Módulo controlador de autonomía Carnegie Robotics 55001384

Presupuesto

• Fabricante: Robótica Carnegie
• Número de modelo: 55001384
• Instrucciones de integración: KDB 996369 D03 OEMManual v01

Descripción

Qualcomm® Robotics RB5 Core Kit consisting of Thundercomm TurboX C865 System on Module with customization around 12GB Ram and external antennas enabled for system integration. See Qualcomm or Thundercomm hardware manuals for specifications to each product.

Instrucciones de integración para fabricantes de productos host según KDB 996369 D03 OEM Manual v01 (reconocido por ISED)

Lista de normas aplicables de la FCC

1. CFR 47 FCC PART 15 SUBPART C&E has been investigated. It is applicable to the modular. Specifically, an assessment of the worst case operating conditions has to be performed by the module integrator and tested on the host product for compliance to FCC part 15.247 and part 15.407.

Condiciones específicas de uso operativo

1. Este módulo es un módulo independiente. Si el producto final implicará la condición de transmisión simultánea múltiple o diferentes condiciones operativas para un transmisor modular independiente en un host, el fabricante del host debe consultar con el fabricante del módulo sobre el método de instalación en el sistema final.
2. Procedimientos de módulos limitados. – No aplicable
3. Diseños de antenas de rastreo. – No aplicable

Consideraciones sobre la exposición a radiofrecuencias

1. To maintain compliance with FCC’s and ISED’s RF Exposure guidelines, this equipment should be installed and operated at a minimum distance of 20cm from your body.

Antenas

1.  This radio transmitter FCC ID: 2AMDR-55001384 / IC: 24410-55001384 has been approved by the Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

Interno Identificación	Descripción de la antena	Tipo de antena	Ganancia máxima de antena
Antena 0**	Antena Wi-Fi	Antena externa 2X MIMO WIFI	2.4G Wi-Fi: 1.2 dBi, 5G Wi-Fi: 2.0dBi
Antena 1	Antena Wi-Fi	Antena externa 2X MIMO WIFI	2.4G Wi-Fi: 1.2 dBi, 5G Wi-Fi: 2.0dBi

• Bluetooth has been disabled on device and has not been tested

Antennas Tested

• Abracon Part Number AECW0401W2-0600F_DS
• Taoglas MA210.K.CG.001

Información sobre etiquetas y cumplimiento.

1. The final end product must be labeled in a visible area with the following: Contains FCC ID: 2AMDR-55001384, IC: 24410-55001384

Información sobre los modos de prueba y requisitos de prueba adicionales

1. The Host manufacturers are strongly recommended to confirm compliance with FCC and ISED requirements for the transmitter when the module is installed in the host.  Additional testing, Part 15 Subpart B and ICES-003 disclaimer The host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as FCC Part 15 B and ICES-003.

Precaución de la FCC

• Cualquier cambio o modificación no aprobado expresamente por la parte responsable del cumplimiento podría anular la autoridad del usuario para operar el equipo.

FCC and ISED Statements

This device complies with Part 15 of the FCC Rules and with ICES-003 of the ISED rules. Operation is subject to the following two conditions:

1. Este dispositivo no puede causar interferencias dañinas y
2. Este dispositivo debe aceptar cualquier interferencia recibida, incluida aquella que pueda provocar un funcionamiento no deseado.

NOTA IMPORTANTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of the ISED Canada rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorientar o reubicar la antena receptora.
• Aumente la separación entre el equipo y el receptor.
• Conecte el equipo a una toma de corriente de un circuito diferente al que está conectado el receptor.
• Consulte al distribuidor o a un técnico de radio/TV experimentado para obtener ayuda.

Statements regarding human exposure

• With respect to radiofrequency radiation exposure Information, it is declared that this equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment.
  • This equipment should be installed and operated at a minimum distance of 20 cm between the radiator and your body.
  • Este transmisor no debe ubicarse ni utilizarse junto con ninguna otra antena o transmisor.

Preguntas frecuentes

What are the recommended distances for RF exposure compliance?

The equipment should be installed and operated at a minimum distance of 20cm from the body to comply with FCC's and ISED's RF Exposure guidelines.

Can I use antennas not listed in the manual?

Antenna types not included in the approved list are strictly prohibited for use with this device to maintain compliance.

Documentos / Recursos

Módulo controlador de autonomía Carnegie Robotics 55001384 [pdf] Manual de instrucciones 55001384, 2AMDR-55001384, 2AMDR55001384, 55001384 Módulo controlador de autonomía, 55001384, Módulo controlador de autonomía, Módulo controlador, Módulo

Referencias

• Manual de usuario