each use. Rinse it thoroughly with water and mild detergent if necessary. Allow it to air dry completely before reattaching or storing.
3.3 Limpieza de los cepillos laterales
Periodically check the side brushes for tangled hair or debris. Remove any obstructions carefully. If brushes are worn or damaged, replace them.
3.4 Limpieza de sensores
Image: The Life KRV306 robot vacuum cleaner positioned near a set of stairs, illustrating its anti-falling capability. The image highlights the infrared sensors that detect drops, preventing the robot from falling down stairs or off ledges.
Wipe the anti-falling infrared sensors and other sensors on the robot's underside with a clean, dry cloth to ensure they function correctly and prevent navigation issues.
4. Solución de problemas
Consulte esta sección para conocer problemas comunes y sus soluciones.
4.1 Robot Not Moving or Getting Stuck
Image: The Life KRV306 robot vacuum cleaner demonstrating its ability to navigate over thresholds up to 10mm high, ensuring continuous cleaning across different rooms without getting stuck. The image shows the robot smoothly transitioning from one floor level to another.
- Compruebe si hay obstáculos: Ensure there are no loose cables, rugs, or small objects obstructing the robot's path. The robot is designed to handle thresholds up to 10mm.
- Clean Wheels and Brushes: Remove any hair or debris tangled around the wheels or side brushes.
- Obstrucción del sensor: Clean the anti-falling sensors and bumper sensors.
4.2 Rendimiento de limpieza deficiente
- Cubo de basura vacío: A full dustbin or clogged filter can reduce suction power. Empty the dustbin and clean the filter.
- Pinceles limpios: Ensure side brushes are free of debris and spinning correctly.
- Nivel de batería: Ensure the robot is fully charged for optimal performance.
4.3 El robot no se carga
- Comprobar conexiones: Ensure the charging cable is securely connected to both the robot and the power outlet.
- Contactos de carga limpios: Limpie los contactos de carga tanto del robot como de la base de carga con un paño seco.
4.4 Robot Bumping into Furniture Excessively
Image: The Life KRV306 robot vacuum cleaner demonstrating its collision mechanical bumper. The robot is shown gently encountering a chair leg, indicating its ability to soft-hit obstacles and automatically adjust its path without causing damage to furniture.
- Clean Bumper Sensors: Ensure the bumper area is clean and free from obstructions.
- Condiciones de iluminación: In very dark environments, obstacle detection might be less effective.
5. Especificaciones
| Característica | Especificación |
|---|---|
| Modelo | KRV306 |
| Funciones | Vacuuming, Mopping |
| Poder de succión | 400 PA |
| Nivel de ruido | Máximo 68 dB |
| Tipo de batería | 1500mAh Iones de litio |
| Tiempo de ejecución | 60 - 80 minutos |
| Tiempo de carga | 3 - 4 horas |
| Dimensiones (L x An x Al) | 29 x 29 x 7.2 cm |
| Peso del producto | 2.1 kilogramos |
| Características especiales | Low noise, Compact, Rechargeable, Anti-falling sensors, Collision bumper |
6. Información de garantía
The Life KRV306 Robot Vacuum Cleaner and Mop comes with a Garantía de 90 días A partir de la fecha de compra. Esta garantía cubre defectos de fabricación y mal funcionamiento en condiciones normales de uso. No cubre daños causados por mal uso, accidentes, reparaciones no autorizadas ni desgaste normal. Conserve su comprobante de compra para reclamaciones de garantía.
7. Atención al cliente
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact our customer support. Refer to your purchase documentation or the retailer's webSitio para obtener detalles de contacto específicos.
Al contactar con el soporte técnico, tenga a mano la siguiente información:
- Modelo del producto: Life KRV306
- Fecha de compra
- Descripción del problema
